Divoom Ditoo-Pro

Contents

Divoom Ditoo-Pro Retro Pixel Art Bluetooth Portable Speaker User Manual

Spark Your Life

1. Introduction

Thank you for purchasing the Divoom Ditoo-Pro, a versatile desktop gadget designed for pixel art creation, audio playback, and daily functions. With its companion app, you can explore a vast pixel art community and enjoy high-quality audio. The Ditoo-Pro is capable of many daily functions and can be updated via software.

Please read this manual carefully before use. For any questions, contact Divoom customer support. Information in this manual is subject to change without prior notice due to the nature of technology products.

2. What's Included

Your Divoom Ditoo-Pro package should contain the following items:

  • 1 x Ditoo-Pro Speaker
  • 1 x User Manual
  • 1 x USB Type-C Charging Cable
  • Several stickers & Poster
  • 1 x Warranty Card
Divoom Ditoo-Pro speaker, gift box, USB-C charging cable, stickers, and user manual
Figure 2.1: Package Contents of Divoom Ditoo-Pro

3. Product Overview

3.1. Controls and Ports

Diagram showing the Divoom Ditoo-Pro with labels for buttons, lever, and ports
Figure 3.1: Ditoo-Pro Controls and Ports
  1. 'm' Button:
    • Press: Enter/Exit menu system
    • Hold: Turn On/Off the keyboard backlight
  2. '+' Button:
    • Press: Increase volume
    • Hold: Increase brightness
  3. '☀' Lighting Button:
    • Press: Change light function
    • Hold: Change light effects
  4. '←' Button:
    • Press: Previous song
    • Hold: Last light effect
  5. '-' Button:
    • Press: Decrease volume
    • Hold: Lower brightness
  6. '→' Button:
    • Press: Next song
    • Hold: Next light effect
  7. Lever:
    • Short pull: Play/Pause
    • Long pull: Start voice memo recording
  8. Audio Source Button:
    • Short pull: Switch between different audio sources
    • Double press: Disconnect Bluetooth connection
  9. Battery Indicator: Press any button to check the battery status.
  10. Bass Port
  11. Rear Port Flap
  12. Reset Pin Hole
  13. USB-C Charging Port
  14. ON/OFF Button: Hold to power ON/OFF speaker.
  15. TF Card Slot: For playback music from TF card.

4. Setup and Connection

4.1. Charging the Ditoo-Pro

  1. Insert the USB Type-C cable into the speaker's charging port (13).
  2. Press the power button (14) to check the battery percentage.
  3. When charging, the indicator light will illuminate. It will turn off once 100% charged.

Note: Please use a 5V-2A charger. Do not use higher voltage chargers.

Internal view of Ditoo-Pro showing battery compartment and charging port
Figure 4.1: Ditoo-Pro Internal Battery and Charging Port

4.2. Connecting the Speaker via Bluetooth

The Divoom Ditoo-Pro connects primarily via Bluetooth through the Divoom companion app.

  1. Download the Mobile Application: Search for 'Divoom' in the App Store (iOS) or Google Play Store (Android).
  2. Grant Permissions: Grant all privilege requests prompted by the app for full functionality.
  3. For Apple iOS System:
    • Connect for Music: Go to your phone's Bluetooth settings and connect to 'DitooPro-audio'.
    • Connect for Screen Control: Open the Divoom app and connect to 'DitooPro-light' within the app.
  4. For Android System: Search and connect to either 'DitooPro-light' or 'DitooPro-audio' in the Divoom app to control both music and screen.
Divoom App interface for pixel art creation
Figure 4.2: Divoom App Interface for Pixel Art

PDF Manual Reference: For detailed instructions on app usage and connection, refer to the official user manual PDF available at Divoom Ditoo-Pro User Manual (PDF).

5. Operating Instructions

5.1. Using Ditoo-Pro's Menu Functions

  1. Short press the 'm' button to enter the menu system.
  2. Use the '←' and '→' keys to switch between menu options: Music, Pixel Coloring, Tools, Alarm Clock, and Game.
  3. Pull down the lever to confirm the selected option.
  4. Short press the 'm' button to exit the current menu function.

