RETEKESS TD157

Contents

RETEKESS TD157 Wireless Restaurant Pagers Calling System User Manual

Model: TD157

1. Introduction

The RETEKESS TD157 Wireless Restaurant Pagers Calling System is designed to streamline customer service and reduce waiting times in various service environments. This system features a keypad transmitter and multiple coaster pagers, allowing for efficient communication between staff and customers.

RETEKESS TD157 Wireless Restaurant Pagers Calling System with charging base and pagers
RETEKESS TD157 Wireless Restaurant Pagers Calling System

Product Overview Video

2. Key Features

Key features of TD157 Pager System: Up to 998 pagers, 20 hours standby, long working distance, one button shutdown, 2 prompt modes, touch keyboard
Key features of the TD157 Pager System
  • Expandable System: Supports up to 998 pagers, allowing for large-scale operations.
  • Long Standby Time: Pagers offer up to 20 hours of standby time on a full charge.
  • Extended Working Distance: Efficient signal reception even at long distances, up to 300 meters in open areas.
  • One-Button Shutdown: Convenient power management for pagers.
  • Two Prompt Modes: Choose between Flash only or Flash + Beep modes, with adjustable prompt duration.
  • Responsive Touch Keyboard: Easy to clean and operate, resistant to spills.
  • Customizable Logo: Option for batch customized logos on pagers.

3. Specifications

3.1. Product Dimensions

Dimensions of the TD157 keyboard (238x151x30mm) and pager (106x51x11mm)
Product Dimensions: Keyboard and Pager

3.2. Technical Parameters

TD157 System Specifications
ParameterCoaster PagerKeypad Transmitter
Dimension106*51*11mm238*151*30mm
Material of HousingABSABS
Receiving Sensitivity-114dBN/A
Standby TimeApproximately 20 hoursN/A
BatteryBuilt-in 3.7V 300mAh rechargeable lithium batteryN/A
Rx Frequency433MHzN/A
Reminder MethodBuzzing & LED FlashingN/A
Distance of TransmissionAbout 300 meters in a wide-open fieldN/A
Protection LevelIP32N/A
Power SupplyN/ADC12V/1A
Transmitting PowerN/A240mW
Tx FrequencyN/A433MHz
Power AdapterN/AInput: AC 100-240V, 50/60Hz; Output: DC 12V, 1A
Keypress MethodN/ATouch type
ModulationN/AAM

4. Setup and Installation

4.1. Initial Charging

Before initial operation, place all pagers into the charging slots of the keypad transmitter. Allow them to charge for at least 20 minutes. This ensures the built-in 3.7V 300mAh rechargeable batteries are sufficiently powered for use.

Pager charging and standby time up to 20 hours
Pagers will standby for about 20 hours when fully charged.

4.2. Antenna Installation

The antenna must be securely installed on the keypad transmitter before use. Failure to do so will significantly affect the calling distance and system performance.

4.3. Power On

Place all pagers into the charging slots of the calling base. The pagers will automatically turn on once the calling base is connected to power.

5. Operation

If you modify any settings (keyboard ID, calling mode, or call duration), you will need to re-pair the calling keyboard with the pagers. Therefore, it is recommended to follow this setting sequence:

  1. Set the calling mode.
  2. Set the call duration.
  3. Pair the pagers with the call keyboard.

5.2. Power Off

To power off the pagers, place all pagers into the charging slots of the calling base, then enter 999 + CALL on the keypad. The pagers must be paired with the call keyboard to be shut down normally.

5.3. Entering Setting Mode

To enter the setting mode, short press both the CALL key and the DEL key simultaneously. The keypad screen will display F1. To exit the setting mode, short press the DEL key. The standby screen will display ---.

Within the setting mode, you can input numbers 1-4 to select different settings:

  • 1: F1 Keyboard ID number setting.
  • 2: F2 Pager ID number setting (pairing).
  • 3: F3 Calling mode setting.
  • 4: F4 Calling duration time setting.

