TECNR GL043 GL043E

Contents

Kinco GL043/GL043E HMI Touch Screen User Manual

Model: GL043, GL043E

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of the Kinco GL043 and GL043E Human Machine Interface (HMI) Touch Screens. These 4.3-inch displays are designed for general industrial applications, offering a reliable and cost-effective solution for human-machine interaction.

Front view of Kinco HMI Touch Screen (Green Series)
Figure 1: Front view of the Kinco GL043/GL043E HMI Touch Screen.

2. Key Features

  • Display: 4.3-inch TFT with 480*272 pixel resolution.
  • Processor: ARM RISC 32Bit 792MHz CPU.
  • Communication: COM0 (RS232/RS485/RS422), COM2 (RS232).
  • Program Download: USB Slave/U disk (both models), Ethernet (GL043E only).
  • Backlight Life: Approximately 30,000 hours.
  • Software: Compatible with Kinco DTools V3.2 and above version.
  • Certification: CE certified.

3. Model Differences

The Kinco GL043 and GL043E models are part of the Green Series and share many core features. The primary distinction lies in their connectivity options:

  • GL043: This model does not include an Ethernet port. It is designed as an upgrade or replacement for the MT4230T, maintaining the same hole size for installation.
  • GL043E: This model includes an Ethernet port, providing enhanced network connectivity. It is designed as an upgrade or replacement for the MT4230TE, also maintaining the same hole size for installation.
Comparison table of Green Series and MT4000 series HMI models
Figure 2: Comparison of Green Series HMI models with their MT4000 series equivalents.

4. Setup

4.1. Package Contents

Upon unpacking, ensure the following item is present:

  • 1 x Kinco GL043 or GL043E HMI Touch Screen

Note: Communication cables for connecting the HMI to a PLC are not included. If required, please specify your PLC's brand and model to ensure compatibility.

4.2. Software Installation

The necessary programming software, Kinco DTools V3.2 or above, is available for free. If you encounter difficulties downloading it, please contact your supplier for assistance.

4.3. Physical Installation

The HMI unit is designed for panel mounting. Refer to the mechanical dimensions and cut-out size for proper installation.

Detailed specifications and mechanical dimensions for Kinco GL043/GL043E HMI
Figure 3: Mechanical dimensions and cut-out size for panel installation.
  • Shape Size: 132mm (W) * 102mm (H) * 33mm (D)
  • Installation Hole Size: 119mm * 93mm

4.4. Wiring and Connections

Connect the HMI to its power source and other devices as follows:

  1. Power Supply: Connect a DC10V-DC28V power supply to the designated power terminals (FG, DC24V). The typical power consumption is 2W at 24V DC.
  2. Communication Ports:
    • COM0: Supports RS232, RS485, and RS422 protocols.
    • COM2: Supports RS232 protocol.
  3. Program Download Ports:
    • USB Slave: For connecting to a PC for program download.
    • U Disk: For program transfer via USB flash drive.
    • Ethernet (GL043E only): Connect an Ethernet cable for network communication and program download.
Front-bottom view of GL043/GL043E showing communication and power ports
Figure 4: Bottom view of GL043/GL043E showing communication and power ports.
Rear view of GL043E showing Ethernet, USB, and COM ports
Figure 5: Rear view of GL043E with Ethernet port.
Rear view of GL043 showing USB and COM ports (no Ethernet)
Figure 6: Rear view of GL043 without Ethernet port.

5. Operating Instructions

5.1. Power On/Off

To power on the HMI, ensure all connections are secure and apply power within the specified DC10V-DC28V range. To power off, disconnect the power supply.

5.2. Program Download

Project programs can be downloaded to the HMI using the Kinco DTools software via:

  • USB Slave: Connect the HMI to your PC using a USB cable.
  • U Disk: Transfer the program file to a USB flash drive and insert it into the HMI's U disk port.
  • Ethernet (GL043E only): Connect the HMI to your network and use the DTools software to download the program over Ethernet.

5.3. Touch Screen Interaction

The HMI features a 4-line precision resistance network touch screen. Interact with the interface by gently touching the screen with your finger or a suitable stylus.

6. Maintenance

6.1. Cleaning

To clean the HMI screen and casing, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with a mild, non-abrasive cleaner can be used. Avoid harsh chemicals, solvents, or abrasive materials that could damage the display or casing.

6.2. Environmental Conditions

Ensure the HMI operates within the specified environmental conditions to prolong its lifespan:

  • Temperature: 0-50°C
  • Humidity: 10-90% RH (non-condensing)
  • Storage Temperature: -20-60°C

Avoid exposing the unit to direct sunlight, excessive dust, moisture, or extreme temperature fluctuations.

6.3. Backlight Life

The display backlight has an estimated life of 30,000 hours. While not user-replaceable, operating the HMI within recommended brightness settings can help maximize its lifespan.

7. Troubleshooting

If you encounter issues with your HMI, consider the following basic troubleshooting steps:

  • No Power: Check the power supply connections and ensure the voltage is within the DC10V-DC28V range. Verify the power source is active.
  • Blank Screen: Ensure the HMI is powered on. If the backlight is off, it might be a setting or a hardware issue.
  • Touch Screen Unresponsive: Recalibrate the touch screen if the option is available in the system settings. Ensure the screen is clean and free from obstructions.
  • Communication Errors: Verify cable connections (RS232, RS485, RS422, Ethernet). Check communication settings in the HMI project and connected devices (e.g., PLC). Ensure the correct communication protocol is selected.
  • Program Download Failure: Check USB or Ethernet connections. Ensure the Kinco DTools software is correctly configured and the HMI is in download mode (if applicable).

For persistent issues, consult the Kinco DTools software manual or contact technical support.

8. Specifications

FeatureSpecification (GL043/GL043E)
Display Size4.3" TFT
Display Area95.04mm (W) * 53.86mm (H)
Resolution480*272 pixels
Display Color16.77 million colors
Display Angle of View70/70/50/70 (left/right/up/down)
Contrast Ratio500:1
BacklightLED
Brightness450cd/m²
Backlight Life30,000 hours
Touch Panel4 line precision resistance network (surface hardness 4H)
CPUARM RISC 32Bit 792MHz
Storage128MB NAND Flash Memory + 128MB DDR3 Memory
RTCBuilt-in real-time clock
Extensible MemoryNone
Print PortNone
EthernetGL043: None; GL043E: 10/100MHz self-adaption
Program DownloadUSB Slave/U disk/Ethernet (GL043E)
Communication PortCOM0: RS232/RS485/RS422; COM2: RS232
Input Power SupplyDC10V - DC28V
Power Waste2W @ 24V DC
Allowable Loss of Power<3ms
Insulation ResistanceOver 50MΩ @ 500V DC
Hi-Pot Test500 VAC 1 minute
Shell MaterialEngineering plastic
Shape Size132mm*102mm*33mm
Installation Hole Size119mm*93mm
Weight0.21kg
Operating Temperature0 ~ 50°C
Operating Humidity10 ~ 90% RH (non-condensing)
Storage Temperature-20 ~ 60°C
Anti-Seismic Degree10 ~ 500Hz (X, Y, Z direction 2G/30 minute)
Cooling ModeNatural air cooling
Panel Protection GradeConforming to IP65 certification (4208-93)
CE CertificationEN6100-6-4:2007, EN61000-6-2:2000
SoftwareKinco DTools V3.2 and above version

9. User Tips

No specific user tips were available from reviews or Q&A for this product.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your point of purchase or the manufacturer directly. Ensure you have your product model (GL043 or GL043E) and any relevant purchase details available when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.