SUNSUN HXS-01, HXS-01D

Contents

SUNSUN Electric Aquarium Gravel Cleaner and Water Filter Siphon

Models: HXS-01, HXS-01D

User Manual

1. Introduction

The SUNSUN Electric Aquarium Gravel Cleaner and Water Filter Siphon is a versatile tool designed for maintaining a clean and healthy aquatic environment. This rechargeable, battery-operated unit functions as both an effective gravel cleaner and a convenient water change system. It filters water quality, improves water clarity, enhances circulation system efficiency, and provides a stable water flow environment.

The cleaner is available in two models, HXS-01 and HXS-01D, offering different power cable lengths to suit various aquarium setups.

2. Warning & Safety Information

  • CAUTION: Avoid over-tightening components to prevent damage to the accessories.
  • WARNING: Do not contact sharp objects with the unit.
  • IMPORTANT: Keep the unit dry when not in use to prevent rusting.
  • WARNING: The motor housing should not be submerged in water. Refer to the product parameters diagram for the 'DON'T INTO WATER' line.
  • CAUTION: Not recommended for use with fine sand or fine gravel, as it may affect performance or damage the unit.
  • WARNING: There is no protection on the motor; do not use it with small aquatic life like shrimps or snails, as they could be harmed.

3. Package Contents

Please check the package to ensure all items are present and undamaged:

  • Main Cleaner Unit (with motor and battery compartment)
  • Extension Tubes (adjustable length)
  • Filter Cage (red)
  • Fine Mesh Cartridges (typically two included)
  • Charger (US-style plug, 220V input, DC 12V output)
  • Small Cleaning Brush (for maintenance)
  • Gravel Cleaning Head
All components of the SUNSUN aquarium gravel cleaner laid out
Figure 3.1: All components included in the package.

4. Assembly and Setup

  1. Clean Accessories: Before initial installation, clean all accessories thoroughly with clean water.
  2. Assemble Components: Align the installation positions according to the assembly diagram. Attach the filter cage, mesh cartridge, extension tubes, and gravel cleaning head to the main unit.
  3. Secure Connections: Secure all connections with screws where applicable to ensure stability. Do not overtighten.
  4. Charge Battery: Ensure the built-in 4400mAh lithium-ion battery is fully charged before use. Connect the charger to the unit and a power outlet. The battery indicator lights will show the charging status. A full charge provides up to 2.5 hours of operation.
Close-up of the cleaner's handle showing the power button and battery indicator lights
Figure 4.1: Battery indicator and power button. Two yellow lights indicate a full charge.

5. Operating Instructions

The cleaner is designed for use in aquariums of all shapes and sizes with a minimum water depth of 8 inches (20 cm) and a maximum of 30 inches (76 cm). Ensure the water level covers the designated line on the unit, but do not submerge the motor housing.

Diagram illustrating recommended water depth for the aquarium cleaner
Figure 5.1: Recommended water depth for operation (8-30 inches).

5.2 Gravel Cleaning Mode

To clean gravel, submerge the gravel cleaning head into the aquarium water. Turn on the unit. It will gently suck water and debris through the fine mesh cartridge, trapping the debris while returning clean water to the tank. Move the cleaner slowly across the gravel bed to vacuum accumulated waste.

5.3 Water Changer Mode

To perform a water change, attach a suitable hose (tubing not included) to the designated outlet on the cleaner. Submerge the unit in the aquarium, ensuring the pump is adequately covered by water. Turn on the unit to begin siphoning water out of the tank. Monitor the water level and turn off the unit when the desired amount of water has been removed.

Diagram showing the cleaner in water changer mode with a hose and gravel cleaner mode in action
Figure 5.2: Demonstrating Water Changer and Gravel Cleaner functions.
Aquarium cleaner in use, highlighting low water level operation, plug and play, strong suction, and adjustable length
Figure 5.3: Key features of the cleaner in operation.

6. Maintenance

6.1 Cleaning the Mesh Cartridge

The cleaner features a removable and cleanable mesh cartridge. After each use, or when you notice reduced suction, the mesh cartridge should be cleaned:

  1. Turn off the unit and remove it from the aquarium.
  2. Carefully snap out the red filter cage from the main unit.
  3. Remove the fine mesh cartridge from inside the filter cage.
  4. Rinse the mesh cartridge thoroughly under running water to remove trapped debris. Use the provided cleaning brush if necessary.
  5. Reassemble the mesh cartridge into the filter cage, and then reattach the filter cage to the main unit.
Four-panel image showing how to remove and clean the mesh filter cartridge
Figure 6.1: Steps for removing and cleaning the mesh filter cartridge.

7. Troubleshooting (FAQs)

Q: Is there leakage after installation?
A: Check whether the sealing ring is intact and properly seated during assembly.
Q: Is there poor water flow?
A: Clean the filter mesh. A clogged mesh cartridge is the most common cause of reduced flow.
Q: The aquarium water becomes cloudy after cleaning.
A: This can happen if the cleaner is used with very fine debris or if the filter mesh is not fine enough for the particles. Ensure the mesh is clean and consider using a finer mesh if available for extremely fine particles. This product is not recommended for fine sand or fine gravel.

8. Specifications

Feature HXS-01 HXS-01D
Input Voltage 220V
Output Voltage DC 12V
Power 6W
Max Lift 0.7m
Max Flow 350L/h
Power Cable Length 2.4m 1.1m
Battery Capacity 4400mAh Lithium-ion
Operating Time (Full Charge) Up to 2.5 hours
Material Plastic
Diagram showing product dimensions and a table of specifications for models HXS-01 and HXS-01D
Figure 8.1: Product dimensions and detailed specifications table.

9. User Tips

  • For optimal performance, ensure the pump section of the cleaner is adequately submerged and covered by water during operation.
  • If you find the suction power to be moderate, be patient and allow the cleaner sufficient time to process the debris.
  • Regularly clean the mesh filter cartridge to maintain strong suction and efficient operation.
  • Keep the original packaging and any included inserts for future reference.

10. Warranty and Support

For any issues or inquiries regarding your SUNSUN Aquarium Gravel Cleaner, please contact the store customer service where you purchased the product.

Warranty coverage applies to non-man-made damage. Please retain your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.