Music Mode

  • Pull down the lever to enter the music function.
  • Press '←' and '→' keys to switch between Bluetooth or TF card mode.
  • Pull down the lever to confirm your selection.

Pixel Coloring Mode

  • Pull down the lever to start coloring.
  • Use the '+', '-', '←', '→' keys to move the icon.
  • Pull down the lever to fill the selected area.
  • Repeat until the pattern is filled, then proceed to the next pixel image coloring.
  • Press the '☀' (sun icon) key to view the complete pattern prompt.

Tool Mode

  • Pull down the lever to enter the tool menu.
  • Press '←' and '→' keys to select tools: scorer, timer, countdown, noise detection.

Alarm Clock Mode

  • Pull down the lever to enter the alarm clock settings.
  • Press the '+' and '-' keys to set the hour and minute respectively.
  • Pull down the lever to confirm and start the alarm clock.
  • To cancel an alarm: Enter the alarm clock setting interface and long press the lever to delete the set alarm clock. A crossed alarm clock icon will appear.

Note: Ditoo-Pro supports only 1 manual alarm clock. For more alarms, use the Divoom App.

Ditoo-Pro displaying time with white noise, alarm, games, and other function icons
Figure 5.1: Ditoo-Pro Displaying Time and Function Icons

5.2. 60 Seconds Voice Message Function

  1. Pull down the lever and hold it for 3 seconds.
  2. After the message pattern appears on the screen, release the lever to start recording.
  3. Pull down the lever again to end recording.
  4. Pull down the lever one more time to play the recorded message.

Note: The voice message will be automatically deleted after playback.

5.3. Playing TF Card Audio

  1. Insert a TF card into the TF card slot (15). The speaker will automatically enter TF card mode.
  2. Short press the audio source button (8) to quickly switch playback modes.
  3. To switch modes via menu: Short press the 'm' button, pull down the lever to enter the "music" menu. Use '←' and '→' keys to switch to TF card mode, and pull down the lever to enter.

Note: Only MP3/WAV/FLAC formats are supported. Maximum supported capacity is 64GB.

Hand inserting a microSD card into the Ditoo-Pro speaker
Figure 5.2: Inserting a TF Card

5.4. Direct USB-C Audio Playback

The Ditoo-Pro supports direct audio playback from a laptop via its USB-C port. Connect the Ditoo-Pro to your laptop using a USB-C cable to use it as an external speaker.

6. Maintenance and Safety

6.1. Safety Guide

Please read the following instructions carefully to ensure safe operation and longevity of your Ditoo-Pro:

  • Always follow product installation and operation instructions.
  • Place the speaker on a smooth and stable surface.
  • For best sound quality, place the speaker in an open area. Do not block its surroundings.
  • Do not push any objects into speaker vents or slots. Avoid applying great force.
  • Keep the speaker at room temperature. Do not place it near heat sources (radiators, heat registers, stoves, fireplaces, direct sunlight) or open flames.
  • Do not attempt to service the speaker yourself. Refer to qualified service personnel for repairs.
  • To avoid electrical hazards, do not expose the speaker to wet surfaces.

6.2. Battery Disposal

Dispose of used batteries properly following local regulations. Do NOT incinerate. Removal of the rechargeable lithium-ion battery in this product should only be conducted by a qualified professional.

6.3. Regulatory Compliance

Declaration of Conformity: This device meets the essential requirements of Directive 2014/53/EU.

ROHS: This product complies with Directive 2011/65/EU on the restriction of hazardous substances in electrical and electronic equipment.

