1. Introduction
The MESTEK CGD05A is a highly sensitive and fast-response combustible gas leak detector designed for various applications. It features a flexible metal hose probe, a VA reverse display color screen with digital and analog dual display, and multiple alarm methods to ensure safety and accurate detection.
Key Features:
- USB Type-C rechargeable with built-in 18650/2000mAh/3.7V lithium battery.
- VA reverse display color screen for ultra-clear digital and analog dual display.
- High precision semiconductor sensors for anti-interference, high sensitivity, and fast response speed (<2s).
- Flexible metal hose (270mm) for easy handling in complex measurement environments.
- Triple alarm system: sound, vibration, and screen display.
- Measurement range: 0-50000PPM / 0-100% LEL.
- One-click conversion between PPM and %LEL measurement units.
- Automatic shutdown function (APO) and data hold.
- Temperature measurement and unit switching (°C/°F).
Detected Gases:
The CGD05A is capable of detecting a wide range of combustible gases, including but not limited to:
- Methane (CH4) / Natural Gas
- Ethanol (C2H5OH) / Alcohols
- Propane (CH3C12)
- Benzene (C6H6)
- Ethylene Oxide (C2H4O)
- Hexane (C6H14)
- Butane (C4H10)
- Ethylene (C2H4)
- Liquefied Petroleum Gas (LPG)
- Acetone (C3H6O)
- Ethane (C2H6)
- Coal Gas / Carbon Monoxide (CO)
2. Safety Information
Please read this manual carefully before using this product and keep it properly for future reference. Failure to follow instructions may lead to danger or equipment damage.
General Precautions:
- To avoid malfunctions and accidents, do not use the detector in environments with direct sunlight, high temperature, high humidity, excessive dust, strong electromagnetic fields, corrosive substances, or mechanical vibration.
- The instrument is prohibited from being used in environments containing water, acid gases, alkaline gases, or strong corrosive gases.
- Do not drop or hit the instrument.
- Do not disassemble the instrument to avoid malfunction.
- Ensure the protective net of the probe is clean; otherwise, it may affect measurement results.
3. Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, contact your dealer.
- 1 x MESTEK CGD05A Gas Detector (Host)
- 1 x USB Type-C Charging Cable
- 1 x User Manual
- 1 x Cloth Bag
- 1 x Packaging Box
4. Product Overview
4.1. Product Appearance
- Measuring probe
- Metal Hose
- Monitor (Display Screen)
- Sound switch button
- Power on/off switch button
- APO (Automatic Shutdown On-Off) button
- °C/°F (Temperature Unit Conversion) button
- PPM/%LEL (Measurement Unit Switching) button
- ZERO (Zero Function) button
- Charging port (USB Type-C)
4.2. Display Introduction
- Automatic shutdown symbol
- Battery undervoltage symbol
- ZERO reset indicator
- Analog display bar
- Digital display of gas concentration
- Measurement unit (LEL% / PPM)
- HIGH alarm prompt
- Timing symbols
- Horn (sound alarm) indicator
- Temperature display
- Temperature units (°C / °F)
5. Setup
5.1. Initial Charging
The device is equipped with a built-in 18650/2000mAh/3.7V lithium battery. Before first use, or if the battery is low, charge the device using the provided USB Type-C cable and a 5V/1A power adapter. A full charge takes approximately 4 hours.
5.2. Power On and Calibration
- Press and hold the power button (
) to power on the instrument. - The instrument will enter an automatic calibration mode with a 30-second countdown. During this time, ensure the device is in a clean, gas-free environment.
- After the countdown, the instrument will be ready for normal use.
6. Operating Instructions
6.1. Basic Operation
- Power On/Off: Press and hold the power button to turn the device on or off.
- Measurement Unit Conversion: Short press the PPM/%LEL button to switch between PPM and %LEL display units.
- Temperature Unit Conversion: Short press the °C/°F button to switch between Celsius and Fahrenheit temperature units.
- Automatic Shutdown (APO): Short press the APO button to enable or disable the automatic shutdown function (default is approximately 10 minutes).
- ZERO Reset: Short press the ZERO button to automatically clear the current gas reading after a 5-second countdown. This should be done in a clean air environment.
- Mute Function: Short press the sound switch button (
) to mute or unmute the audible alarm.
6.2. Leak Detection Procedure
- Ensure the instrument is powered on and has completed its 30-second startup calibration.
- Slowly move the flexible metal hose probe to locations where gas leaks may be present, such as around pipes, appliances, or industrial equipment. The flexible hose (270mm) allows access to hard-to-reach areas.
