1. Introduction
Thank you for purchasing the BOJECHER GT06 GPS tracker. This manual provides detailed instructions on how to operate the device smoothly. Please read this manual carefully before using the device. Any updates to this manual will be released with the latest product sales without prior notice. The manufacturer does not assume legal responsibility for any errors or omissions made in this manual.
2. Package Contents
The package for your GT06 GPS Tracking System includes the following items:
- GPS Tracker Device
- Microphone Wire
- Power Wire
- SOS Wire
- Open Door Alarm Wire
- Relay
- 3M Tape
- User Manual (this document)

3. Hardware Description
The GT06 GPS tracker is a compact device designed for vehicle tracking. It features multiple connection points for various functions and indicator lights for status monitoring.

Important Installation Note: When installing the device in a car, ensure it faces upwards towards the sky. If the windscreen is glued with a metal thermal insulation layer or heating layer, it may reduce the GPS signal reception and lead to GPS work disorder.

Indicator Light Status and Meaning:
| INDICATOR LIGHT STATUS | MEANING |
|---|---|
| Green light - Solid | GSM signal connection |
| Green light - Flash | NO GSM connection |
| Blue light - Solid | GPS signal connection |
| Blue light - Flash | Searching GPS signal |
| Red light - Solid | Connection external power |
| Red light - Flash | Disconnect external power |
Note: All LED lights will turn off after 10 minutes for optimal concealment.
4. Setup Instructions
4.1 SIM Card Installation
The GT06 tracker requires a GSM/GPRS SIM card to function. Ensure the SIM card is 2G compatible (or 4G/3G compatible with 2G GSM network support), can make calls, send messages, and access GPRS network. The SIM card must have sufficient credit.
- Open the rubber cover on the device.
- Insert the SIM card into the card slot in the direction shown in the illustration.

4.2 Device Wiring
The GPS tracker must be installed by professional personnel. Refer to the wiring diagram and connection details below:

- Power Connection:
- Red wire connects to vehicle power positive (+).
- Black wire connects to vehicle power negative (-).
- Green wire connects to ACC wire.
- Relay Connection (for fuel/power cut-off):
- The device's yellow wire connects to the relay's yellow wire.
- The relay's white wire connects to the car power positive (+).
- Cut off the pump wire. Connect the relay's green wire to the engine side and another green wire to the fuel pump side.
- Door Alarm Connection:
- Thin Red wire connects to the door control circuit if it is positive.
- Thin Black wire connects to the door control circuit if it is negative.
- SOS and MIC Connections:
- Connect the SOS wire to the SOS button.
- Connect the MIC wire to the microphone.
4.3 Initial Power-up and Signal Acquisition
- Connect the device to a 12V-36V power supply.
- Ensure the small switch on the device is turned to the “ON” position.
- Place the device outdoors to receive satellite signals. GPS tracking works best outdoors with a clear view of the sky. Metal or building obstructions can block GPS signals.
5. Operating Instructions
5.1 Mobile Application (APP) Tracking
The GT06 tracker supports mobile application tracking. You can download the official DAGPS app for real-time monitoring.
- Scan QR Code: Scan the QR code provided below or in the product packaging to download the application.
- Choose Platform: Open the link with a browser and choose either Android or iPhone to download the installation app.
- Install and Login: Install the DAGPS APP. For iOS users, search for 'dagps' in the App Store. Log in using the device's IMEI number as the username and '123456' as the default password.

5.2 Web Platform Tracking
You can also track your device via the web platform:
- Open your web browser and navigate to: http://www.gps110.org
- Use the tracker's IMEI number as the login username and '123456' as the default password.

