HLTNC S-350W

Contents

HLTNC 350W Switching Power Supply

Model: S-350W Series User Manual

1. Introduction

This switching power supply is a high-efficiency, stable power conversion device designed to convert alternating current (AC) into direct current (DC) for industrial and commercial electronic equipment. Adopting advanced PWM (Pulse Width Modulation) technology, it features compact structure, low power consumption, and reliable performance. The built-in multiple protection functions ensure safe operation of both the power supply and connected devices, making it suitable for various harsh industrial environments and precision electronic systems.

Key Features

  • Universal input voltage: Compatible with AC 100~240V, suitable for global use.
  • High efficiency & energy saving: ≥85% conversion efficiency reduces power loss and heat generation.
  • Stable output: ±1% voltage regulation ensures consistent power supply for sensitive equipment.
  • Comprehensive protection: Overload, overvoltage, short circuit, and over-temperature protection prevent damage to the power supply and load.
  • Durable construction: Cold-rolled steel/aluminum alloy housing with good heat dissipation and anti-interference performance.
  • Flexible installation: Wall-mounted, DIN rail-mounted, or desktop installation options (depends on model).
  • Low noise: Fan-cooled models adopt silent fans; natural convection models operate with no noise.

Video: HLTNC Switching Power Supply product showcase.

2. Specifications

General Information

Item Details
Product TypeSingle Output / Multi-Output Switching Power Supply
Input VoltageAC 100 ~ 240V (50/60Hz) – Universal Input
Output VoltageDC 5V / 12V / 24V / 48V (Customizable, ±1% Accuracy)
Output Current1A ~ 30A (Depends on Model)
Power Rating15W ~ 600W (Continuous Output)
Efficiency≥85% (Typical, Full Load)
Power Factor≥0.9 (At 110VAC/220VAC, Full Load)
Working Temperature0°C ~ +60°C (Operating) / -20°C ~ +85°C (Storage)
Protection FunctionsOverload (OLP) / Overvoltage (OVP) / Short Circuit (SCP) / Over Temperature (OTP)
Cooling MethodNatural Convection / Built-in Fan Cooling
Housing MaterialCold-Rolled Steel / Aluminum Alloy
IP RatingIP20 (Indoor Use) / IP65 (Waterproof, Optional)
ApplicationIndustrial Automation, CNC Equipment, LED Lighting, Medical Devices, Telecommunications

S-350 Series Specific Parameters

Table of S-350 series power supply specifications including DC voltage, rated current, ripple, voltage adjustment range, and protection features.

Image: Detailed specifications for S-350-12, S-350-24, S-350-36, and S-350-48 models.

Parameter S-350-12 S-350-24 S-350-36 S-350-48
DC Voltage12V24V36V48V
Rated Current29A14.6A9.7A7.3A
Current Range0-29A0-14.6A0-9.7A0-7.3A
Rated Power348W350.4W349.2W350.4W
Ripple and Noise150mVp-p150mVp-p240mVp-p240mVp-p
Voltage Adjustment Range10-13.2V20-26.4V32-40V41-56V
Voltage Accuracy±1.0%±1.0%±1.0%±1.0%
Linear Adjustment Rate±0.5%±0.5%±0.5%±0.5%
Load Regulation±0.5%±0.5%±0.5%±0.5%
Start, Rise Time200ms50ms
Hold Time20ms
Voltage Range90-132VAC/180-264VAC (Can be selected by switch) OR 254-370VDC
Frequency Range47-63Hz
Frequency (Typ.)74%81%83%83%
AC Current (Typ.)6.5A/115VAC 4A/230VAC
Inrush Current (Typ.)50A/115VAC 50A/230VAC
Leakage Current<3.5mA/240VAC
Overload Protection105%-135% of rated output power starts overload protection. Protection mode: constant current display, automatic recovery after the abnormal load condition is removed.
Overvoltage Protection13.8-16.2V27.6-32.4V40.5-46.5V57.6-67.2V
Fan Switch ControlRTH≥50°C, Fan on, ≤45°C, Fan off, ≥80°C (5-7.5V) cut off output. RTH≥55°C Fan on, ≤50°C Fan off, ≥85°C (12-48V) cut off output.
Operating Temperature-10~+60°C (Please refer to load derating curve)
Working Humidity20-90% RH no condensation
Storage Temperature and Humidity-20~+85°C, 10-95%RH
Temperature Coefficient±0.03%/°C (0-50°C)
Vibration Resistant10-500Hz, 2G 10min/1 cycle, 60 minutes in total
Withstand VoltageI/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
Insulation ResistanceI/P-O/P I/P-FG:100M Ohms/500VDC 70%RH
HLTNC S-350-60 power supply with dimensions 215mm x 115mm x 50mm and key specifications.

Image: Product dimensions and key specifications for S-350-60 model.

