Dynoracing P2015 Actuator Motor Kit

Contents

Instruction Manual

2.0 TDI Inlet Aluminium Manifold Flap V157 Actuator Motor Repair Kit

Brand: Dynoracing | Model: P2015 Actuator Motor Kit

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of the Dynoracing 2.0 TDI Inlet Aluminium Manifold Flap V157 Actuator Motor Repair Kit. This kit is designed to address the common P2015 fault code in VAG 2.0 TDI engines by providing a durable repair solution for the intake manifold flap actuator mechanism.

2. Product Overview

The repair kit is manufactured from high-quality aluminum alloy, ensuring durability and corrosion resistance. It is designed for a perfect match with the original model and is supplied as a brand new, unused component.

2.1 Kit Components

  • 1 x Repair Bracket
  • 2 x Bolts
  • 1 x Gasket
  • 1 x Spring
Kit Components: Repair bracket, bolts, gasket, and spring.
Figure 1: Contents of the repair kit.
Features: Perfect match, high quality, durable, 100% brand new.
Figure 2: Key features of the repair bracket.

3. Specifications

Attribute Value
Material Aluminum Alloy
Color Silver
Item Weight 30g
Item Length 4cm (38mm)
Item Width 2cm (12mm)
Item Height 4cm (28mm)
Placement on Vehicle Intake Manifold
Special Features Repair Bracket
Manufacturer Part Number Actuator Motor Kit
Interchange Part Number 03L129711AG
Other Part Number BX101709
OEM NO. 03L129711AG
Repair Bracket Dimensions and Important Notes.
Figure 3: Dimensions of the repair bracket.

4. Compatibility

This repair kit is specifically designed for VAG 2.0 TDI four-cylinder common rail engines manufactured between 2008 and 2014, equipped with an aluminum manifold and a V157 actuator motor (Part number 03L129711E). It is not suitable for V6 TDI or 2.0 Petrol Turbo engines.

Fitment may vary by region. Always check the manifold part number on your vehicle to ensure compatibility.

4.1 Compatible Vehicle Models

  • Volkswagen: Amarok, Beetle, CC, Eos, Golf, Jetta, Passat, Scirocco, Tiguan, Touran, Transporter.
  • Audi: A3, A4, A4 Allroad, A5, A6, Q3, Q5, TT.
  • Seat: Alhambra, Altea, Exeo, Ibiza, Leon, Toledo.
  • Skoda: Octavia, Superb, Yeti.

4.2 Associated Engine Codes

CAAB, CAGA, CAGB, CAGC, CAHA, CAHB, CBAA, CBAB, CBAC, CBBB, CBDA, CBDB, CBDC, CEGA, CJAA, CMEA.

5. Installation (Setup)

The repair bracket is designed for easy installation, typically taking less than 15 minutes with basic tools. It attaches directly to the manifold actuator motor to prevent over-rotation.

IMPORTANT: No instructions are included in the package. Professional installation is highly recommended to ensure correct fitment and function.

Repair Kit Benefits and Easy Installation.
Figure 4: Overview of the repair kit's benefits and ease of installation.
Installed Repair Bracket on Intake Manifold.
Figure 5: Example of the repair bracket installed on an intake manifold.

6. Troubleshooting

6.1 Symptoms of Fault

The P2015 fault code, along with related diagnostic trouble codes (DTCs), indicates an issue with the intake manifold flap position sensor. Common symptoms include:

  • Engine management light (MIL) illuminated on the dashboard.
  • Vehicle entering 'limp mode'.
  • Intermittent or constant Check Engine Light (CEL).
  • Specific DTCs: P2015, VAG 8213, P2002, P2009, P2017, 2968, 18447, 008213.

6.2 The Underlying Fault

The P2015 error is typically caused by the over-rotation of the actuator motor (V157) on the intake manifold. This occurs because a small plastic limiting stop within the manifold's butterfly assembly wears out, allowing the actuator to move beyond its intended range. This over-rotation triggers the fault code.

6.3 The Solution

Installing this repair bracket provides a robust, hard stop for the actuator motor, preventing it from over-rotating. This effectively cures the P2015 fault and associated symptoms for the lifespan of the vehicle. The bracket limits the motor's movement to its original, correct range, eliminating the need for costly replacement of the entire manifold or actuator motor, which are prone to the same failure.

7. User Tips

  • Preventative Measure: Many users install this bracket as a preventative measure even before the actuator motor fails, to avoid future P2015 fault codes.
  • Long-term Solution: Once installed, the bracket prevents wear in the mechanism, ensuring the trouble code does not reappear.
  • Confirmed Fit: This kit has been confirmed by users to have a good fit and compatibility with the specified Volkswagen, Audi, and Skoda models.

8. Warranty and Support

For detailed item guides and documents, including a user manual in PDF format, please refer to the following resource: User Manual (PDF).

For any further assistance or inquiries, please contact the seller directly through your purchase platform.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.