- Observe the digital and analog display for gas concentration readings.
- If the detected gas leakage value is above 10% LEL (or 5000 PPM), the instrument will emit a sound, vibrate, and the screen will display a "HIGH" alarm.
- The alarm will stop when the detected value decreases below 10% LEL (or 5000 PPM).
6.3. Application Scenarios
The CGD05A is suitable for a wide range of applications, including:
- Household gas prevention (e.g., water heaters, gas stoves)
- Gas pipeline leakage detection
- Oil and natural gas extraction
- Tunnel and mine operations
- Chemical engineering
- Gold treatment and refining
- Biochemical medicine
6.4. Product Demonstration Video
7. Maintenance
- Keep the instrument clean. Use a neutral detergent and a soft cloth to clean the exterior, then air dry naturally.
- Regularly inspect the probe's protective net for any blockages or damage. Twist off the protective net for cleaning if necessary.
- For long-term storage, ensure the battery is charged periodically to maintain its health. Store the instrument away from high temperatures, humidity, corrosive gases, or objects.
8. Troubleshooting
- Device not turning on or charging: Ensure the USB Type-C cable is securely connected and the power adapter is functioning. If the charging indicator (red for charging, green for full) does not behave as expected after several hours, or the device still doesn't power on, contact customer support.
- Inaccurate or slow readings: Ensure the probe's protective net is clean and unobstructed. Perform a ZERO reset in a clean air environment. If the issue persists, the sensor might be affected by environmental factors or require service.
- ZERO function not working properly: If the ZERO reset does not function correctly, ensure the device is in a clean, gas-free environment. If the problem continues, contact your dealer for assistance.
- Low battery reminder: When the battery undervoltage symbol appears on the screen, charge the device immediately to avoid affecting measurement results.
9. Specifications
| Parameter | Value |
|---|---|
| Product Name | Combustible Gas Detector (CGD05A) |
| Detect Gas | Natural gas, coal gas, liquefied petroleum gas, methane, ethanol, propane, benzene, ethylene oxide, hexane, butane, ethylene, acetone, ethane, carbon monoxide |
| Detect Traffic | 1 L/min |
| Gas Resolution | 1% LEL / 1 PPM |
| Gas Measurement Range | 0-50000 PPM / 0-100% LEL |
| Measurement Accuracy | < ±1% LEL, < ±500 PPM |
| Charging Interface | USB Type-C |
| USB Charging | 5V/1A |
| Power Supply | Built-in 18650/2000mAh/3.7V Lithium Battery |
| Charging Time | About 4 hours |
| Sampling Method | Diffusion type |
| Response Speed | 2 seconds |
| Calibration Method | Automatic calibration within 30 seconds of startup |
| Automatic Shutdown | About 10 minutes (APO function) |
| Display Screen | LCD (VA reverse display color screen) |
| Alarm Method | Sound, vibration, screen display |
| Preheating Time | 30 seconds |
| Working Current | Approximately 185mA |
| Working Temperature | 0-50°C (32-122°F) |
| Working Humidity | 0-70% RH |
| Storage Environment | -10~50°C (5%-95% RH) |
| Flexible Metal Hose Length | 270mm |
| Dimensions | 160 x 63 x 32 mm |
| Weight | About 277g (without battery) |
Note: The final interpretation of the above content belongs to our company, and the specific data is subject to actual measurement.
10. User Tips
- Initial Charge: Some users have reported receiving the device completely discharged. It is recommended to fully charge the device before its first use.
- Sensitivity and Response: While the device has a fast response time, human smell can sometimes detect very low concentrations of odorants before the device registers a significant PPM reading. For critical applications, always follow safety protocols.
- Gas Type Detection: This detector is designed for combustible gases. It can detect combustible refrigerants like R32, R290, and R600a. However, it is generally not suitable for non-combustible refrigerants (e.g., R134a, R410a, R22) or for measuring exhaust gases (like CO from engines) as its primary function, although CO is a detectable combustible gas. It does not detect oxygen (O2) or ozone (O3).
- Calibration: The device performs an automatic calibration upon startup. Ensure it is in a clean, gas-free environment during this 30-second period for accurate readings.
11. Warranty and Support
For any issues, questions, or warranty claims, please contact your seller or the manufacturer directly. Refer to the product packaging or purchase documentation for specific contact information.
A detailed user manual in PDF format is available for download: MESTEK CGD05A User Manual (PDF)