1. Introduction
Congratulations on your purchase of the KKMOON GTX5030 Metal Detector. This device is designed for finding and testing various metal objects, including gold and silver jewelry, coins, relics, and other metallic artifacts. With its user-friendly design and advanced features, it is suitable for both budding treasure hunters and experienced hobbyists. This manual will guide you through the assembly, operation, maintenance, and troubleshooting of your metal detector.

2. Setup and Assembly
Follow these steps to assemble your metal detector and prepare it for use:
- Assemble the Stem: Connect the two sections of the connecting rod. Ensure they are securely fastened.
- Attach the Search Coil: Secure the search coil to the lower end of the stem using the provided screw nut. Route the cable along the stem.
- Mount the Control Housing: Attach the control housing to the upper part of the stem, ensuring it is firmly in place. Connect the search coil cable to the designated port on the control housing.
- Install Batteries: Open the battery compartment on the control housing. Insert two (2) 9V batteries (not included), ensuring correct polarity. Close the battery compartment cover.
- Adjust Length: Adjust the detector's stem length to a comfortable position for your height. The adjustable stem allows for lengths between 780mm and 1080mm.
- Attach Armrest: Secure the armrest to the handle for comfortable operation.

Assembly Video Guide
3. Operating Instructions
The GTX5030 Metal Detector features two primary operating modes and several adjustable controls:
Controls Overview
- POWER OFF: Turns the detector on or off.
- SENS (Sensitivity): Adjusts the detector's sensitivity to metal objects. Higher sensitivity allows for deeper detection but may increase false signals.
- VOLUME: Controls the audio level of the speaker and any connected headphones.
- DISC (Discrimination): Used in DISC mode to filter out unwanted metals. Turning the DISC knob allows you to discriminate between different types of metal.
- ALL METAL: Activates the All Metal mode.
- LOW BAT: Indicator light for low battery.
- EAR (Earphone Jack): 3.5mm jack for connecting headphones (optional).
- TARGET INDICATOR: Mechanical pointer that swings to the right when metal is detected.

Operating Modes
- All Metal Mode: This mode allows you to search for all types of metal with automatic ground balance and high sensitivity. It is generally the best mode for initial searching to ensure no targets are missed. To activate, turn the 'ALL METAL' knob.
- DISC (Discrimination) Mode: This mode allows you to differentiate between various types of metal. By adjusting the 'DISC' knob, you can filter out unwanted metals (e.g., iron nails) and focus on more valuable targets.
Detection Indication
When a metal object is detected, the device will provide two forms of indication:
- Mechanical Pointer Mode: The 'TARGET INDICATOR' needle will swing to the right.
- Audio Mode: An audible alert will sound. The pitch or intensity of the sound may vary depending on the type and size of the metal.
4. Maintenance
Proper maintenance will ensure the longevity and optimal performance of your metal detector:
- Cleaning: After each use, especially in dirty or sandy environments, wipe down the search coil and stem with a damp cloth. Ensure the control housing remains dry.
- Water Resistance: The search coil is waterproof and can be used in shallow water. However, the control housing is NOT waterproof. Avoid submerging the control housing or exposing it to heavy rain.
- Storage: Store the metal detector in a dry, cool place away from direct sunlight and extreme temperatures. Remove batteries if the detector will not be used for an extended period to prevent leakage.
- Battery Care: Replace batteries when the 'LOW BAT' indicator illuminates. Always use fresh, high-quality 9V batteries.
5. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Detector does not turn on. | Dead or incorrectly installed batteries. | Check battery polarity. Replace with fresh 9V batteries. |
| No detection or weak signals. | Low sensitivity setting, loose coil connection, or dead batteries. | Increase SENS. Ensure search coil cable is securely connected. Replace batteries. |
| False signals or erratic behavior. | High sensitivity, electrical interference, or loose connections. | Reduce SENS. Move away from power lines or other electronic devices. Check all cable connections. |
| Detector beeps constantly. | High sensitivity, ground mineralization, or nearby metal. | Lower SENS. Use DISC mode to filter out ground noise. Move to a different area. |
| Plug/coil connection is glitchy. | Loose or faulty connection. | Ensure the plug is firmly inserted. If issues persist, a direct soldering of the connection might be required by a qualified technician. |
6. Specifications
Below are the technical specifications for the GTX5030 Metal Detector:

- Material: ABS + Metal
- Operation Modes: All Metal, DISC (Discrimination)
- Sensitivity: Max. depth > 180mm (for a U.S. quarter in All Metal mode)
- Detect Objects: Metal (iron nail, iron covering, aluminum loop, small aluminum product, coins, gold, bronze, silver)
- Operating Frequency: 5.69KHz
- Power Supply: 2 * 9V batteries (not included)
- Operating Current: Standby 10mA, Max. 70mA
- Operating Voltage Range: 9V
- Detection Indication: Mechanical pointer mode, Audio mode
- Controls: Power switch, DISC, ALL METAL, VOLUME, SENS
- Adjustable Stem Height: 780mm - 1080mm (30.7in - 42.5in)
- Waterproof Search Coil Diameter: 200mm (7.9in)
- Headphone Jack: 3.5mm
- Operating Temperature: -15℃ to 45℃ (5℉ to 113℉)
- Storage Temperature: -20℃ to 60℃ (-4℉ to 140℉)
- Package Size: 540 x 220 x 110mm (21.3 x 8.7 x 4.3in)
- Package Weight: 1.25 kg (2.8 lb)
7. User Tips
Here are some helpful tips from other users to enhance your metal detecting experience:
- Gold Detection: While the detector can identify various metals, including gold, some users report varying success with small gold items. Adjusting sensitivity and discrimination settings carefully can improve results.
- Water Usage: Remember that only the search coil is waterproof. Always keep the control housing dry and avoid submerging it.
- Adjusting for Terrain: If you experience constant beeping or false signals, especially in highly mineralized soil, try lowering the sensitivity (SENS) or using the DISC mode to filter out ground noise.
- Comfort: The adjustable stem makes this detector suitable for users of various heights. Take time to find the most comfortable length for prolonged use.
- Headphone Use: Using headphones (optional) can help you hear subtle signals more clearly, especially in noisy environments, and conserve battery life.
8. Warranty and Support
For any questions, technical support, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase. Information regarding specific warranty periods and service procedures will be provided by the seller at the time of purchase.