HS 18301/18311/18302/18321

Contents

HS 18301/18311/18302/18321 RC Car Spare Parts Instruction Manual

This manual provides detailed information for the installation, maintenance, and troubleshooting of various spare parts for HS 18301, 18311, 18302, and 18321 series RC cars.

1. Product Overview and Parts List

This section provides a visual guide and list of the available spare parts for your HS RC car models. Please refer to these diagrams when identifying or replacing components.

Overall diagram of RC car spare parts for models 18301, 18311, 18302, 18321.

Figure 1: Overall diagram of RC car spare parts for models 18301, 18311, 18302, 18321.

Detailed Parts Diagrams:

Diagram showing chassis, motor cover, electronics cover, battery cover, front/rear bumpers, and shock absorber supports.

Figure 2: Chassis, Motor Cover, Electronics Cover, Battery Cover, Front/Rear Bumpers, and Shock Absorber Supports.

Diagram showing wheel drive rods, steering assembly, servo assembly, servo link rod, suspension swing arm, front/rear hubs, L-wheel hex adapters, and shock absorbers.

Figure 3: Drive Rods, Steering, Suspension, Shock Absorbers, and Related Components.

Diagram showing front/rear gearbox, differential, bevel gears, wheel hubs, tires, and various car shells (roll cage and pickup truck styles).

Figure 4: Gearbox, Differential, Gears, Wheels, Tires, and Car Shells.

Diagram showing lithium battery, USB charging cable, servo, motor with wires, and receiver board.

Figure 5: Electronic Components including Battery, Charging Cable, Servo, Motor, and Receiver Board.

Diagram showing car shell pins, central drive shaft (aluminum alloy), suspension swing arm steel shaft, wheel washers, bearings, and ball head screws.

Figure 6: Small Components including Shell Pins, Drive Shaft, Swing Arm Shaft, Washers, Bearings, and Screws.

Image of a chassis guard and motor guard labeled 18301-2.

Figure 7: Chassis Guard and Motor Guard (Part 18301-2).

Component List:

  1. Chassis
  2. Chassis and Motor Cover
  3. Electronics Cover
  4. Car Battery Cover
  5. Front and Rear Armor/Bumper
  6. Front and Rear Shock Absorber Support
  7. Front and Rear Car Shell Support
  8. Left and Right Steering Link Rod
  9. Front and Rear Upper Link Rod
  10. Wheel Drive Rod
  11. Steering Assembly
  12. Servo Assembly
  13. Servo Link Rod
  14. Suspension Swing Arm
  15. Front Left/Right Hub/Knuckle
  16. Rear Left/Right Hub/Knuckle
  17. L-Wheel Hex Adapter
  18. Shock Absorber and Shock Cap
  19. Front Rear Gearbox
  20. Front Rear Differential
  21. Front and Rear Bevel Gear
  22. Wheel Hub
  23. Tire
  24. Wheel
  25. Roll Cage Car Shell (Red) / Pickup Truck Car Shell (Red)
  26. Roll Cage Car Shell (Blue) / Pickup Truck Car Shell (Blue)
  27. Lithium Battery
  28. USB Charging Cable
  29. Servo
  30. Motor and Wires
  31. Receiver Board
  32. Car Shell Pin
  33. Central Drive Shaft (Aluminum Alloy)
  34. Suspension Swing Arm Steel Shaft
  35. Wheel Washer
  36. Bearing
  37. Ball Head Screw

2. Setup and Installation

When replacing or installing new parts, always ensure your RC car is powered off and the battery is disconnected. Use appropriate tools and follow the original assembly sequence in reverse for disassembly, and forward for reassembly.

Important Note on Receiver Board and Remote Control Compatibility:

The receiver board and remote control for these models have both new and old versions. These versions are NOT interchangeable. Ensure you are using a new version receiver board with a new version remote control, or an old version with an old version. Currently, only the new version receiver board and remote control are supplied.

Close-up of the new version receiver board, showing components and wiring.

Figure 8: New Version Receiver Board - Detailed View.

Close-up of the new version receiver board, highlighting a specific component with a red circle.

Figure 9: New Version Receiver Board - Highlighted Component.

Close-up of the new version receiver board, showing the 'New version' label and a red arrow pointing to a component.

Figure 10: New Version Receiver Board - Identification Markings.

When installing the receiver board, ensure all connections (motor, servo, battery) are correctly oriented and securely plugged in. Refer to the diagrams for proper component placement and wiring.

