Candy 46007570/41035751

Contents

Candy Washing Machine Control Board Instruction Manual

Model: 46007570/41035751

1. Product Overview

This document provides essential information for the installation, operation, and maintenance of the Candy Washing Machine Control Board, model 46007570/41035751. This electronic control panel is designed as a replacement part for compatible Candy washing machines, ensuring proper functionality of the appliance's various cycles and features.

Front view of the Candy Washing Machine Control Board PCB

Figure 1: Front view of the Candy Washing Machine Control Board PCB (Model 472270 AG, Invensys)

Back view of the Candy Washing Machine Control Board PCB with part numbers

Figure 2: Back view of the control board showing Invensys P/N: 4433AA and Candy P/N: 46007570

2. Safety Information

  • Always disconnect the washing machine from the main power supply before attempting any installation, repair, or maintenance.
  • Wear appropriate personal protective equipment (PPE), such as gloves and safety glasses.
  • If you are unsure about any step, consult a qualified technician.
  • Ensure all connections are secure and correctly oriented to prevent electrical hazards or damage to the appliance.

3. Installation Guide

This control board is a replacement component. Installation typically involves removing the old board and installing the new one. Specific steps may vary depending on your washing machine model.

3.1 Pre-Installation

  1. **Disconnect Power**: Unplug the washing machine from the electrical outlet.
  2. **Access Control Panel**: Refer to your washing machine's service manual to locate and access the existing control board. This usually involves removing the top panel or front fascia.
  3. **Document Connections**: Before disconnecting any wires, take clear photos or make a diagram of all wire connections to the old control board. Note the color and position of each wire.

3.2 Board Replacement

  1. **Disconnect Wires**: Carefully disconnect all wire harnesses and connectors from the old control board.
  2. **Remove Old Board**: Unscrew or unclip the old control board from its housing.
  3. **Install New Board**: Position the new Candy Control Board (Model 46007570/41035751) into the housing. Ensure it fits securely.
  4. **Reconnect Wires**: Using your documented photos/diagrams, carefully reconnect all wire harnesses and connectors to the new board. Ensure each connection is firm and correctly seated.
  5. **Secure Panel**: Reattach any panels or fascia removed to access the control board.

3.3 Post-Installation

  1. **Restore Power**: Plug the washing machine back into the electrical outlet.
  2. **Test Functionality**: Turn on the washing machine and test various cycles and functions to ensure the new control board is operating correctly.

4. Operating Instructions

This control board is an internal component that facilitates the operation of your Candy washing machine. It does not have direct user-facing controls. For instructions on how to operate your washing machine (e.g., selecting wash cycles, setting temperatures, starting/stopping), please refer to the user manual provided with your specific Candy washing machine model.

The control board ensures that the commands you input via the washing machine's user interface are correctly processed and executed by the appliance.

5. Maintenance

The Candy Washing Machine Control Board is designed for long-term reliability and typically requires no routine maintenance. However, to ensure its longevity and proper function:

  • **Keep Dry**: Ensure the area around the control board remains dry and free from moisture to prevent short circuits or corrosion.
  • **Cleanliness**: Periodically inspect the control board area for dust or debris accumulation. If necessary, gently clean with a soft, dry brush or compressed air (ensure power is disconnected).
  • **Avoid Physical Damage**: Protect the control panel area from impacts or excessive force that could damage the internal board.

6. Troubleshooting

If your washing machine experiences issues after replacing the control board, consider the following troubleshooting steps:

  • **No Power/No Display**:
    • Check if the washing machine is properly plugged into a working electrical outlet.
    • Verify that all wire connections to the control board are secure and correctly seated.
    • Ensure the main power switch or circuit breaker for the washing machine is on.
  • **Incorrect Functionality/Error Codes**:
    • Double-check all wire connections against your pre-installation photos/diagrams to ensure no wires are misplaced.
    • Consult your washing machine's user manual for specific error code interpretations and recommended actions.
    • Ensure the control board model is compatible with your specific washing machine model.
  • **Intermittent Issues**:
    • Inspect the board for any visible signs of damage, such as burnt components or loose solder joints.
    • Ensure the board is firmly mounted and not vibrating excessively during operation.

If problems persist after performing these checks, it is recommended to contact a qualified appliance repair technician.

7. Specifications

Feature Detail
Product Type Washing Machine Parts (Control Board PCB Assembly)
Brand Candy
Model Numbers 46007570, 41035751
Invensys P/N 4433AA
Hardware Version CANW205 Rev1.0
Origin Mainland China
Color Green (PCB)
Package Dimensions (approx.) Length: 20 cm, Width: 10 cm, Height: 5 cm
Package Weight (approx.) 0.1 kg
Close-up of a label on the control board showing hardware version and customer part number

Figure 3: Label detail showing Cus.P/N: 43013568 and HW:CANW205 Rev1.0

8. Warranty and Support

For warranty claims or technical support regarding this Candy Washing Machine Control Board, please refer to the original seller or your appliance manufacturer's support channels. Ensure you retain your purchase records for any warranty inquiries.

The seller, "ihomeparts Official Store", has a positive feedback rate of 93.6% and a communication rating of 4.7, indicating a commitment to customer service.

9. User Tips

  • **Compatibility Check**: Before purchasing, always verify that the model numbers (e.g., 46007570/41035751) and any other relevant part numbers (like Invensys P/N or HW version) precisely match your existing control board or your washing machine's requirements. This is crucial for proper function.
  • **Careful Installation**: As noted by other users, if the board is identical and connected correctly, it should function without issues. Take your time during installation, especially when documenting and reconnecting wires.
  • **Professional Help**: If you are uncertain about the installation process or compatibility, it is advisable to seek assistance from a professional appliance repair technician.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.