Dooya DC1288H Solar Panel

Contents

DC1288H Solar Panel User Manual

For Battery Tubular Motors (Dooya DM25LEU, DM15LEU, DM28LEU)

1. Product Overview

The DC1288H Solar Panel is designed to provide a sustainable charging solution for compatible battery tubular motors used in roller blinds, zebra blinds, and shutter curtains. It features a USB interface for easy connection to the motor.

DC1288H Solar Panel

Figure 1: DC1288H Solar Panel

Solar panel with 1.5m USB cable

Figure 2: Solar panel with 1.5m USB cable for DM25LEU, DM28LEU, DM15LEU motors.

2. Package Contents

The package includes:

  • 1 x DC1288H Solar Panel
  • 1 x USB Charging Cable (1.5m long)

3. Specifications

Technical specifications and parts overview of the solar panel, including working voltage, current, power, waterproof grade, temperature, size, and compatible motor types.

Figure 3: Overview of Solar Panel Parts, Technical Specifications, and Matchable Motor Types.

3.1 Technical Specifications

FeatureSpecification
Model NumberDC1288H solar panel
Working Voltage (Vm)5V
Open Circuit Voltage (Voc)6.3V
Short-circuit Current (Isc)659mA
Working Current (Im)606mA
Power (Pm)3W
Waterproof GradeIP55
Working Temperature-10°C to +50°C
Dimensions (L x W x H)400mm x 50mm x 2.5mm (40cm x 5cm)
Electrical Performance ToleranceVoltage ±10%, Current ±10%
Conversion Efficiency21%
OriginMainland China
Battery IncludedNo
Dimensions of the solar panel: 40cm length, 5cm width.

Figure 4: Solar Panel Dimensions.

3.2 Matchable Motor Types

This solar panel is compatible with the following Dooya battery tubular motors:

  • DM15LEU
  • DM25LEU
  • DM28LEU

4. Setup and Installation

The solar panel is designed for indoor use, typically mounted near a window to receive sufficient sunlight.

4.1 Parts Overview for Installation

  • Solar Panel: The main unit for converting sunlight into electricity.
  • Window Mounting Tape: Used to secure the solar panel to a window surface.
  • USB Charging Line: Connects the solar panel to the motor for charging.

4.2 Installation Steps

  1. Choose Location: Select a window location that receives direct sunlight for the majority of the day to maximize charging efficiency.
  2. Clean Surface: Ensure the window surface where the solar panel will be mounted is clean and dry.
  3. Attach Mounting Tape: Apply the provided window mounting tape to the back of the solar panel.
  4. Mount Solar Panel: Securely attach the solar panel to the chosen window surface.
  5. Connect to Motor: Plug the USB charging line from the solar panel into the charging port of your compatible Dooya battery tubular motor (DM15LEU, DM25LEU, or DM28LEU).
  6. Verify Connection: Ensure the USB connection is secure. The motor should begin charging when sufficient sunlight is available.

Important: Ensure the solar panel is positioned to receive maximum direct sunlight. Obstructions like curtains or shades will reduce charging effectiveness.

5. Operation

Once installed and connected, the DC1288H Solar Panel operates automatically. It converts sunlight into electrical energy to charge the connected battery tubular motor. There are no manual controls for the solar panel itself.

  • The solar panel will charge the motor's battery whenever it receives adequate sunlight.
  • Charging performance depends on sunlight intensity, duration, and the panel's orientation.

6. Maintenance

  • Cleaning: Periodically clean the surface of the solar panel with a soft, damp cloth to remove dust, dirt, or smudges that may reduce efficiency. Do not use abrasive cleaners or harsh chemicals.
  • Inspection: Regularly check the solar panel and its connections for any signs of damage or wear. Ensure the mounting tape is still securely holding the panel.
  • Environmental Conditions: While the panel has an IP55 waterproof grade, it is designed for indoor use. Avoid exposing it to extreme weather conditions or direct water immersion.

7. Troubleshooting

  • Motor Not Charging:
    • Ensure the USB cable is securely connected to both the solar panel and the motor.
    • Check if the solar panel is receiving sufficient direct sunlight. Move any obstructions (e.g., curtains, blinds).
    • Verify that the motor's battery is not fully charged.
    • Inspect the USB cable for any visible damage.
  • Reduced Charging Efficiency:
    • Clean the surface of the solar panel to remove any dirt or dust accumulation.
    • Re-evaluate the panel's placement to ensure it receives maximum sunlight exposure throughout the day.
    • Consider seasonal changes in sun angle and adjust the panel's position if necessary.

8. User Tips

  • For optimal performance, position the solar panel on a south-facing window (in the Northern Hemisphere) or north-facing window (in the Southern Hemisphere) to capture the most direct sunlight.
  • Even on cloudy days, the solar panel may still generate some power, but charging will be slower.
  • If your motor's battery is completely depleted, it might be faster to initially charge it with a wall adapter (if supported by the motor) before relying solely on the solar panel for maintenance charging.

9. Support and Further Information

For detailed information regarding the installation and operation of your Dooya battery tubular motor, please refer to the motor's specific user manual.

A PDF version of the item guide is available for download:

User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.