1. Introduction
Thank you for choosing the UMI LX-2000 series voltage converter. This device is designed to safely convert electrical voltage for your appliances when traveling or using electronics from different regions.
The step-up series is specifically designed for 220-240V electrical appliances to be used in 100-120V systems (e.g., using European/Asian appliances in USA/Canada/Mexico/Japan/Taiwan).
The step-down series is applied for 100-120V electrical appliances (e.g., from USA/Canada/Mexico/Japan/Taiwan) to be used in European or Asian 220-240V systems.
The UMI voltage converter features a stylish design, a display screen for voltage input and power consumption, and includes overload protection with an alarm to ensure safe operation of your appliances.
2. Safety Precautions
Danger:
- To avoid electric shock, please DO NOT open the lid of the device.
Warning:
Pay attention to the safety of electricity and please refer to the following precautions when using this product:
- The total power of the appliances connected should not exceed the rated power of the transformer (2000W).
- The transformer is designed for indoor use only.
- The transformer case is plastic; DO NOT use it in high-temperature environments.
- Ensure proper ventilation and heat dissipation when using the transformer. DO NOT place it on any fabric materials. DO NOT block cooling holes on the two sides with any objects. Maintain at least 20mm distance from other items.
- DO NOT place the transformer in any damp or dripping position. It should be stored in a ventilated and dry place.
- DO NOT put any metal objects or debris into the transformer to avoid short-circuit or electric shock. If any metal object falls into it inadvertently, stop using the transformer immediately, unplug the power cords, and contact customer support for solutions.
- DO NOT open the bottom cover yourself. Non-professionals are not allowed to open the lid of the product.
3. Product Features and Components
The UMI LX-2000 voltage converter is equipped with several key features for ease of use and safety:

- Soft-touch power switch: Press once to turn on, press again to turn off.
- Convection Heating-sinking holes: Located on both sides, these holes ensure proper ventilation and heat dissipation during operation.
- Input three-pole power cord: Connects to the main power supply. Input voltage can be AC100-120V or AC220-240V (specific input voltage is subject to product identification).
- Bottom chuck: Helps fix the product to a smooth surface to prevent accidental knocking down.
- Wall hanging buckle hole: Allows the transformer to be mounted on a wall.
- Output socket 1:
- For AC220V input: Outputs AC110V (for North American 110-120V appliances in 220-240V systems).
- For AC100-120V input: Outputs AC220-240V (for Chinese, European, Australian appliances in other regions).
- Output socket 2:
- For AC220V input: Outputs AC100V (for Japanese 100V appliances in 220-240V systems).
- For AC100-120V input: Outputs AC220-240V (for Chinese, European, Australian, or other 220-240V electrical appliances).
- Display output power: Shows the current total power consumption in Watts (e.g., "800" for 800W). If "0" is displayed, the product is not in a working state.
- Display input voltage: Shows the current grid voltage (e.g., "220" for 220V).
4. Setup Instructions
Before connecting any appliance, ensure the voltage converter is placed on a stable, flat surface with adequate ventilation. Do not block the cooling holes.

- Plug the power cord to your socket: Connect the converter's input power cord (3) to the wall outlet of your living country.
- Turn on the switch of the converter: Press the soft-touch power switch (1) on the converter. The display will show the input voltage.
- Plug your appliance's power cord to the converter: Connect your appliance's power cord to the appropriate output socket (6 or 7) on the converter. Ensure the appliance's power consumption does not exceed 2000W.
- Turn on the switch of your appliance: Power on your appliance.
Connecting for 220V to 110V Step Down:

If your living country uses 220V (e.g., Korea, HK, Germany, France, Spain, Philippines) and you want to use a 110V appliance (e.g., from US, Canada, Mexico, Taiwan):
- Connect the converter's input power cord to a 220V wall socket.
- Plug your 110V appliance into the converter's output socket labeled 'OUTPUT: AC110V' (Output Socket 1).
Connecting for 110V to 220V Step Up:

If your living country uses 110V (e.g., US, Canada, Mexico, Taiwan) and you want to use a 220V appliance (e.g., from China, HK, Germany, France, Spain, Philippines):
- Connect the converter's input power cord to a 110V wall socket.
- Plug your 220V appliance into the converter's output socket labeled 'OUTPUT: AC220V' (Output Socket 2).
5. Operation