5.3 SMS Commands
The device can be controlled and configured using SMS commands sent to the SIM card inserted in the tracker. The default device password is '123456'. Note the space key in the command examples.
| INSTRUCTION | Example | REPLY |
|---|---|---|
| Vibration alarm (option) | Shock123456 | shock ok |
| Intelligent mode (option) | Sleepin123456 | Sleepin ok |
| Saving Power and GPRS | upload positioning when vehicle move not upload positioning when vehicle stops | |
| Parameter | Check123456 | Device status |
| GPRS mode (default app tracking) | gprs123456 (default no need set) | gprs ok |
| Cancel GPRS (SMS tracking) | sms123456 (default no need set) | Sms ok |
| Set admin number | admin123456 mobile number | admin ok |
| Cancel admin number | noadmin123456 mobile number | noadmin ok |
| Set time zone | time zone123456 1 (default no need set) (1 is east 1, -1 is west 1) | Time zone ok |
| Set time zone (half time zone) | Time zone123456 8 30 (default no need set) (8 30 is east 8.5 time zone) | time zone ok |
| Cancel low battery alarm | Lowbattery123456 off | Low batter ok |
| ACC alarm (message inform) | acc123456 | Acc ok |
| Cancel ACC | Noacc123456 | Noacc ok |
| Cut off oil or power | Cut123456 | Stop engine |
| Cut off oil or power (if car is driving at high speed, more safer by set stop car) | (it will control stop the car when the speed is less than 20KM/H) | success |
| Stop123456 (quick control stop car) | Stop ok | |
| Resume cut off oil or power | resume123456 | Resume engine |
| Real-time tracking (default 10s) | fix030s***n123456 (default no need set) Every30s/1times positioning Can change time interval | Tnok |
APN Commands: If the device is online on the platform, you do not need to set APN commands. If the device is still not online after inserting the correct SIM card and enabling GPRS outdoors, you may need to set APN commands. You can find APN content by asking your SIM card provider or by inserting the SIM card into a mobile phone.
- SMS1:
APN123456<space>Apn name(e.g.,APN123456 ABC) - If the APN requires a username and password:
APN123456<space>APNname<space>APNuser name<space>APNpassword - To set a new IP and port (if using a different platform, not needed by default):
adminip123456<space>IP<space>port(e.g.,Adminip123456 103.110.152.62 7018) - Alternatively, using DNS:
adminip123456<space>DNS<space>port(e.g.,adminip123456 www.gps110.org 7018)
5.4 Main Functions
The GT06 GPS tracker offers a range of features for vehicle security and monitoring:
- GSM quad-band frequency support
- Real-time tracking via SMS/GPRS
- Ability to recover original password
- Overspeed alarm
- ACC anti-theft alarm
- SOS alarm
- Built-in backup battery for failure alarm notifications
- Optional vehicle oil or circuit cut-off functionality
6. Troubleshooting (FAQ)
This section addresses common issues and provides solutions:
| FAQ | Instructions/Solutions |
|---|---|
| Fail to turn it on | Please check if connected to power 9V-36V and if the red light is Solid. |
| No GSM signal | Please check if the SIM card is installed correctly and has money/credit. Ensure there is a mobile phone GSM signal. Verify the SIM card is 2G or 4G/3G Compatible with a 2G GSM network. Do not turn on PIN code and ensure no calls are diverted. |
| No GPS signal | A more open view of the sky is recommended to ensure the device receives the GPS signal normally. Place the device outdoors and walk around to acquire a signal. |
| No reply to SMS messages | Password is wrong or the format is incorrect. To restore factory settings, send SMS message: begin123456 |
| SMS position OK, but APP position not updating | Please check if APN is correctly set or if GPRS is enabled in the SIM card. |
| Platform position time doesn't update or no GPS signal | Call the device SIM card number and receive the position message. If it shows like 'Pic 2' (LBS information without GPS satellites signal), please take the GPS tracker outdoors and walk around to ensure it receives the satellite signal. Make sure the SIM card is normal. |
7. Specifications
| Content | Specs. |
|---|---|
| Dimensions (Dim.) | 95*50*13mm |
| Weight | 59g |
| Network | GSM/GPRS |
| GPS Bands | GSM 850/900/1800/1900MHz |
| GPS Sensitivity | -159dBm |
| GPS Accuracy | 5m |
| Work Voltage | 12V-36V |
| Time To First Fix (Cold status) | 45s |
| Time To First Fix (Warm status) | 35s |
| Time To First Fix (Hot status) | 1s |
| Storage Temperature | -40°C to +85°C |
| Operation Temperature | -20°C to +55°C |
| Humidity | 5%–95% non-condensing |

8. User Tips
- SIM Card Credit: Always ensure your SIM card has sufficient credit to send and receive messages, as well as for GPRS data, to maintain continuous tracking and alarm functionality.
- Data Storage: The GT06 tracker does not have internal data storage. All tracking data is transmitted via the GPRS network to the app/platform. If there is no signal, data will not be stored on the device for later upload.
- Default Login: The default password for both the mobile application and web platform is '123456'. Your device's IMEI number serves as the username.
- Battery Status: If the green indicator light flashes, then stays solid for a while, and then flashes again, it indicates a low battery. Ensure the device is connected to a 12V external battery.
9. Warranty and Support
For any technical support, warranty claims, or further inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact information.
For a comprehensive guide and additional details, please refer to the official user manual PDF available at: https://manuals.plus/m/925fca2de57fb067d2c9273a6ed189ae20a79971e0b4b23f6e211cc57f0dc082