AVATTO WT81

Contents

AVATTO WiFi Smart Thermostat User Manual

Model: WT81 / ME81AH

1. Product Overview

The AVATTO WiFi Smart Thermostat is designed for intelligent control of various heating systems, including electric floor heating, water heating, and gas boilers. It features a large LCD touch screen display, mobile app control via Tuya/Smart Life, and voice control compatibility with platforms like Google Home and Amazon Alexa. This thermostat helps maintain a comfortable and energy-efficient environment by precisely managing room temperature.

AVATTO WiFi Smart Thermostat main display
AVATTO WiFi Smart Thermostat with its clear LCD display.
Thermostat features overview with icons
Key features of the thermostat including LCD display, temperature setting, high accuracy, manual/automatic mode, data memory, weekly programmable, and app control.

2. Safety Information

  • Always turn off the main power supply before installation or maintenance.
  • Installation should be performed by a qualified electrician to prevent electric shock or damage to the device.
  • Ensure all wiring connections are secure and comply with local electrical codes.
  • Do not expose the thermostat to water or excessive humidity.

3. Package Contents

  • AVATTO WiFi Smart Thermostat Unit
  • Mounting Screws
  • External Sensor Cable (included only with Electric Floor Heating 16A model)
  • User Manual (this document)
Thermostat package contents including unit, screws, and sensor cable
Typical package contents for the AVATTO WiFi Smart Thermostat.

4. Specifications

FeatureSpecification
Brand NameAVATTO
Model NumberWT81 / ME81AH
Power Supply110-230VAC, 50~60HZ
Max. Current Load16A (Electric Floor Heating) / 3A (Water/Gas Boiler, Water Heating)
Wattage<1W (Power consumption)
Temperature SensorNTC (Built-in sensor and floor sensor)
Temperature Accuracy±1°C
Temperature Setting Range5 ~ 95°C
Ambient Temperature-5 ~ 50°C
APP ControlTuya Smart Life
Voice ControlYandex Alice, Amazon Alexa, Google Home
CertificationCE
Item Size86 x 86 x 40mm (3.4 x 3.4 x 1.6in)
Thermostat dimensions diagram
Dimensions of the AVATTO WiFi Smart Thermostat.

5. Installation and Setup

5.1. Mounting Steps

  1. Connect the power supply box according to the wiring diagram.
  2. Push the panel up and take down the panel.
  3. Install the fixed plate of the thermostat in the electrical connection box with screws.
  4. Make the panel buckle to the fixed plate and push it down.

The heating thermostat should be mounted on the wall with air flowing freely around. Avoid locations influenced by other heat sources (e.g., direct sunlight), air flow through doors and windows, or the temperature of outer walls.

5.3. Wiring Diagrams

Ensure the main power supply is OFF before performing any wiring. Refer to the specific diagram for your heating system type.

Detailed wiring diagrams for various thermostat types
Wiring diagrams for Electric Floor Heating (16A), Water/Gas Boiler (3A), and Water Heating (3A - NC Type and NO Type).
  • Power Supply: N (Neutral wire), L (Live wire). Voltage range: AC100-240V.
  • Electric Underfloor Heating (16A): Includes an external sensor in the package.
  • Water Underfloor Heating / Wall-hung Boiler (3A): Does not include an external sensor in the package. These models typically use dry contact wiring.

5.4. WiFi Connection Steps

The thermostat supports connection to a 2.4GHz WiFi network only. Ensure your router is powered on and within 5 meters of the thermostat during setup.

  1. Enter Pairing Mode: With the thermostat turned OFF, press and hold the "Up" (△) and "Down" (▽) buttons simultaneously for about 5 seconds. You will hear 3 beeps, and the thermostat will enter the distribution network interface. The WiFi icon on the display will start flashing rapidly.
  2. Install Mobile App: Scan the QR code provided in the original manual or search for "Tuya Smart" or "Smart Life" in your app store to download the application.
  3. Add Device in App: Open the Tuya Smart app, click "Add Device", then select "Small Home Appliances" and choose "Thermostat".
  4. Confirm Flashing Indicator: In the app, confirm that the indicator light on the thermostat is rapidly blinking.
  5. Enter WiFi Password: Enter your 2.4GHz WiFi network password in the app and confirm.
  6. Connection: The app will search for and connect to the device. Once connected, the WiFi icon on the thermostat will stop flashing, indicating a successful connection.
  7. Complete Setup: Click "Done" in the app to access the thermostat's control interface.
Video: AVATTO Thermostat Setup and Wiring Overview. This video demonstrates the basic setup and wiring process for the thermostat.
Thermostat controlled by mobile app
The thermostat can be controlled remotely via the mobile application.

6. Operation

6.1. User Interface and Buttons

Thermostat display elements labeled
Display elements: Week, Time, Room Temp, Setting Temp, Manual/Auto, Touch Key.
Thermostat buttons labeled
Button functions: Mode Key (M), Clock Key, Turn ON/OFF, Up Button (△), Down Button (▽).
  • Power Key: Touch to turn the system ON or OFF.
  • Mode Key (M): Select between "period control mode" (automatic) or "manual mode".
  • Up (△) / Down (▽) Keys: Touch to set the temperature and adjust system parameters. Press and hold Up and Down simultaneously for 5 seconds to activate/deactivate the child lock function.
  • Clock Key: Adjust the time and the week.