FCC Rules: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

If this equipment causes harmful interference to radio or television reception, try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

7. Troubleshooting

7.1. Common Issues and Solutions

  • Bluetooth Disconnection: If Bluetooth frequently disconnects or fails to connect, ensure the device is within the 10m/33ft wireless range and there are no significant obstructions. Try double-pressing the Audio Source button (8) to disconnect and reconnect Bluetooth.
  • Device Not Turning On/Charging Issues: Ensure you are using a 5V-2A charger. If the device does not turn on or charge, try a different USB-C cable and power adapter. If the issue persists, contact customer support.
  • App Functionality: Ensure the Divoom app is updated to the latest version. Grant all necessary permissions to the app on your mobile device.
  • Sound Quality: For optimal sound, ensure the speaker is placed in an open area and not obstructed.
  • Alarm Clock Issues: Remember that the Ditoo-Pro supports only one manual alarm. For multiple alarms or advanced settings, use the Divoom app.

7.2. Contacting Support

If you encounter issues not covered here or require further assistance, please contact Divoom customer support:

8. Specifications

AttributeValue
Dimensions114.2 x 90 x 121.2 mm
Weight533g (speaker weight only)
Speaker Size48mm
Output Power15W
Frequency Response30Hz-20KHz
Signal-to-Noise Ratio≥80dB
Playback Time8 hours (tested under moderate volume)
Battery Capacity5000mAh
Battery Voltage3.6V
Battery Charge Time4 hours
Charge Input5V-2A (USB-C)
Wireless Range10m/33ft
Bluetooth Version5.0
MaterialPlastic
CertificationCE, FCC
Display Screen16x16 LED display board
Built-in MicrophoneYes
Support APPYes
Support Memory CardYes (TF Card)

9. Warranty and Support

9.1. Warranty Information

Divoom offers a limited warranty for this product. The warranty period is typically 12 months from the date of purchase (24 months if required by local law). This warranty covers defects due to faulty workmanship or materials.

To claim warranty service, you must present the sales invoice or receipt with the date and source of purchase along with the defective unit. The warranty does not cover:

  • Product failures caused by the use of non-Divoom branded accessories or peripheral devices.
  • Product failures caused by modification, unauthorized repair, or disassembly.
  • Damage caused by misuse, dropping, impact, or negligence.

The warranty is non-transferable. Any defective unit or part replaced under warranty becomes the property of the manufacturer.

For complete warranty details, please visit the Divoom official website: https://divoom.com/policies/refund-policy

9.2. Product Warranty Card

FieldDetails
Product NameDivoom Ditoo-Pro
Serial Number(To be filled by user)
Purchasing Store(To be filled by user)
Purchasing Date(To be filled by user)
Owner Name(To be filled by user)
Contact Email(To be filled by user)
Address(To be filled by user)

9.3. Divoom Contact Information

  • Official Website: www.divoom.com
  • Support Email: support@divoom.com
  • Support Contact Number: 0755-86290791
  • Repair & Return Address: 1st & 2nd floor, Building No.9, Antuoshan High-tech Industrial Park, Sha'er Community, Shajing Subdistrict, Bao An District, Shenzhen, China 518000.

10. User Tips

  • Pixel Art Customization: The Divoom app provides extensive tools for creating your own pixel art designs and animations. You can also explore and share creations within the Divoom pixel art community.
  • Sound Quality: The Ditoo-Pro delivers clear, balanced 360° sound with good bass, suitable for daily listening, gaming, and background music.
  • Battery Life: Expect 8-10 hours of music playback. If used primarily as an alarm/clock without continuous screen display, the battery can last over 24 hours.
  • App Usage: The Divoom app is free and essential for unlocking the full potential of your Ditoo-Pro, including advanced pixel art, alarm settings, and daily functions.
  • PC and Music Streaming: The Ditoo-Pro can connect to PCs via Bluetooth and supports popular music streaming services like Spotify and Apple Music when connected to your smartphone.
  • Alarm Tones: You can choose from several built-in alarm sounds or even customize your wake-up ring with your own voice memo.
  • Gift Idea: Its retro design and customizable pixel screen make it a unique and appreciated gift for gamers, creators, or anyone who enjoys distinctive desk accessories.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.