1. Overview
The KKmoon SF-006 Digital Satellite Finder is a microprocessor-controlled device designed for reliable and accurate satellite signal detection. It displays signal strength graphically on an LCD screen using a thermometer-scale and numerical values (0-99). The device also provides audible pitch tones, with a higher tone indicating a stronger signal. Its high sensitivity allows it to detect weak signals, while an attenuation control function helps manage strong incoming signals from powerful satellites or large dishes for better readability.
Key Features:
- Miniature size and lightweight design for portability.
- Integrated compass for easier and quicker dish alignment.
- LCD graphic display with LED backlight for clear signal intensity readings.
- Direct connection to LNB and receiver for straightforward signal tracking.
- No external power source required; powered directly by the satellite receiver (DC13-18V).
- Buzzer and attenuation control for user-friendly operation.
2. Product Components
Familiarize yourself with the different parts of your SF-006 Digital Satellite Finder:

- LNB Connecting Port: Connects to the Low Noise Block (LNB) on your satellite dish.
- Receiver Connecting Port: Connects to your satellite receiver.
- LCD Graphic Display: Shows signal strength graphically and numerically, along with 0Hz/22KHz and 18V ON indicators.
- ATT Increasing Key: Increases attenuation to reduce signal strength for better fine-tuning.
- ATT Reducing Key: Decreases attenuation to increase signal strength.
- Light Control: Button to control the LED backlight for the LCD display.
- Buzzer Control: Button to control the audible buzzer.
- Compass: For reference during dish alignment.
- Adjusting Knob: Used for fine-tuning signal sensitivity.

3. Setup and Connection
Follow these steps to connect your SF-006 Digital Satellite Finder:
- Connect to LNB: Connect the cable from your satellite dish's LNB to the 'Satellite' (LNB Connecting Port) on the left side of the SF-006.
- Connect to Receiver: Connect a cable from your satellite receiver to the 'Receiver' (Receiver Connecting Port) on the right side of the SF-006.
- Power On: Ensure your satellite receiver is powered on. The SF-006 does not require external power and will draw power directly from the receiver (DC13-18V).

4. Operating Instructions
Once connected, you can begin tuning your satellite dish:
- Initial Signal Check: With the SF-006 connected and powered, the LCD display will show the current signal strength. If the signal is too strong (e.g., near 99%), use the 'ATT Increasing Key' or the 'Adjusting Knob' to reduce the signal level for more precise tuning. If the signal is too weak, use the 'ATT Reducing Key' or the 'Adjusting Knob' to increase sensitivity.
- Dish Alignment: Slowly adjust your satellite dish's azimuth (horizontal) and elevation (vertical) until the signal strength on the LCD display increases. The buzzer will also emit a higher pitch tone as the signal improves.
- Fine-Tuning: Once you find a peak signal, make small adjustments to maximize the signal strength. Use the attenuation control (ATT keys or Adjusting Knob) to bring the signal into a readable range (e.g., 50-70%) for the most accurate fine-tuning.
- Verify Signal: After achieving the highest possible signal strength, disconnect the SF-006 and connect the LNB cable directly to your satellite receiver. Check your receiver for picture quality and channel availability.
- Backlight and Buzzer: Use the 'Light' button to toggle the LCD backlight and the 'Buzzer' button to enable or disable the audible tone as needed.
5. Maintenance
To ensure the longevity and optimal performance of your SF-006 Digital Satellite Finder, follow these simple maintenance guidelines:
- Cleaning: Wipe the device with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the casing or screen.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Handle the device with care to avoid drops or impacts, which could damage internal components.
- Connectors: Keep the F-type connectors clean and free from debris to ensure good electrical contact.
6. Troubleshooting
If you encounter issues with your SF-006 Digital Satellite Finder, try the following:
- No Display/No Power: Ensure your satellite receiver is powered on and providing DC13-18V to the finder. Check all cable connections for tightness and proper seating.
- No Signal Reading: Verify that the LNB is correctly connected to the dish and the cable is intact. Ensure the satellite dish is generally pointed in the correct direction for your desired satellite.
- Signal Too High/Low: Use the ATT Increasing/Reducing keys or the Adjusting Knob to bring the signal into a measurable range (e.g., 50-70%) for accurate tuning.
- Buzzer Not Working: Check if the 'Buzzer Control' button has been pressed to disable the sound.
- Backlight Not Working: Check if the 'Light Control' button has been pressed to turn off the backlight.
7. Specifications
| Attribute | Value |
|---|---|
| Material | ABS |
| Impedance | 75Ω |
| Gain | ≥10dB |
| Power Supply | DC13-18V (from receiver) |
| Signal Detection | 0Hz/22KHz |
| Frequency Range | 950-2150MHz |
| Input Level Range | -40~-10dBm |
| Operating Range | 52-60dB |
| Operating Temperature | 0-40℃ |
| Item Size | Approx. 12.7 * 6.5 * 2.5cm / 5 * 2.56 * 0.98in |
| Item Weight | Approx. 92g / 3.26oz |
| Package Weight | Approx. 169g / 5.98oz |
| Package Size | Approx. 18 * 10.5 * 5.5cm / 7.09 * 4.13 * 2.16in |

8. User Tips
- Compass Use: The built-in compass is a helpful reference for initial dish positioning. However, always rely on the signal strength meter for precise alignment.
- Attenuation Control: Don't hesitate to use the ATT keys or the adjusting knob. If the signal is too strong (e.g., maxed out on the display), reducing the sensitivity will allow for more accurate fine-tuning to find the absolute peak signal.
- Signal Verification: After tuning, always verify the signal quality directly on your satellite receiver to ensure a stable and clear picture.
- Manual Language: While this manual is in English, users may find it beneficial to seek out additional resources or translations if needed for clearer understanding.
9. Warranty Information
This product comes with a 12-month Manufacturer's Limited Warranty for defective items, starting from the date of receipt. This warranty does not cover items damaged due to misuse or accidental damage after receipt. Accessories included with the product are covered by a 3-month warranty.
To claim warranty service, you must report the defect and return the item within the warranty period, ideally in its original packaging. Please provide your order number and a specific reason for the return.
10. Support
For further assistance or if you have questions not covered in this manual, please refer to the seller's support channels or contact their customer service. Always provide your product model (SF-006) and a clear description of your issue for efficient support.