Introduction
Thank you for choosing the SUNSUN Aquarium Filter. This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your new aquarium filter. Please read this manual thoroughly before use and keep it for future reference.
The SUNSUN Aquarium Filter is designed for multiple filtration stages, ensuring efficient water purification for your aquarium. It features a transparent filter bucket, allowing you to easily monitor the filter media. The inlet switch valve design also functions as a flow regulating valve.
Package Contents
Please check the contents of your package against the list below. Components may vary depending on the specific model purchased (with or without power pump).
For EW-604 / HW-604 (Without pumps and other accessories):
- 1 x Fish Tank Filter
- 2 x Flow Valve
For EW-604B / HW604B (With pumps and other accessories):
- 1 x Fish Tank Filter
- 2 x Flow Valve
- 2 x Water Pipe (hoses)
- 3 x Inlet and Outlet Pipe Fittings
- 1 x Water outlet
- 1 x Suction cup

Specifications
| Feature | Specification |
|---|---|
| Product Name | Fish Tank Filter |
| Model | C06330 (EW-604, HW-604, EW-604B, HW-604B) |
| Material | Plastic |
| Voltage | 220-240V / 50Hz |
| Power (EW-604B/HW604B) | 14W |
| Lift (EW-604B/HW604B) | 1.5m |
| Flow Rate (EW-604B/HW604B) | 800L/h |
| Applicable Fish Tank Size | 150 Liter - 300 Liter (or 80cm length fish tank) |
| Filter Dimensions (Approx.) | 195mm (Diameter) x 365mm (Height) |
| Hose Length | 1.5m * 2 (for models with power) |



Setup Instructions
Follow these steps for proper installation of your SUNSUN Aquarium Filter:
Prepare the Filter Unit: Place the filter canister on a stable surface next to or below your aquarium. Ensure it is lower than the water level in the tank for proper siphoning and flow.

Transparent filter barrel for easy monitoring. Install Filter Media: Open the filter lid and arrange the filter sponges (blue, yellow, black, white) in the designated trays. Ensure they are stacked correctly for multi-stage filtration.

Multi-layered filter sponges. Assemble Inlet and Outlet Pipes: Connect the inlet and outlet pipe fittings and water pipes (hoses) as shown in the diagram. Secure them with the provided suction cups to the inside of your aquarium.

Inlet and outlet pipe assembly with measurements. Connect Hoses to Filter: Attach the water pipes (hoses) from the aquarium to the corresponding inlet and outlet ports on the filter unit. Ensure all connections are tight to prevent leaks.
Position the Pump (for B models): If you have a model with a power pump (EW-604B/HW604B), attach it to the filter unit as shown in the product images. Ensure it is securely connected.

External pump unit for the filter. Prime the Filter: Before plugging in the pump (for B models) or starting the siphon (for non-B models), fill the filter canister with water from your aquarium. This helps to remove air and initiate flow.
Final Connection: Once the filter is primed and all connections are secure, plug in the power cord (for B models) or ensure the siphon is established (for non-B models). The filter should begin operating.

Installation diagram showing water flow and connections.
Operating Instructions
Once installed, operating your SUNSUN filter is straightforward:
- Power On/Off: For models with a pump (EW-604B/HW604B), simply plug the unit into a suitable 220-240V, 50Hz power outlet to start operation. Unplug to turn off.
- Flow Adjustment: The inlet switch valve can be used to regulate the water flow rate. Adjust the lever on the valve to increase or decrease the flow as needed for your aquarium.
- Monitoring: The transparent filter bucket allows for visual inspection of the filter media. Regularly check the media for clogging or excessive debris buildup.

Maintenance
Regular maintenance is crucial for optimal filter performance and water quality:
- Cleaning Filter Media: Periodically clean or replace the filter sponges. The frequency depends on your aquarium's bioload. For general maintenance, rinse the sponges in old aquarium water (not tap water) to preserve beneficial bacteria.
- Transparent Bucket: The transparent design allows you to see when the media is dirty. When the water flow visibly decreases or the media appears heavily soiled, it's time for cleaning.
- Hose and Pipe Cleaning: Over time, algae and debris can build up in the hoses and pipes, reducing flow. Clean these components as needed using a flexible brush.
- Pump Maintenance (for B models): Disassemble and clean the pump impeller and housing regularly to prevent blockages and maintain efficiency.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Reduced water flow | Clogged filter media, dirty hoses, air in system, pump issue (B models) | Clean filter media and hoses. Re-prime the filter to remove air. Check pump impeller for blockages. |
| Filter not starting (B models) | Not plugged in, power outage, pump malfunction | Ensure power cord is securely plugged in. Check power supply. Inspect pump for damage or blockages. |
| Leaking | Loose connections, damaged O-rings/seals | Check all hose connections and tighten. Inspect rubber seals and O-rings for wear or damage and replace if necessary. |
| Unusual noise (B models) | Air in system, foreign object in pump, worn impeller | Re-prime the filter to remove air. Clean pump impeller and housing. Replace impeller if worn. |
User Tips
- This filter system is highly effective for maintaining clear water and a healthy environment for your fish.
- Users have reported excellent performance for aquariums up to 200-250 liters, with some noting good water quality and no odor for up to 4 weeks between maintenance.
- Utilize the flow adjustment lever on the filter to customize the water circulation to suit your aquarium's specific needs and inhabitants.
Frequently Asked Questions (FAQ)
- Q: What is the suitable tank size for this filter?
- A: The filter is designed for aquariums ranging from 150 to 300 liters, or tanks approximately 80cm in length. Users have confirmed its effectiveness for 200-250 liter tanks.
- Q: Can I adjust the water flow?
- A: Yes, the filter includes an inlet switch valve with a lever that allows you to regulate the power and flow of the water.
- Q: What is the voltage requirement for the powered models?
- A: The powered models (EW-604B/HW604B) operate on 220-240V at 50Hz.
Warranty and Support
For any issues or questions regarding your SUNSUN Aquarium Filter, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for any warranty claims.