1. Product Overview
The GEYA THC-15 series is a microcomputer-controlled digital time switch designed for multi-stage time period control. It allows for automatic switching of electrical equipment based on user-defined schedules. These products offer a high degree of intelligence and are easy to operate, suitable for both industrial and civilian applications.
Key Features:
- Digital time switch with weekly program.
- LCD display for clear readings.
- Up to 16 ON and 16 OFF operations, plus 18 pulse times.
- 3-year power reserve with built-in lithium battery.
- Supports ON-OFF switching times and permanent ON/OFF switching.
- Single channel control.
- High-precision, industrial-grade chips with strong anti-jamming capabilities.

Visual representation of key features including built-in battery, 16 program groups, 12/24 hour display, countdown, day/week cycle, and 18 pulse programs.
2. Setup and Installation
2.1 Physical Installation
The GEYA THC-15 Timer Switch is designed for DIN rail mounting. Ensure the device is securely clipped onto a standard DIN rail in a suitable enclosure.

Front view of the THC-15A timer switch, showing the DIN rail mounting clips.
2.2 Wiring Diagrams
Proper wiring is crucial for safe and correct operation. Refer to the diagrams below for typical wiring configurations. Always ensure power is disconnected before performing any wiring.

General Wiring Diagram: Connect 'LINE' to the live input, 'N' to neutral, and 'LOAD' to the device being controlled. Terminals 1 and 2 are for the input power (Line and Neutral). Terminals 3, 4, and 5 are for the output switch (Common, Normally Open, Normally Closed). Note: This is a special case, for reference only.

Single-phase 220V Wiring with AC Contactor: This diagram illustrates connecting the timer switch with an external AC contactor for controlling higher loads. The timer controls the contactor coil, which in turn switches the main load. Note: This is a special case, for reference only.
2.3 Initial Power-Up and Reset
After installation and wiring, apply power to the device. The LCD screen will illuminate. To activate the timer and ensure proper function, it is essential to press the RESET BUTTON.

Detailed view of the timer's LCD screen and control buttons, including the Reset button.
3. Operating Instructions
The THC-15 timer switch allows for precise control over your electrical devices. Follow these steps to set the time and program your ON/OFF cycles.

Visual guide for setting the timer.
3.1 Time Adjustment
- Press the 'P' button to enter the timing setting mode.
- Use 'H+' to adjust the hour.
- Use 'M+' to adjust the minute.
- Use 'D+' to adjust the day of the week.
3.2 How to Set ON Time
- Press the 'P' button to enter the timing setting. The display will show '1 ON' (indicating the first ON time setting).
- Press the 'H+' and 'M+' keys to set the desired ON time.
- Press 'D+' to select the day(s) of the week for this ON time.
3.3 How to Set OFF Time
- Press the 'P' button to enter the timing setting. The display will show '1 OFF' (indicating the first OFF time setting).
- Press the 'H+' and 'M+' keys to set the desired OFF time.
- Press 'D+' to select the day(s) of the week for this OFF time.
3.4 Running the Program
Repeat the above steps (3.2 and 3.3) to set all desired ON/OFF times (up to 16 pairs). After setting all programs:
- Press the 'S' button to end the time setting mode.
- Press the 'MANUAL' button until the screen displays 'AUTO' to enable automatic program execution.

Example of a day/week cycle program: Electricity turns on at 9:00 and turns off at 21:00.
4. Maintenance
The GEYA THC-15 Digital Timer Switch is designed for long-term, reliable operation with minimal maintenance.
4.1 Battery
The device features a built-in lithium battery providing a 3-year power reserve. This ensures that your programmed settings are retained even during power outages. No user maintenance is required for the internal battery.
4.2 Cleaning
To clean the device, gently wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the casing or LCD screen.
5. Troubleshooting
If you encounter issues with your GEYA THC-15 Timer Switch, try the following steps:
- Device not responding after power-up: Ensure the device is properly wired and receiving power. Press the RESET BUTTON to initialize the timer.
- Programs not executing: Check that the timer is set to 'AUTO' mode. Review your programmed ON/OFF times for any conflicts or errors.
- Incorrect time display: Re-adjust the current time using the 'P', 'H+', 'M+', and 'D+' buttons as described in Section 3.1.
- Load not switching: Verify the wiring connections to the load and ensure the load itself is functional. For higher loads, confirm the external contactor (if used) is correctly wired and operating.
- Voltage compatibility: Ensure the timer's rated voltage matches your power supply (e.g., if you need 12V, ensure you have the correct model).
6. Specifications

Detailed technical parameters and dimensions.
| Parameter | Value |
|---|---|
| Product Name | THC Weekly Programmable Time Switch |
| Model Number | THC-15 Timer Switch |
| Type | Mini, Digital |
| Voltage | ACDC12V, 24V, 110V, 220V, 240V (model dependent) |
| Rated Current | 16A, 20A, 30A (model dependent) |
| Rated Frequency | 50/60Hz |
| Display | LCD |
| Switching Contact | 1 changeover switch |
| Mounted | Din Rail |
| Minimum Control Time | 1 Minute |
| Control Time Range | 1m-168h |
| Switch Programs | 16 ON / 16 OFF |
| Timing Error | ≤ 1 seconds/day (at 25°C) |
| Power Reserve | 3 years |
| Dimensions (H x W x D) | 88mm x 36mm x 50mm |
| Certification | CE |
7. User Tips
- Always remember to press the RESET BUTTON after initial power-up or if the timer is not responding as expected.
- When ordering or installing, ensure you select the specific voltage model (e.g., 12V, 24V, 110V, 220V, 240V) that matches your application's requirements.
- Explore the time correction and other additional functions for advanced scheduling and control.
- The compact size makes it suitable for various installations, but ensure adequate ventilation.
8. Warranty and Support
GEYA products are certified to required industry standards, including CE. For any technical assistance or support, please contact your vendor or the manufacturer directly. Ensure you have your product model number and purchase details available.
GEYA Company Overview: Learn more about GEYA's commitment to quality and innovation in electrical products.
