Mooer Micro Looper Pedal Instruction Manual

1. Introduction

The MOOER Micro Looper is a compact and powerful loop recording effect pedal designed for electric guitars. It offers up to 30 minutes of recording time and unlimited overdubbing capabilities, allowing musicians to create complex soundscapes and practice with ease. Featuring true bypass circuitry, the pedal ensures your original signal remains clear and unaffected when the looper is disengaged. Its robust full metal housing and high-quality electronic components guarantee optimal performance and durability.

2. Safety Information

• Do not disassemble or repair the unit by yourself.
• Do not use or store the unit in high-temperature, high-humidity, or subzero environments.
• Do not use the unit in direct sunlight.
• Please use the specified AC adapter (9V DC, center minus plug) only.
• Do not use the unit near other electrical appliances like TVs or radios, as it may cause interference.
• Clean only with a soft, dry cloth.

3. Package Contents

Please check that your package contains the following items:

• Mooer Micro Looper Pedal
• Instruction Manual (this document)

Note: The 9V DC power adapter is not included and must be purchased separately.

4. Product Overview

The Mooer Micro Looper features a simple and intuitive design for easy operation.

Controls and Connections:

• DC IN: Power input for a standard 9V DC AC adapter (center minus plug).
• LEVEL Knob: Controls the volume of the recorded loops.
• INPUT Jack: Connect your instrument (e.g., electric guitar) here.
• OUTPUT Jack: Connect to your amplifier or next pedal in the signal chain.
• Footswitch: Multi-functional switch for recording, playback, overdubbing, stopping, undo/redo, and deleting loops.
• Status LED: Indicates the pedal's current mode (Red for recording, Blue for playback, Blinking Blue for stopped with loop in memory).

5. Setup

5.1 Power Connection

Connect a standard 9V DC AC adapter (center minus plug) to the DC IN port on the pedal. Ensure the adapter meets the power requirements (140mA current draw) to prevent damage and ensure proper operation.

5.2 Audio Connections

1. Connect your electric guitar to the INPUT jack of the Micro Looper pedal.
2. Connect the OUTPUT jack of the Micro Looper pedal to your amplifier or the input of the next effect pedal in your signal chain.

6. Operating Instructions

The Micro Looper's single footswitch controls all looping functions. The Status LED indicates the current mode:

• **Red LED:** Recording mode.
• **Blue LED:** Playback mode.
• **Blinking Blue LED:** Playback stopped, loop saved in memory.

6.1 Basic Looping Functions

1. **Start Recording:** Press the footswitch once. The Status LED will turn RED.
2. **Stop Recording & Start Playback:** Press the footswitch once again. The Status LED will turn BLUE, and your recorded loop will begin playing. This first loop determines the length of all subsequent layers.
3. **Overdubbing:** While a loop is playing (Blue LED), press the footswitch once. The Status LED will turn RED, indicating you are now recording a new layer on top of the existing loop.
4. **Stop Overdubbing & Resume Playback:** Press the footswitch once again during overdubbing. The Status LED will turn BLUE, and the loop will continue playing with the new layer.
5. **Stop Playback:** Double-press the footswitch quickly. The Status LED will blink BLUE, indicating that playback has stopped but the loop is still in memory.
6. **Resume Playback:** While the LED is blinking BLUE, press the footswitch once. Playback will resume.
7. **Undo/Redo Last Overdub:** During playback (Blue LED), press and hold the footswitch for approximately 2 seconds. This will undo the last recorded overdub. Repeat the action to redo the undone overdub.

6.2 Loop Management

1. **Delete Loop:** To delete the current loop, double-press the footswitch quickly and then hold it down on the second press. The Status LED will turn off, indicating the loop has been deleted and the pedal is in bypass mode.
2. **Loop Saving Function:** The Micro Looper automatically saves all loop recordings data when the power is turned off. You do not need to manually save your loops; they will be retained until you explicitly delete them.

6.3 Adjusting Loop Volume

Use the LEVEL knob to control the volume of the loops. Your dry signal (the sound of your instrument without effects) remains unaffected by this knob. Adjust it to balance the loop volume with your live playing, especially when performing solos.

6.4 Video Tutorial

For a visual demonstration of the Micro Looper's features and operation, please watch the official video:

7. Maintenance

• Keep the pedal clean and free from dust. Use a soft, dry cloth for cleaning.
• Avoid exposing the pedal to extreme temperatures or humidity.
• Ensure proper power supply (9V DC, center minus) to prevent damage.
• Store the pedal in a safe place when not in use to protect it from physical damage.

8. Troubleshooting

8.1 No Sound / Weak Sound

• Check all cable connections (guitar to input, output to amp).
• Ensure the power adapter is correctly connected and providing the correct voltage (9V DC, center minus).
• Verify the LEVEL knob is not set too low.
• If the LED is off, the pedal might be in bypass mode or not receiving power.

8.2 Loop Not Recording

• Ensure the pedal is in recording mode (Red LED). Press the footswitch once to initiate recording.
• Check input signal from your guitar.

8.3 Loop Not Playing Back

• Ensure the pedal is in playback mode (Blue LED) or blinking blue (stopped with loop in memory).
• If blinking blue, press the footswitch once to resume playback.

8.4 Unwanted Noise

• Use a high-quality, regulated 9V DC power supply to avoid hum or noise.
• Check for faulty cables or connections.
• Ensure proper grounding of your amplifier and other equipment.

9. Specifications

10. User Tips

• Loop Volume Balance: If your solo is getting lost in the mix, try turning down the LEVEL knob on the looper slightly to reduce the loop's volume relative to your live playing.
• Power Off Safety: Don't worry about losing your creative loops! The Micro Looper automatically saves all recorded data when the power is turned off, so your inspiration is always preserved.
• Experiment with Effects: The compact size of the Micro Looper makes it easy to integrate into any pedalboard setup. Experiment with placing other effects pedals before or after the looper to create unique and complex soundscapes.

11. Warranty & Support

For warranty information and technical support, please refer to the official MOOER website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.