5.4. Keyboard ID Number Setting (F1)

In setting mode, select F1 and press CALL. The screen will display the default keyboard ID. Input a new 3-digit number (001-999) on the keypad and short press CALL to save. Note: Do not set the base number to 000. Unless there is a special requirement, do not modify the keyboard ID number, as all pagers would need to be re-paired.

5.5. Pager ID Number Setting (Pairing) (F2)

First, remove all pagers from the base. Enter setting mode, the screen displays F1. Press 2 + CALL to enter pairing mode. Enter the desired 3-digit pager number (001-998) and place the pager into the charging slot. The 4 lights on the pager will flash, indicating successful pairing. Remove the pager and repeat for the next one until all pagers are set. Short press DEL to exit. Note: Do not set 999 as a pager number, as this is the power off command.

5.6. Buzzer Switch Setting (F3)

In setting mode, enter 3 + CALL. The screen will display the current buzzer mode. You can enter 000 to turn the buzzer off or 001 to turn it on. Short press CALL to save.

5.7. Calling Duration Setting (F4)

In setting mode, the screen will flash F1. Enter 4 + CALL to set the calling duration. Input a duration between 001-099 seconds on the keypad and short press CALL to save.

5.8. Long Working Distance

The TD157 system utilizes AM technology, which provides strong penetration ability, allowing signals to pass through multiple walls. The actual transmission distance is affected by the environment. Indoor working distance is approximately 100 meters (328 ft), and working distance in open areas is about 300 meters (984 ft).

Diagram showing long working distance with AM technology, penetrating walls and doors
Long Working Distance with AM Technology

5.9. Prompt Modes

The pagers offer two prompt modes: Flash only, or Flash + Beep. The prompt time is adjustable from 1 to 99 seconds, allowing customization based on your needs.

Two prompt modes: Flash and Beep+Flash, with adjustable prompt time
Adjustable Flash and Beep+Flash Prompt Modes

5.10. One Button Shutdown

Pagers can be easily turned on by placing them on the charging slot. To turn off a pager, place it on the charging slot and press 999 + CALL on the keypad.

One button shutdown feature for pagers
One Button Shutdown for Pagers

5.11. Multiple Keyboards Calling the Same Pager

The system supports multiple keyboards calling the same pager, which is useful for larger establishments or different service points.

Multiple keyboards can call the same pager
Multiple Keyboards Calling the Same Pager

6. Maintenance

6.1. Cleaning the Touch Keyboard

The touch keyboard is designed to be responsive and easy to clean. Accidental spills of oil or water will not affect its normal use. For general cleaning, wipe with a soft, damp cloth. Avoid abrasive cleaners or solvents.

6.2. Battery Care

The pagers contain built-in 3.7V 300mAh rechargeable lithium batteries. To prolong battery life, ensure pagers are fully charged before first use and when not in use for extended periods. Avoid exposing batteries to extreme temperatures.

7. Troubleshooting

  • Pager not responding or calling: Ensure the pager is properly paired with the keypad transmitter. Check the keyboard ID and pager ID settings.
  • No sound or vibration: Verify the buzzer switch setting (F3) is set to 'on' (001) and the prompt mode is configured for beep/flash.
  • Reduced transmission distance: Ensure the antenna is securely installed on the keypad transmitter. Environmental factors like thick walls or interference can also affect range.
  • Pagers not turning off: Ensure pagers are placed in the charging slot and the 999 + CALL command is correctly entered on the keypad. Pagers must be paired to be shut down normally.

8. User Tips

  • The configuration process for the TD157 system is generally straightforward and simple.
  • For visual learners or if you encounter difficulties with the manual, consider checking the official Retekess YouTube channel for instructional videos.
  • This system is highly effective in catering environments like restaurants, where customers can take a pager and wait comfortably until their order is ready, signaled by the pager.

9. Safety Guidelines

9.1. RF Energy Exposure and Product Safety

This radio uses electromagnetic energy in the radio frequency (RF) spectrum. All Retekess radios are designed, manufactured, and tested to meet government-established RF exposure levels. Improper use of RF energy can cause biological damage. Always refer to the user manual for information on RF energy exposure and how to control it to assure compliance with established limits.

