1. Introduction
Thank you for purchasing the HM Digital AquaPro digital water tester (model AP-2). The AP-2 is an easy-to-use digital meter that measures Electrical Conductivity (EC), a key indicator of overall water purity, and also measures temperature.
The HM Digital AP-2 is suitable for a wide range of applications, including:
- Checking the performance of your water filter.
- Ensuring your drinking water is at the correct conductivity level.
- Monitoring nutrient levels in water for plants and fish.
- Testing your pool or spa water quality.
- Measuring EC levels for various other applications.

2. Safety Information and Precautions
- Water Resistance: The meter is water-resistant, but not water-tight. Do not submerge the entire meter. The warranty will be voided if water enters the unit.
- Temperature Exposure: Do not store the meter in high temperatures or direct sunlight.
- Unauthorized Modifications: Do not attempt to open the housing or tamper with the electronics of the unit. Any unauthorized work on the unit will void the warranty.
- Handling: Though durable, the AP-2 is an electronic instrument and should be treated with proper care and maintenance.
- Battery Safety: Ensure batteries are installed correctly with the positive side facing forward.
3. Product Overview
The HM Digital AP-2 EC Meter features a user-friendly design with a clear digital display and intuitive controls.

Key Features:
- Wide Range: Accommodates most applications.
- Auto Shut-Off: Shuts off automatically after 5 minutes to conserve batteries.
- Large Screen: Easy to see and share, includes simultaneous temperature reading.
- Hold Function: Allows you to view the reading out of the water.
- Thermometer: Measures temperature in Celsius (°C) or Fahrenheit (°F).
- Carrying Case: Provides protection for your meter.
- Magnetic Housing: For convenient storage on metallic surfaces.
- Automatic Temperature Compensation (ATC): Ensures accurate readings across varying temperatures (0-80°C).
- Digital Calibration: Push-button calibration for ease of use.
4. Specifications
| Attribute | Value |
|---|---|
| Model Number | AP-2 |
| Display Type | DIGITAL |
| EC Range | 0-9999 µS (µS/cm) |
| EC Resolution | 1 µS |
| Temperature Range | 0-80 °C; 32-176 °F |
| Temperature Resolution | 0.1 °C/F |
| Accuracy | +/- 2% (of the reading) |
| Automatic Temperature Compensation (ATC) | Yes (0-80°C) |
| Calibration | Factory calibrated to 1413 µS; adjustable. |
| Power Source | 1 x 3V button cell (CR2032) |
| Battery Life | Approx. 2 years |
| Dimensions | 15 x 2.8 x 1.3 cm (5.9 x 1.1 x 0.5 in.) |
| Weight | 42.5 g (1.5 oz) (without case) |
| With Backlight | No |
| Is Smart Device | No |
| DIY Supplies | Plumbing |
5. Setup
5.1. Battery Installation
The AP-2 meter uses one 3V button cell battery (model CR2032).
- Locate the battery compartment, usually at the top of the meter.
- Remove the battery compartment. It may be tight.
- Install a new CR2032 battery. Ensure the battery is properly aligned with the positive side facing forward.
- Replace the battery compartment securely.
6. Operating Instructions
6.1. Taking EC Measurements
- Remove the protective cap from the bottom of the meter.
- Turn the meter on by pressing the POWER button.
- Immerse the meter into the water/solution up to the maximum immersion level (approximately 2 inches / 4 cm).
- Lightly stir the meter to dislodge any air bubbles that may be clinging to the sensor.
- Wait until the display stabilizes. Once the reading stabilizes (approximately 10 seconds), press the HOLD button to lock the reading. This allows you to view the reading out of the water.
- After usage, shake off any excess water from your meter.
- Replace the protective cap.


