Dooya DM35S

Contents

Dooya Smart Blinds Module Switch & Tubular Motor User Manual

Model: DM35S

1. Product Overview

The Dooya DM35S is a smart tubular motor designed for roller shades, blinds, and shutters. It features a 35mm diameter and a 4-wire mechanical limit system. When integrated with a Wi-Fi+RF curtain module, it allows for smart control via mobile applications, voice commands, and scheduled timers. This manual provides detailed instructions for installation, operation, and troubleshooting.

Dooya DM35S Tubular Motor

Figure 1: Dooya DM35S Standard Tubular Motor

Dooya DM35S Tubular Motor with Wi-Fi RF Curtain Module

Figure 2: Dooya DM35S Tubular Motor with Wi-Fi RF Curtain Module

2. Specifications

FeatureDescription
Model NumberDM35S
TypeRoller Shades Tubular Motor
MaterialMetal
Opening and Closing MethodUpper Open
Installation TypeExterior Installation, Side Installation, Built-in, Ceiling Installation
Applicable Window TypeALL WINDOWS
FormatElectric
OriginMainland China
Pattern TypeVertical
TechnicsFlat Plate

2.1 Motor Electrical Specifications (Example: DM45S-20)

Motor Nameplate with Specifications

Figure 3: Example Motor Nameplate (DM45S-20)

ParameterValue (DM45S-20 example)
Motor ModelDM45S-20
Rated Torque20 N.m
Rated Speed15 r/min
Rated Voltage230V
Frequency50Hz
Rated Power145W
Rated Current0.64A
Work Time4 min
Motor Weight2.05 Kg
Protection DegreeIP44
Insulation DegreeClass H
Motor TypeTubular Single Phase Asynchronous Motor

Note: Specifications may vary by specific model (e.g., DM35S vs DM45S). Always refer to the product nameplate for exact details.

2.2 Compatible Control Systems

The DM35S motor is compatible with various control systems, including:

  • Wireless Emitters: DC227, DC228, DC73A, DC74A (Emitter Frequency: 433.92MHz ± 100KHz, Work temperature: -20°C~+55°C, Transmit Distance: outdoor 200 meters, indoor 35 meters). These typically feature light-touch, dot-move, and direction-converse functions.
  • Manual Switches (Mechanic): DC59, DC25, DC27 (single manual switch).
  • Manual Switches (Electronic): DC63 (single manual switch).
  • Central Control: DC80 (4-channel central control).
  • UPS: DC51 (Uninterruptible Power Supply).

3. Safety Information

  • Ensure power is disconnected before any installation or maintenance work.
  • Do not drill through the crown or inner gear wheel of the motor.
  • Verify correct wiring connections according to the provided diagrams.
  • Do not rotate the white or red limit holes when the motor is stopped, unless performing limit adjustments.
  • Avoid overloading the motor; ensure the rated torque matches the load.
  • If the motor stops suddenly due to overheating, it will automatically resume work after approximately 20 minutes of cooling.
  • If using an external receiver, the motor is controlled by the emitter; if using an external switch, the motor is controlled by the switch.

4. Installation

4.1 Components Overview

Motor accessories including crown, drive adapter, and limit adjustment tool

Figure 4: Motor Accessories (Crown, Drive Adapter, Limit Adjustment Tool)

The installation process involves mounting the motor, connecting the drive adapter and crown, and securing the brackets.

4.2 Crown Installation

  1. Slide the crown onto the motor shaft.
  2. Ensure it is securely in place.

4.3 Drive Adapter Installation

  1. Slide the drive adapter onto the motor shaft, next to the crown.
  2. Use rivets or screws to install the drive adapter securely.

4.4 Bracket Installation

There are typically two methods for bracket installation:

4.4.1 Bracket Installation A

  • Mount the brackets to the desired surface (e.g., wall or ceiling).
  • Insert the motor assembly into the brackets.

4.4.2 Bracket Installation B

  • Mount the brackets to the desired surface.
  • Secure the motor assembly by attaching it to the brackets.

5. Wiring Instructions

Proper wiring is crucial for the safe and correct operation of the motor. Always ensure power is off before wiring.

5.1 General Wiring (Circuit Installation A & B)

The motor supports both 230V/50Hz and 120V/60Hz power supplies. Refer to the product nameplate for your specific motor's voltage and frequency.

5.1.1 230V/50Hz Wiring

  • Blue wire: Connect to Neutral (N)
  • Black wire: Connect to Direction 1 (e.g., Up)
  • Brown wire: Connect to Direction 2 (e.g., Down)
  • Green/Yellow wire: Connect to Earth (E)

5.1.2 120V/60Hz Wiring

  • White wire: Connect to Neutral (N)
  • Red wire: Connect to Direction 1 (e.g., Up)
  • Black wire: Connect to Direction 2 (e.g., Down)
  • Green wire: Connect to Earth (E)

5.2 Wiring with Wi-Fi+RF Curtain Module (Circuit Installation C)

The Wi-Fi+RF Curtain Module allows for smart control. The module typically has terminals for Line (L), Neutral (N), and motor connections (S1, S2, L, N for the motor). The module itself requires L and N power input.