Powering On/Off:
Use the soft-touch power switch (1) to turn the unit on or off. Press once to power on, press again to power off.
Display Indicators:
- The display shows the current input voltage and the total output power consumption of the connected appliance(s).
- A reading of "0" for output power indicates the product is not actively converting or supplying power.
Overload Protection:

- If the total power consumption exceeds 15% of the rated power (2000W), the screen will flash once per second, and a buzzer will sound, indicating an overload. After 10 minutes of alarm, the protection system will activate, disconnecting the output circuit, and displaying "E" on the screen.
- If the total power consumption exceeds 20% of the rated power, the buzzer will alarm rapidly for 5 seconds, and the protection system will activate immediately, disconnecting the output circuit and displaying "E" on the screen.
- In case of overload protection, the transformer enters a power-off state. To reset, press the switch once to turn off the transformer, then press again to restart. Ensure the connected appliance's power is within the rated limit before restarting.
6. Maintenance
- Cleaning: First, unplug the power cord from the wall socket. Then, clean the transformer with a damp towel. Ensure no water drops into the transformer to avoid electric shock.
- Storage: Store the device in a ventilated and dry place, away from damp or dripping conditions.
7. Faults and Troubleshooting
| Phenomenon | Failure Reason | Solution |
|---|---|---|
| No display on screen, no power | Input power cord isn’t plugged in | Re-plug the power cord securely. |
| Input power cord is damaged | Contact UMI Hotline for solutions. | |
| Power switch is not turned on | Press the switch button to turn on. | |
| Display normal, but no power output | Power cord of electrical appliance isn’t plugged in | Re-plug the appliance's power cord. |
| Appliance power cord plug is damaged | Change to a functional power cord. | |
| No change of display numbers, no response from power button | Product failure | Switch off and unplug the power cord, then re-plug and switch on again. If issue persists, contact UMI Hotline. |
| Only letter “E” on screen | Overload protection activated | The total power of the appliances has exceeded the rated power of the transformer. Change to use a transformer with higher power or reduce the load. |
8. Specifications

| Attribute | Value |
|---|---|
| Model Number | LX-2000 |
| Rated Power | 2000 Watt |
| Maximum Power | 2600 Watt |
| Voltage Converting (Step Down) | Input: AC220V-240V, Output: AC100V-120V |
| Voltage Converting (Step Up) | Input: AC100V-120V, Output: AC220V-240V |
| Coil Structure | Toroidal |
| Coil Number | Autotransformer |
| Phase | SINGLE |
| Product Size | 7.28" (18.5cm) x 9.45" (24cm) x 2.75" (7cm) |
| Product Weight | 7.5kg (16.53LB) |
| Certification | CE |
| EU LVD Voltage | High voltage: Above 50Vac or 75Vdc |
| Wireless Functionality | No |
| Battery Included | No |
| High-concerned chemical | None |
9. User Tips
- Always check the power consumption of your appliance before connecting it to the converter. It is recommended to use an appliance that draws less than 80% of the converter's rated power (i.e., less than 1600W for the 2000W model) for optimal performance and longevity.
- If the converter alarms or displays 'E', immediately disconnect the appliance, reduce the load, and then reset the converter by turning it off and on again.
- For appliances with motors (e.g., blenders, vacuum cleaners), their starting wattage can be significantly higher than their running wattage. Consider a converter with a higher maximum power capacity for such devices.
- The bottom chuck is designed to fix the product on smooth surfaces. Ensure the surface is clean and dry for best adhesion.
10. Warranty and Support
This product comes with a warranty card. Please retain it for future reference.
For any issues, technical support, or warranty claims, please contact UMI Technology Co., Ltd. directly:
- Hotline: +86 757 8120 3017
- Email: umitec@outlook.com or Sucontro@hotmad.com
- Manufacturer Address: #6, Keyun Middle Road, A Zone, Shishan Industry Park, Nanhai, Foshan, Guangdong, China.
A detailed user manual in PDF format is also available for download. Please refer to the official product page or contact support for the link: User manual (PDF)