1. Introduction
The LILYGO® LoRa32 V1.3 is a versatile development board integrating ESP32 for Wi-Fi and Bluetooth connectivity, and an SX1276 LoRa module for long-range wireless communication. It is designed for various IoT applications, offering a compact form factor and a 0.96-inch OLED screen (optional) for display purposes. This manual provides essential information for setting up, operating, and maintaining your LoRa32 V1.3 board.
Key Improvements in LoRa V1.3 (compared to V1.0):
- Optimized low power design for extended battery life.
- Enhanced LoRa RF circuit for improved performance.
- Added battery voltage detection on Pin IO35.
2. Specifications
2.1 Hardware Specifications
| Feature | Description |
|---|---|
| Chipset | ESPRESSIF-ESP32 (Wi-Fi & Bluetooth) 240MHz Xtensa® single-/dual-core 32-bit LX6 microprocessor |
| Module | SX1276 |
| FLASH | QSPI flash 4MB |
| SRAM | 520 kB SRAM |
| Button | BOOT, REST |
| USB to TTL | CH9102F |
| Modular interface | UART, SPI, SDIO, I2C, PWM, I2S, ADC, DAC, Cap Sensor |
| On-board clock | 40MHz crystal oscillator |
| Working voltage | About 2.7V-3.6V |
| Sleep current | About 600uA |
| Working temperature range | -40℃ ~ +85℃ |
| Screen | 0.96 Inch OLED (Optional) |
| Weight | 6.5g |
2.2 Power Supply Specifications
| Feature | Description |
|---|---|
| Power Supply Input | USB 5V/1A |
| Charging current | 500mA |
| Battery Input | 3.7-4.2V |
| JST Connector | 2Pin 1.25mm |
| USB | Micro USB |
2.3 Wi-Fi Specifications
| Feature | Description |
|---|---|
| Standard | FCC/CE-RED/IC/TELEC/KCC/SRRC/NCC (ESP32 chip) |
| Protocol | 802.11 b/g/n (802.11n, speed up to 150Mbps) A-MPDU and A-MSDU polymerization, support 0.4μS Protection interval |
| Frequency range | 2.4GHz~2.5GHz (2400M~2483.5M) |
| Transmit Power | 22dBm |
| Communication distance | 300m |
2.4 Bluetooth Specifications
| Feature | Description |
|---|---|
| Protocol | Meet Bluetooth v4.2BR/EDR and BLE standard |
| Radio frequency | With -97dBm sensitivity NZIF receiver Class-1, Class-2 & Class-3 emitter AFH |
| Audio frequency | CVSD & SBC audio frequency |
2.5 Software Specifications
| Feature | Description |
|---|---|
| Wi-Fi Mode | Station/SoftAP/SoftAP+Station/P2P |
| Security mechanism | WPA/WPA2/WPA2-Enterprise/WPS |
| Encryption Type | AES/RSA/ECC/SHA |
| Firmware upgrade | UART download/OTA (Through network/host to download and write firmware) |
| Software Development | Support cloud server development /SDK for user firmware development |
| Networking protocol | IPv4, IPv6, SSL, TCP/UDP/HTTP/FTP/MQTT |
| User Configuration | AT + Instruction set, cloud server, Android/iOS app |
| OS | FreeRTOS |
2.6 Physical Dimensions
3. Setup Instructions
3.1 Unpacking and Inspection
Carefully unpack the LILYGO LoRa32 V1.3 development board and its accessories. Inspect all components for any visible damage. The package typically includes the LoRa V1.3 board (with or without OLED screen), a power cable, an antenna, and two pin headers.
3.2 Assembly
- Antenna Connection: Carefully screw the provided LoRa antenna onto the U.FL connector on the board. Ensure it is securely fastened but do not overtighten.
- Pin Headers (Optional): The board is shipped without soldered pin headers by default. If you intend to use the board with a breadboard or custom wiring, you will need to solder the included pin headers to the board's GPIO pins.
- OLED Screen (if applicable): If your board includes an OLED screen, it will typically be pre-attached.
3.3 Initial Power-up
Connect the LILYGO LoRa32 V1.3 board to a computer using a Micro USB cable. The board should power on, and if equipped with an OLED screen, it may display a boot message or default information.
4. Operating Instructions
4.1 Pinout Diagram
Understanding the pinout is crucial for connecting peripherals and programming the board. Refer to the detailed pinout diagram below:
4.2 Development Environment
The LILYGO LoRa32 V1.3 board is compatible with the Arduino IDE and other ESP-IDF based development environments. You will need to install the ESP32 board support package in your chosen IDE.
4.3 Programming and Examples
For sample programs, libraries, and detailed development guides, please refer to the official LILYGO GitHub repositories:
These resources provide code examples for LoRa communication, Wi-Fi, Bluetooth, and OLED display usage.
5. Maintenance
- Handle with Care: This is a sensitive electronic component. Avoid dropping or subjecting it to physical shock.
- Keep Dry: Protect the board from moisture and liquids to prevent short circuits and corrosion.
- Cleanliness: Keep the board free from dust and debris. Use a soft, dry brush or compressed air for cleaning.
- Power Supply: Always use a stable 5V/1A power supply via the Micro USB port or a 3.7-4.2V battery connected to the JST connector.
- Static Discharge: Take precautions against electrostatic discharge (ESD) when handling the board.
6. Troubleshooting
- Board Not Powering On: Ensure the Micro USB cable is properly connected and the power source is active. If using a battery, check its charge level and connection.
- Programming Errors: Verify that the correct board and port are selected in your Arduino IDE or ESP-IDF environment. Check your code for syntax errors and ensure all necessary libraries are installed.
- LoRa Communication Issues: Confirm the antenna is securely attached. Check LoRa frequency settings in your code to match your region (868Mhz or 915Mhz).
- Wi-Fi/Bluetooth Connectivity Problems: Ensure your network credentials are correct. Check for interference from other 2.4GHz devices.
- OLED Display Not Working: If your board has an OLED, ensure it's properly connected (if detachable) and that your code initializes and writes to the display correctly.
For more in-depth troubleshooting and community support, refer to the official LILYGO GitHub repositories and forums.
7. User Tips
- Leverage GitHub Resources: The LILYGO GitHub repositories are excellent sources for technical features, sample programs, and pinout details. Regularly check for updates and community contributions.
- Battery Voltage Monitoring: Utilize the dedicated Pin IO35 for battery voltage detection to implement low-power management strategies in your projects.
- Antenna Placement: For optimal LoRa communication range, ensure the antenna is positioned away from obstructions and other electronic components.
8. What's in the Box
The standard package for the LILYGO LoRa32 V1.3 includes:
- 1 X LoRa V1.3 Development Board (OLED screen optional)
- 1 X Power Cable
- 1 X Antenna
- 2 X Pin Headers
9. Warranty and Support
For technical support, documentation, and community engagement, please refer to the official LILYGO resources:
- Official LILYGO GitHub: https://github.com/Xinyuan-LilyGO/LilyGo-LoRa-Series
- Specific V1.3-868 Branch: https://github.com/LilyGO/TTGO-LORA32-V2.0/tree/LilyGO-V1.3-868
These repositories contain the latest firmware, example code, and detailed information to assist you with your projects. For direct inquiries, please contact the LILYGO Official Store.