Wi-Fi+RF Curtain Module with wiring terminals

Figure 5: Wi-Fi+RF Curtain Module and its terminals

5.2.1 Wiring Diagram with Curtain Switch

Connect the Earth Wire to the motor. The Line (L) and Neutral (N) from the power supply connect to the module. The module's motor outputs (L, N) connect to the motor. The switch connects to the S1 and S2 terminals of the module.

5.2.2 Wiring Diagram without Switch

Connect the Earth Wire to the motor. The Line (L) and Neutral (N) from the power supply connect to the module. The module's motor outputs (L, N) connect directly to the motor.

Important: If you use an external receiver, the motor is controlled by the emitter. If you use an external switch, the motor is controlled by the switch. Always ensure the motor stops before rotating the limit holes.

6. Operating Instructions

6.1 Limit Setting (Mechanical Limits)

The DM35S motor features mechanical limits for precise control of the blinds' travel distance. Use the special limit regulator tool for adjustments.

Limit adjustment tool

Figure 6: Special Limit Regulator Tool (part of accessories)

6.1.1 Up Limit Setting

  1. Switch on the power.
  2. Press the "Up" button on the emitter or switch once to start the motor.
  3. Use the special regulator to adjust the "+" direction and rotate the white worm to increase the upward travel distance.
  4. When the desired up limit position is reached, stop rotating the white worm and press the "Stop" button on the emitter or switch. The up limit setting is now complete.
  5. Attention: When the motor stops, do not rotate the white limit hole unless adjusting the limit.

6.1.2 Down Limit Setting

  1. Switch on the power.
  2. Press the "Down" button on the emitter or switch once to start the motor.
  3. Use the special regulator to adjust the "+" direction and rotate the red worm to increase the downward travel distance.
  4. When the desired down limit position is reached, stop rotating the red worm and press the "Stop" button on the emitter or switch. The down limit setting is now complete.
  5. Attention: When the motor stops, do not rotate the red limit hole unless adjusting the limit.

6.2 Smart Control Features (with Wi-Fi+RF Module)

When paired with the Wi-Fi+RF Curtain Module, your blinds can be controlled via a smartphone app and voice commands.

6.2.1 Smart APP Remote Control

Take full control of your roller blinds from anywhere using the "Smart Life/Tuya" app (available for iOS and Android). You can remotely check the status (open/closed) of your roller blinds.

Smartphone app controlling roller blinds

Figure 7: Smart APP Remote Control Interface

6.2.2 Hands-free Voice Control

Integrate with voice assistants like Amazon Alexa or Google Assistant for convenient hands-free operation. Simply use voice commands such as "Alexa, turn on the roller blinds shutter switch" or "Okay Google, open the blinds."

Voice control with Amazon Alexa and Google Assistant devices

Figure 8: Voice Control Integration

6.2.3 Schedules & Countdown Timer

Set schedules to automatically open or close your roller blinds according to your daily timetable. You can also use a countdown timer via your smartphone app to open/close curtains for durations from 1 minute to 6 hours.

Smartphone app showing schedule and countdown timer settings

Figure 9: Scheduling and Timer Functions

6.2.4 Family Sharing

Share control of the smart Wi-Fi curtain module with family members. The system supports one mobile phone controlling multiple devices, or multiple mobile phones controlling one device.

People sharing control of smart devices via smartphone

Figure 10: Family Sharing Feature

7. Maintenance

  • Regularly check all wiring connections to ensure they are secure and free from damage.
  • Keep the motor and control module free from dust and moisture.
  • If the motor's operation becomes noisy or erratic, inspect for any obstructions or misalignment in the blinds mechanism.
  • Do not attempt to disassemble the motor or module yourself. Contact qualified personnel for repairs.
  • If the outer tube is too long, causing the blinds to be too tight on both sides of the bracket, shorten the tube appropriately to avoid excessive tension.

8. Troubleshooting

Fail-phenomenaFailure causesSolutions / Failure Recovery
Pressing the upward button of the controller, the shutter moves downward.Inside wire connecting of the controller is wrong.Exchange the position of the black wire and brown wire.
Switch on, the drive adapter runs in one-way operation.Inside limit switch of motor doesn't open.Crown running one circle in the opposite direction of the drive adapter, then it works.
Motor starts slowly or does not work after connecting power.
  • Power voltage is low.
  • Wiring error.
  • Overload.
  • Improper installation.
  • Adjust power to rated data.
  • Check circuit and correct wiring connections.
  • Ensure rated torque is associated with the installation load.
  • Re-install the motor.
Motor stops suddenly after running.Motor stops suddenly after running (likely overheating protection).Motor will automatically resume work after 20 minutes cooling.
Abnormal sound during roller blinds operation.Outer tube is too long, leading to the blinds being too tight on both sides of the bracket.If the idler is active, properly shorten the tube to avoid a too-tight status.

9. User Tips

  • For optimal performance, ensure the motor is installed level and the blinds move freely without obstruction.
  • When setting limits, make small adjustments and test the travel distance to achieve precise positioning.
  • Regularly check for app updates for the "Smart Life/Tuya" application to ensure you have the latest features and security patches.
  • If experiencing connectivity issues with Wi-Fi, ensure your router is within range and the Wi-Fi network is 2.4 GHz, as most smart home devices operate on this frequency.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

A user manual in PDF format is available for download: Dooya Smart Blinds Motor User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.