3. Operating Principles of Components

Each spare part plays a crucial role in the overall function of your RC car:

  • Motor: Provides the power for the car's propulsion. Ensure it is securely mounted and connected to the receiver board.
  • Receiver Board: Acts as the central control unit, receiving signals from the remote control and translating them into actions for the motor and servos.
  • Servos: Responsible for steering the car. They convert electrical signals into precise mechanical movements.
  • Chassis: The main frame of the car, providing structural integrity and mounting points for all other components.
  • Shock Absorbers & Suspension: Absorb impacts and maintain tire contact with the ground, crucial for handling and stability.
  • Gears & Drive Rods: Transmit power from the motor to the wheels, allowing the car to move.
  • Car Shell: Protects internal components from damage and contributes to the car's aesthetic.

4. Maintenance

Regular maintenance extends the lifespan of your RC car parts and ensures optimal performance:

  • Cleaning: After each use, especially in dusty or dirty conditions, clean the chassis, wheels, and suspension components. Use a soft brush or compressed air to remove debris.
  • Inspection: Periodically check for loose screws, worn gears, damaged wires, or cracked plastic parts. Replace any damaged components promptly.
  • Lubrication: Apply appropriate RC-specific lubricants to moving parts like gears and bearings to reduce friction and wear.
  • Battery Care: Follow the manufacturer's guidelines for charging and storing lithium batteries to ensure safety and longevity.

5. Troubleshooting

If you encounter issues with your RC car after replacing parts, consider the following:

  • No Power/Response:
    • Check battery charge and connections.
    • Verify receiver board and remote control compatibility (new vs. old versions).
    • Ensure all wires to the motor and servos are securely connected to the receiver board.
  • Steering Issues:
    • Inspect servo connections and functionality.
    • Check steering linkages for obstructions or damage.
    • Ensure the steering assembly is correctly installed.
  • Motor Not Functioning:
    • Check motor wiring and connections to the receiver board.
    • Inspect gears for damage or obstructions.
  • Missing or Loose Parts: If components like bearings or small rods are missing or not properly secured, it can affect performance. Double-check all small parts during assembly.

6. Specifications

Attribute Detail
Model Numbers 18301, 18311, 18302, 18321
For Vehicle Type Cars
Tool Supplies Category Assembled class
Four-wheel Drive Attributes Shell/Chassis/Wing/Head
Remote Control Peripherals/Devices Motor
Upgrade Parts/Accessories Car Shell
RC Parts & Accs RECEIVERS
Material Composite Material
Origin Mainland China
Recommended Age 14+ years
Use Vehicles & Remote Control Toys
Is Electric No Battery (for individual parts)
Battery/Power Supply Included No (for individual parts)
Charger/Adapter Included No (for individual parts)
Package Dimensions (approx.) Length: 20cm, Width: 10cm, Height: 10cm
Package Weight (approx.) 0.5 kg

7. Warranty and Support

Your satisfaction is important to us. Please review the following information regarding returns, replacements, and support.

Returns and Replacements:

  • Free Returns: Free returns are available within 90 days of receipt.
  • Defective Items: If an item is defective, please inform us within 30 days of receipt for a replacement. No refunds are offered for defective items; a new one will be provided. Buyers are responsible for return shipping costs, and we will cover the cost for resending the replacement.
  • General Returns: You have 7 days to contact us and 60 days to return an item from the date it was received. If the item is in your possession for more than 7 days, it is considered used, and a refund or replacement will not be issued. All returned items must be in their original packaging, and you must provide a shipping tracking number, specific reason for return, and your purchase order number.
  • Refunds: A full refund of your winning bid amount will be issued upon receipt of the item in its original condition and packaging with all components and accessories, after both buyer and seller cancel the transaction.
  • Shipping Costs for Returns: Shipping costs for returns are generally borne by the buyer, unless the product is not as advertised, in which case we will bear all shipping costs.

Delivery Guarantee:

  • Receive a $1.00 coupon code if delivery is delayed.
  • Full refund if the package is lost.
  • Full refund if items are damaged upon arrival.
  • Full refund if no delivery within 30 days.

Sustainability and Privacy:

  • We encourage sustainable shopping practices.
  • Your security and privacy are protected. Personal details are not shared with third parties without consent and are kept safe and secure.

8. User Tips

Leverage these tips from other users to enhance your RC car experience:

  • Component Quality: Opt for quality spare parts to ensure enhanced motor control and overall vehicle performance. Composite materials offer a good balance of durability and weight for many components.
  • Understand Part Function: Before replacing any part, familiarize yourself with its specific function (e.g., shell for protection, chassis for structure, wing for aerodynamics, head for aesthetics) to ensure correct installation and optimal performance.
  • Compatibility Checks: Always double-check the compatibility of electronic components, especially receiver boards and transmitters, as different versions may not work together.
  • Material Considerations: When selecting parts like suspension arms, links, or drive shafts, consider the material (metal vs. plastic) based on your usage and desired durability. Metal parts often provide greater strength but can add weight.
  • Small Parts Attention: Pay close attention to small components like bearings and pins during assembly. Ensure they are all present and correctly installed to avoid operational issues.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.