9.2. Local Government Regulations

Users must be fully aware of and able to control their exposure to meet occupational requirements. Your Retekess radio has an RF Exposure Product Label. The user manual includes information and operating instructions required to control RF exposure and satisfy compliance requirements.

9.3. Radio License

Business radios operate on regulated radio frequencies. To transmit on these frequencies, you may be required to have a license. Contact your local government radio management departments for detailed classification and use of your radios. Use of this radio outside the country where it was intended to be distributed may be prohibited.

9.4. Unauthorized Modification and Adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this radio. Transmitter adjustments should only be made by or under the supervision of a technically qualified person. Replacement of any transmitter component not authorized by local government radio management departments could violate regulations.

9.5. FCC Requirements

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device. It generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications.

9.6. CE Requirements

Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at www.retekess.com.

9.7. IC Requirements

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

9.8. Protect Your Hearing

  • Use the lowest volume necessary for your job.
  • Turn up the volume only if you are in noisy surroundings.
  • Turn down the volume before adding a headset or earpiece.
  • Limit the amount of time you use headsets or earpieces at high volume.
  • When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
  • Use caution with earphones; excessive sound pressure can cause hearing loss.

Note: Exposure to loud noises for extended periods may temporarily or permanently affect hearing. The louder the volume, the less time is required before hearing damage can occur.

9.9. Avoid Burns

  • Antennas: Do not use any portable radio with a damaged antenna. Contact with a damaged antenna can cause minor burns.
  • Batteries: When conductive material (jewelry, keys, chains) touches exposed terminals, it can complete an electrical circuit and become hot, causing burns. Handle batteries with care.
  • Long Transmission: The radiator and chassis may become hot during long transmissions.

9.10. Safety Operation

  • Do not use the charger outdoors or in moist environments; use only in dry locations.
  • Do not disassemble the charger to avoid electrical shock or fire.
  • Do not operate the charger if it is broken or damaged.
  • Do not place a portable radio over an airbag or in its deployment area.
  • Unplug the charger from the AC outlet before maintenance or cleaning.
  • The adapter should be installed near the equipment and be easily accessible.
  • Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to instructions.
  • The operating temperature of the EUT cannot exceed the specified range.

9.11. Approved Accessories

This radio meets RF exposure guidelines when used with Retekess accessories supplied or designated for the product. Use of other accessories may not ensure compliance with RF exposure guidelines and may violate regulations. For a list of approved accessories, visit www.Retekess.com.

9.12. Avoid Choking Hazard

This product contains small parts. Keep out of reach of children under 3 years to avoid choking hazards.

10. Warranty and Support

10.1. Warranty Information

Most new products carry a two-year manufacturer's warranty from the date of purchase. This guarantee card should be kept by the user; no replacement if lost. For warranty service, you will need to provide a receipt proof of purchase from the actual seller for verification.

Exclusions from Warranty Coverage:

  • Damage caused by accident.
  • Misuse or abuse of the product, or unauthorized alterations or repairs.
  • If the serial number has been altered, defaced, or removed.

10.2. Contact Information

For assistance regarding repairs and service, or for any inquiries, please contact:

Henan Eshow Electronic Commerce Co., Ltd
7/F, Sanjiang Building, No.170 Nanyang Road, Huiji District, Zhengzhou, Henan, China
Web: www.retekess.com
Facebook: facebook.com/RetekessRadio
E-mail: support@retekess.com

11. Applications

The TD157 Wireless Restaurant Pagers Calling System is suitable for a variety of environments where efficient customer notification is required.

Applications banner
Applications of the TD157 Pager System
Church nursery application
Church Nursery
Fast food restaurant application
Fast Food Restaurant
Clinic application
Clinic
Coffee shop application
Coffee Shop
Food court application
Food Court
Beauty salon application
Beauty Salon

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.