1. Introduction
Thank you for choosing the ANDELI WP-9F TIG Welding Torch. This manual provides essential information for the safe and effective use, setup, operation, and maintenance of your welding torch. The WP-9F is a cold welding torch designed for TIG welding machines, featuring a 4-meter flexible cable for enhanced maneuverability and excellent welding capacity.

Figure 1: ANDELI WP-9F Cold Welding Torch
Description: The main product image of the ANDELI WP-9F TIG Welding Torch, showcasing its design and flexible cable.
2. Safety Information
Always prioritize safety when operating welding equipment. Failure to follow safety precautions can result in serious injury or death.
- Wear appropriate personal protective equipment (PPE), including welding helmet, gloves, and protective clothing.
- Ensure adequate ventilation in the work area to avoid inhaling fumes.
- Keep flammable materials away from the welding area.
- Always disconnect power to the welding machine before performing any maintenance or changing torch components.
- Do not touch live electrical parts.
- Ensure proper grounding of all equipment.
- Read and understand the safety guidelines provided with your welding machine.
3. Product Overview and Components
The ANDELI WP-9F TIG Welding Torch is designed for precision welding tasks. It features a flexible torch head and a durable 4-meter cable for ease of use.
3.1 Main Components
The WP-9F torch consists of several key components that work together to deliver optimal welding performance. These include:
- Torch Body: The main housing of the torch, often with a flexible neck.
- Back Cup (Long/Short): Secures the tungsten electrode and provides a seal.
- Collet: Holds the tungsten electrode firmly in place.
- Collet Body (Stubby Gas Lens): Distributes shielding gas evenly around the tungsten electrode and provides a stable gas flow.
- Nozzle (Ceramic): Directs the shielding gas to the weld puddle.
- Flexible Cable: A 4-meter long cable connecting the torch to the welding machine, allowing for free movement.
- Connector: Connects the torch cable to the welding machine.

Figure 2: Exploded View of WP-9F Torch Components
Description: This image illustrates the individual parts of the WP-9F torch, including the long back cup, collet, collet body stubby gas lens, and nozzle, along with detailed views of the torch head, connector, and cable assembly.
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | ANDELI |
| Model Number | WP-9F |
| Type | Welding torch |
| Welding Type | TIG torch |
| Welding Capacity | Excellent |
| Cable Length | 4 meters |
| Origin | Mainland China |
| High-concerned chemical | None |
4.1 Component Dimensions
- Collet Body Stubby Gas Lens: Approximately 25cm (length) x 4cm (width).

Figure 3: Collet Body Stubby Gas Lens Dimensions
Description: An image detailing the approximate dimensions of the collet body stubby gas lens, showing a length of 25cm and a width of 4cm.
- Back Cup (Long/Short): Approximately 19cm (length) x 7cm (width).

Figure 4: Back Cup Dimensions
Description: An image illustrating the approximate dimensions of both long and short back cups, indicating a length of 19cm and a width of 7cm.
- Collet: Approximately 20cm (length) x 8cm (width).