6.2. Switching Temperature Modes
The temperature will always be displayed on the screen simultaneously with the EC reading.
- To switch the temperature display from Fahrenheit (°F) to Celsius (°C) and back, press the MODE button once.
- This action will toggle between the two temperature scales.
7. Calibration
Your meter has been factory calibrated to a KCI 1413 µS solution. This calibration is suitable for most applications. If you are unsure about calibration, or whether or not you need to do so, consult a professional.
Important: Do not switch the AP-2 into calibration mode unless you are certain you need to re-calibrate the meter. If you accidentally enter calibration mode, turn the meter off immediately to cancel the operation, so that you do not risk calibrating the meter to zero.
Before attempting to calibrate the AP-2, make sure to have a certified bottle of KCI or NaCl calibration solution. Any brand will work. Never calibrate the meter to distilled or de-ionized water (below 2 ppm).
For more information and complete calibration instructions, please visit: www.hmdigital.com/calibration_maintenance.html.
8. Maintenance
8.1. Cleaning
After each use, gently shake off any excess water from the electrodes and replace the protective cap. If the electrodes appear dirty, gently rinse them with clean water. Do not use abrasive materials or harsh chemicals.
8.2. Storage
When not in use, ensure the protective cap is on. The AP-2 meter features a magnetic housing, allowing it to be conveniently stored on a refrigerator or other metallic surfaces.
9. Troubleshooting
While the HM Digital AP-2 is designed for reliability, here are some general troubleshooting tips:
- Inaccurate Readings: Ensure the meter is properly calibrated. Refer to the Calibration section (Section 7).
- No Display/Flickering Display: Check the battery. Replace the CR2032 button cell if necessary, ensuring it is correctly installed.
- Slow Stabilization: Ensure the electrodes are clean and free from residue. Lightly stir the meter in the solution to remove air bubbles.
- Water Damage: If the meter has been submerged beyond the immersion level, it may be damaged. Refer to the warranty information for service options.
For persistent issues, please contact customer support.
10. User Tips
- For quick and easy access, utilize the meter's magnetic housing to store it on your refrigerator or other metal surfaces.
- Always ensure the protective cap is securely placed on the electrodes when the meter is not in use to prevent damage and keep them clean.
- When replacing the battery, double-check that the positive side is correctly oriented to ensure proper function.
- For consistent and reliable readings, perform measurements at a stable temperature, ideally within the meter's ATC range.
11. Frequently Asked Questions (FAQ)
- Q: What should I do if I receive a wrong or damaged product?
- A: Please check carefully whether the received product is the same as what you ordered. If you receive a wrong product, damaged product, or partial shipment of your order, please immediately contact the store to obtain after-sales support. We apologize for any inconvenience.
- Q: If I have other questions, what should I do?
- A: If you have any questions, please leave us a message. We will solve the problem for you during working hours. Please don't worry.
12. Warranty and Support
12.1. Two-Year Warranty
This product is warranted to the purchaser against material and workmanship for two (2) years from the date of purchase.
What is covered:
- Parts and labor, or replacement at the company's option.
- Transportation charges to the purchaser for repaired or replacement units.
What is not covered:
- Transportation charges to the company for warranty service.
- Damages resulting from abuse or improper maintenance (refer to operating instructions and precautions).
- Any other consequential damages, incidental damages, or incidental expenses, including damages to property.
Some jurisdictions do not allow limitations on incidental or consequential damages, so the above limitation or exclusion may not apply to you.
How to obtain warranty performance:
Include with the product your name, address, phone number, a description of the problem, proof of date of purchase, the company purchased from, and return to:
HM Digital, Inc.ATTN: Returns
5819 Uplander Way
Culver City, CA 90230, U.S.A.
Implied Warranties:
Any implied warranties, including implied warranties of merchantability and fitness for a particular purpose, are limited in duration to two (2) years from the date of purchase. Some jurisdictions do not allow limitations on an implied warranty length, so the above limitation may not apply to you.
To the extent any provision of this warranty is prohibited by law and cannot be preempted, it shall not be applicable. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
12.2. Contact Information
For further assistance or inquiries, please contact HM Digital, Inc. directly:
- Address: 5819 Uplander Way, Culver City, CA 90230, U.S.A.
- Telephone: 800-383-2777, 310-410-3100
- Fax: 310-410-3103
- Website: www.hmdigital.com
- Email: info@hmdigital.com
HM Digital is ISO-9001 certified. Designed in U.S.A. and Korea. Made in China.