6.2. Programming (Event Time and Temperature)

In the OFF state, long press the "Mode" key (M) and the "Clock" key for 5 seconds to enter programming mode. Use the "Mode" key to cycle through parameters (hour, minute, temperature) and the Up/Down keys to adjust values.

KeyPeriodSymbolTimeTemperature
Weekday1☀️06:0020°C
2🏠08:0015°C
3🏡11:3015°C
4🏘️12:3015°C
5🌇17:0022°C
6🌙22:0015°C
Weekend1☀️08:0022°C
2🌙23:0015°C
Thermostat with weekly programming feature
The thermostat supports weekly programming with 6 time-modes daily.

6.3. Advanced Settings

To access advanced settings, turn the thermostat OFF, then press and hold the "Mode" (M) and "Down" (▽) buttons simultaneously. Use the "Mode" key to cycle through the settings and Up/Down keys to adjust values.

SymbolSettingDefault ValueAdjustment
1Temperature calibration-2Adjust measured temperature range: -9~9°C
2Sensor modeININ: built-in sensor, OU: floor sensor, AL: both sensors
3Overheating protection60°CAdjust range: 5°C~60°C
4Switching differential (Hysteresis)1°CAdjust range: 1-5°C
5Anti-frozen functionONTurn ON (01) / OFF (00)
6Kinds of periods (Time mode)01OF: Close, 01: 5+2 day mode, 02: 6+1 day mode, 03: 7+0 day mode
7Max. temperature40Adjust range: 30°C~90°C
8Set the lower limit of temperature10Adjust range: 5°C~20°C
9Reset to factory settingsPress "Up" (△) and hold for 5s to reset all parameters.

6.4. Anti-frozen Function

When the thermostat is OFF, it will automatically turn on the heating device if the room temperature drops below 5°C. It will turn off the heating device once the room temperature rises above 7°C.

6.5. Voice Control

The thermostat supports voice control through Yandex Alice, Amazon Alexa, and Google Home. After connecting the thermostat to the Tuya Smart Life app, you can authorize these voice assistants within the app to control your heating system using voice commands.

Thermostat with Amazon Alexa device for voice control
Control your thermostat hands-free using voice commands with compatible smart assistants.

6.6. Child Lock

The keypad locking function is designed to prevent children from operating the thermostat by mistake. Activate/deactivate by pressing and holding the Up (△) and Down (▽) keys simultaneously for 5 seconds.

6.7. Memory Function

The thermostat features a memory function that saves your settings even during a power failure. Data is retained when power is off.

7. Maintenance

  • Clean the thermostat's screen and body with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Ensure proper ventilation around the thermostat to maintain accurate temperature readings.
  • Regularly check wiring connections for any signs of wear or damage.

8. Troubleshooting

ProblemPossible Cause / Solution
Thermostat Crash / No Display1. Check if the power supply wiring is correct. 2. Check the power key.
LCD Display GarbledThe housing may be deformed after installation. Try reinstalling the unit.
Normal Display but No Output1. Check if the wiring between the main control unit and the power board is damaged. 2. Check for errors in the neutral wire connection on the live circuit.
Remote Control FailureCheck if the mobile app is connected to the internet and if the thermostat has a stable WiFi connection. Ensure your phone is connected to 2.4GHz WiFi.
Temperature Display ErrorAdjust the panel temperature display value via the "Temperature calibration" option in the Advanced settings tab.
Sensor Failure (Er1 / Er2)Check if the sensor is damaged or disconnected. Er1 indicates a built-in sensor issue, Er2 indicates an external sensor issue.
WiFi Disconnection / Cannot Connect to New NetworkTurn off the thermostat, then press and hold the Up (△) and Down (▽) buttons simultaneously for 5 seconds to re-enter pairing mode. Reconnect via the app. Ensure your router is 2.4GHz.

9. User Tips

  • WiFi Network: The thermostat only supports 2.4GHz WiFi. If you have a dual-band router, ensure your phone is connected to the 2.4GHz band during setup.
  • Sensor Usage: The 16A Electric Floor Heating model includes an external floor sensor. The 3A Water/Gas Boiler and Water Heating models typically use the built-in room temperature sensor and do not include an external sensor.
  • Power Outages: Your settings and programming schedules are saved even after a power loss, thanks to the memory function.
  • Hysteresis Adjustment: If you find the temperature fluctuation too wide, you can adjust the "Switching differential" (hysteresis) in the advanced settings (range 1-5°C).
  • Mounting: The thermostat is designed to fit standard wall electrical boxes.
  • Voice Control Integration: For voice control with Yandex Alice, Alexa, or Google Home, ensure you link your Tuya Smart Life account within the respective voice assistant app.
  • Remote Access: Once connected to WiFi and configured through the app, you can control your thermostat from anywhere in the world, as long as your phone has internet access.

10. Warranty and Support

10.1. Warranty

AVATTO provides a 12-month free replacement service for products purchased from them. This service is subject to the following conditions:

  • Excludes artificial damage or damage due to violent use.
  • The refunded order does not support the replacement service.
  • For quality problems, please contact AVATTO customer online service and provide relevant question videos.

10.2. Customer Support

If you encounter any issues or have questions regarding your AVATTO WiFi Smart Thermostat, please contact the AVATTO Intelligent Store customer service. Their professional support team is available to assist you in resolving problems and providing technical support.

For additional information and documents, you may refer to the User Manual (PDF).


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.