1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Dooya DM25TE and DM25LE tubular motors. These motors are designed to automate roller blinds, offering convenience and smart control. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Product Variants:
- DM25TE: A plug-in motor designed for direct power connection (110V~240V AC).
- DM25LE: A lithium battery-powered motor, offering wireless operation and requiring periodic charging.
2. Safety Information
- Ensure all electrical connections are made by a qualified professional for the DM25TE model.
- Do not expose the motors to moisture or extreme temperatures.
- Keep children and pets away from operating blinds.
- Do not operate the DM25LE motor when a low voltage alarm is indicated; charge it promptly.
- Ensure the motor is securely mounted within the roller tube before operation.
3. Package Contents
Your package should contain the following items, depending on the model purchased:
- Dooya DM25TE or DM25LE Tubular Motor
- For DM25LE: USB Charging Cable
- Instruction Manual (this document)
- Mounting accessories (brackets, screws - may vary by specific kit)
- Remote control (if purchased as a kit with remote functionality)


4. Specifications
General Specifications:
- Material: Metal
- Installation Type: Exterior Installation
- Applicable Window Type: Oriel Window
- Opening and Closing Method: Upper and Lower Biparting Open
- Pattern Type: Vertical
- Technics: Plain Dyed
- Suitable for: 38mm roller tube
- Motor Diameter Size: 25mm
- Protection Rating: IP44 (for both models)
DM25LE (Lithium Battery Motor) Specifics:
| Feature | Value |
|---|---|
| Charging Voltage/Current | DC5V/2A |
| Torque | 1.1Nm |
| Rotational Speed | 20r/min |
| Current | 0.94A |
| Power | 8W |
| Weight | 0.43kg |
| Battery Capacity | 2200mAh |

DM25TE (Plug Motor) Specifics:
| Feature | Value |
|---|---|
| Voltage | 110-240V |
| Frequency | 50/60Hz |
| Torque | 0.7Nm |
| Current | 0.08A |
| Power | 7.0W |

Package Dimensions:
- Length: 55 cm
- Width: 15 cm
- Height: 10 cm
- Weight: 1.0 kg
5. Setup and Installation
The Dooya tubular motor is designed for exterior installation within a 38mm roller tube.
Installation Steps:
- Prepare the Roller Tube: Ensure your roller blind's tube has an inner diameter suitable for a 25mm motor (typically 38mm outer diameter).
- Insert the Motor: Carefully slide the tubular motor into the roller tube. Ensure it fits snugly and is aligned correctly.
- Mount the Brackets: Securely attach the mounting brackets to your window frame or wall, ensuring they are level and spaced correctly for your roller blind.
- Attach the Blind: Mount the roller blind assembly (with the motor inside) onto the installed brackets.
- Electrical Connection (DM25TE only): For the DM25TE model, connect the motor's power cable to a suitable 110V~240V AC power supply. This step should be performed by a qualified electrician.
- Initial Charge (DM25LE only): For the DM25LE model, charge the motor for 6 hours before its first use to ensure full power. Use the provided USB charging cable.
- Pairing and Limit Setting:
- Pair the motor with your remote control (if applicable). Refer to your remote control's specific instructions for pairing.
- Set the upper and lower limit positions for your blind. This defines the maximum upward and downward travel of the blind. The motor will provide a "hint" (a brief movement) to indicate readiness for the next step in the setting process. Detailed instructions for limit setting are typically provided with the remote control or can be obtained from the seller.
6. Operation
Once installed and configured, your Dooya tubular motor can be operated using a compatible remote control.
Basic Operation:
- Up/Open: Press the 'Up' button on your remote to raise the blind.
- Down/Close: Press the 'Down' button on your remote to lower the blind.
- Stop/Pause: Press the 'Stop' or 'Middle' button to halt the blind at any desired position.
Important Notes for Operation:
- When setting limits or performing other programming functions, the valid interval for pressing emitter buttons is typically 6 seconds. If no button is pressed within this time, the controller may exit the setting mode.
- The motor will often provide a brief movement or "hint" to confirm a command or readiness for the next step during programming.
7. Maintenance
DM25LE (Lithium Battery Motor) Charging:
- Before the first use, charge the DM25LE motor for 6 hours to ensure the battery is fully charged.
- Do not operate the motor when a low voltage alarm is active. This indicates the battery needs recharging.
- Use the provided USB charging cable (DC5V/2A) to recharge the motor.
General Care:
- Keep the motor and associated components clean and free from dust.
- Avoid exposing the motor to direct water spray or excessive humidity.
- Regularly check mounting brackets and connections for security.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor not responding (DM25LE) | Low battery | Charge the motor for 6 hours. |
| Motor not responding (both models) | Remote control not paired or battery dead | Re-pair the remote control or replace remote battery. |
| Blind stops unexpectedly or doesn't reach limits | Limit positions incorrectly set | Re-set the upper and lower limit positions according to the remote control's instructions. |
| Motor makes unusual noise | Obstruction in roller tube or mechanism | Inspect the roller tube and blind mechanism for any obstructions. Ensure the motor is properly seated. |
| Motor does not move at all (DM25TE) | No power supply | Check power connection and circuit breaker. Ensure voltage is within 110-240V. |
If you encounter any issues not listed here or if the problem persists, please contact customer support for assistance.
9. User Tips
- First Use Charging: For DM25LE battery motors, always perform a full 6-hour charge before the very first operation to maximize battery life and performance.
- Limit Setting Precision: Take your time when setting the upper and lower limits. Accurate limit settings ensure smooth and consistent operation of your blinds. If unsure, consult the remote control manual or seller's video instructions.
- Remote Control Response: Be aware of the 6-second response window for remote control commands during programming. This helps prevent accidental changes.
- Compatibility Check: Double-check that your roller blind tube is compatible with a 25mm motor (typically 38mm outer diameter) before purchasing and installing.
10. Warranty and Support
This product is a customized item. Returns are generally not accepted if there is no quality problem.
Damaged or Incorrect Items:
- If the product sustains any damage during transportation, please contact us immediately. Provide pictures of the damaged parts and details of the size. We will arrange for new products or replacement parts to be sent.
- If you receive the wrong color or an incorrect product, please contact us and provide pictures to demonstrate the issue. We will arrange for the correct fabric or product to be sent as a replacement.
For any problems or concerns, please contact the SUNFREE Sunfree Official Store directly before leaving feedback. We are committed to resolving any issues and providing excellent after-sale service.