Figure 5: Collet Dimensions
Description: An image showing the approximate dimensions of the collet, with a length of 20cm and a width of 8cm.
4.2 Package Dimensions
- Length: 28 cm
- Width: 25 cm
- Height: 5 cm
- Weight: 1.7 kg
5. Setup and Assembly
Proper assembly of the TIG torch is crucial for safe and effective welding.
5.1 Torch Component Assembly
- Insert Collet: Place the appropriate size collet into the collet body.
- Insert Tungsten Electrode: Slide the tungsten electrode through the back cup and then through the collet and collet body. Ensure the tungsten protrudes the desired length from the collet body.
- Attach Collet Body: Screw the collet body (with collet and tungsten) into the torch head.
- Attach Nozzle: Push or screw the ceramic nozzle onto the collet body.
- Secure Back Cup: Screw the back cup onto the rear of the torch head, tightening it to secure the tungsten electrode.
5.2 Connecting to Welding Machine
- Power Off: Ensure your TIG welding machine is turned off and unplugged from the power source.
- Connect Power Cable: Connect the main power cable of the WP-9F torch to the appropriate power output terminal on your TIG welding machine.
- Connect Gas Hose: Connect the gas hose from the torch to the shielding gas regulator on your gas cylinder. Ensure all connections are tight to prevent gas leaks.
- Ground Clamp: Attach the welding machine's ground clamp to the workpiece or welding table.
- Check Connections: Double-check all connections for security and proper fit before powering on the welding machine.
6. Operating Instructions
Once the torch is properly assembled and connected, you can begin welding.
- Prepare Workpiece: Clean the workpiece thoroughly to remove any contaminants.
- Set Welding Parameters: Adjust the welding current, gas flow rate, and other parameters on your TIG welding machine according to the material thickness and type.
- Gas Flow: Initiate the shielding gas flow.
- Arc Initiation: Use the torch's trigger or a foot pedal to initiate the arc. Maintain the correct arc length.
- Welding: Guide the torch along the weld joint, maintaining a consistent travel speed and angle. Add filler rod as needed.
- Post-Flow: Allow the shielding gas to continue flowing for a few seconds after extinguishing the arc to protect the cooling weld puddle and tungsten electrode.
- Flexible Head: Utilize the flexible head of the WP-9F torch to access difficult angles and positions, enhancing comfort and precision.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your WP-9F TIG welding torch.
- Inspect Consumables: Regularly check the collet, collet body, and nozzle for wear, cracks, or damage. Replace them as needed.
- Tungsten Electrode: Sharpen or replace the tungsten electrode when it becomes contaminated or dull.
- Clean Torch Head: Keep the torch head clean from spatter and debris.
- Cable Inspection: Inspect the flexible cable for any cuts, abrasions, or damage. Ensure connections are secure.
- Gas Leaks: Periodically check for gas leaks at all connections using a leak detection solution.
- Storage: Store the torch in a clean, dry place when not in use.
8. Troubleshooting
This section addresses common issues you might encounter during operation.
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor Arc Start / Unstable Arc | Contaminated or dull tungsten, incorrect gas flow, poor ground connection. | Sharpen/replace tungsten, check gas settings and connections, ensure good ground contact. |
| Excessive Tungsten Contamination | Insufficient gas flow, incorrect post-flow time, touching filler rod to tungsten. | Increase gas flow, extend post-flow, avoid touching tungsten with filler rod. |
| Porosity in Weld | Inadequate shielding gas, gas leaks, dirty workpiece. | Check gas flow and connections, clean workpiece thoroughly. |
| Torch Overheating | Exceeding duty cycle, insufficient cooling (if applicable), loose connections. | Allow torch to cool, check for proper cooling (if water-cooled), tighten connections. |
9. User Tips
- Flexible Head Advantage: The WP-9F torch head is designed to be flexible, allowing it to be bent and positioned in various angles. This feature greatly improves access to tight spaces and enhances comfort during prolonged welding sessions. Don't hesitate to adjust the head to suit your welding position.
- Consumable Management: Keep a stock of spare collets, collet bodies, and nozzles. These are wear-and-tear items and replacing them promptly will maintain weld quality and torch performance.
- Cable Management: While the 4m cable offers great freedom, ensure it's not kinked or subjected to excessive strain, which can damage internal wires or gas lines.
10. Warranty and Support
For any questions, technical assistance, or support regarding your ANDELI WP-9F TIG Welding Torch, please contact ANDELI customer service. This product is designed for ease of use and does not typically require complex installation or professional expertise beyond standard welding practices. However, if you encounter any issues or have further inquiries, our support team is ready to assist you.
Refer to the official ANDELI website or your purchase documentation for specific warranty terms and contact information.
A user manual in PDF format is also available for reference: View User Manual (PDF)