3. Setup (Installation Instructions)

3.1 Pre-Installation Preparation

  1. Verify the power supply model (output voltage, current, power rating) matches your equipment requirements.
  2. Inspect the product for physical damage: Check the housing, power cord, and output terminals for cracks, scratches, or loose connections. Do not use damaged products.
  3. Confirm the installation environment meets the requirements:
    • Indoor use (IP20 models) or waterproof area (IP65 models).
    • Keep away from flammable materials, corrosive gases, and strong electromagnetic interference.
    • Ensure sufficient ventilation space (≥10cm around the housing for heat dissipation).
  4. Prepare necessary tools: Screwdrivers (Phillips/flathead), wire strippers, crimping tools, and insulation tape.
  5. Disconnect the main power supply before installation to avoid electric shock.

3.2 Mounting Procedures

Option 1: DIN Rail Mounting (For Industrial Models)

  1. Align the power supply's DIN rail clips with the standard 35mm DIN rail.
  2. Push the power supply onto the rail until it locks into place with a "click".
  3. Tighten the locking screw (if equipped) to prevent accidental dislodgment.

Option 2: Wall/Panel Mounting

  1. Mark the mounting hole positions on the wall/panel according to the power supply's mounting hole layout.
  2. Drill holes (diameter matching the mounting screws) and insert expansion tubes (for concrete walls).
  3. Place the power supply on the mounting surface and secure it with screws (M4 ~ M6, depending on model weight).
  4. Ensure the power supply is installed horizontally or vertically for optimal heat dissipation.

Option 3: Desktop Use (For Compact Models)

  1. Place the power supply on a flat, dry, and stable surface.
  2. Ensure the ventilation holes on the bottom/side are not blocked.

3.3 Wiring Connections

Wiring diagram for a switching power supply showing connections for potentiometer, DC positive, DC negative, ground, and AC input.

Image: Wiring diagram illustrating input and output connections.

3.3.1 Input Wiring (AC Power)

  1. Strip the insulation of the input power cord (3 cores: L-Live, N-Neutral, PE-Earth) by 6~8mm.
  2. Connect the wires to the input terminal block:
    • L (Live): Connect to the brown/black wire of the power cord.
    • N (Neutral): Connect to the blue wire of the power cord.
    • PE (Earth): Connect to the green/yellow wire (mandatory for safety; do not omit).
  3. Tighten the terminal screws to ensure firm connections (avoid loose wires causing arcing).
  4. For hard-wired models: Use copper wires with cross-sectional area ≥1.5mm² (for 10A max) or ≥2.5mm² (for 16A max).
  5. For plug-in models: Insert the power plug into a grounded AC outlet (confirm the outlet voltage matches the input range).

3.3.2 Output Wiring (DC Power)

  1. Strip the insulation of the output wires by 4~6mm.
  2. Connect the positive (+) output terminal to the positive wire of the load (usually red).
  3. Connect the negative (-) output terminal to the negative wire of the load (usually black).
  4. For multi-output models: Connect each output channel to the corresponding load (refer to the label on the power supply).
  5. Tighten the output terminal screws; ensure no bare wire is exposed (to prevent short circuits).
  6. Do not reverse the positive and negative poles (may damage the power supply and load).

3.4 Post-Installation Check

  1. Double-check all wiring connections for correctness (input L/N/PE, output +/-).
  2. Ensure the power supply is securely mounted and there is no wire entanglement.
  3. Confirm the ventilation space is sufficient and no obstacles block the heat dissipation holes.
  4. Remove any tools or debris from the installation area.

4. Operating Guidelines

4.1 Initial Start-Up

  1. Turn on the main power switch (if equipped) or plug in the power cord.
  2. Check the power indicator light (usually green) - it should be on, indicating normal power supply.
  3. Use a multimeter to measure the output voltage: Confirm it matches the rated output voltage (±1% tolerance).
  4. Run the load at 50% capacity for 30 minutes to test stability:
    • Monitor the power supply's surface temperature (should not exceed 60°C for natural convection models, 70°C for fan-cooled models).
    • Check for abnormal noise (fan models) or odor.
    • Verify the load operates normally without glitches.

4.2 Normal Operation

  1. Operate the power supply within the rated output current and power range (do not overload beyond 110% of rated capacity).
  2. Maintain a stable input voltage (avoid frequent voltage fluctuations exceeding ±10%).
  3. For fan-cooled models: Ensure the fan is running smoothly (replace the fan if it makes abnormal noise or stops working).
  4. Do not turn the power supply on/off frequently (interval between on/off should be ≥3 seconds).

4.3 Operating Limits

  1. Do not use the power supply in environments with temperature exceeding +60°C or humidity above 90% (non-condensing).
  2. Avoid direct sunlight, rain, or water splashing (IP20 models).
  3. Do not block the heat dissipation holes – this will cause overheating and trigger the over-temperature protection.
  4. Keep the power supply away from high-voltage equipment or strong magnetic fields to avoid interference.

5. Maintenance

5.1 Routine Maintenance

Monthly Inspection:

  • Clean the surface and heat dissipation holes with a dry brush or compressed air (disconnect power first).
  • Check wiring connections for looseness and retighten if necessary.
  • Verify the power indicator light works normally.
  • Check the power cord for damage (replace if cracked or frayed).

Quarterly Maintenance:

  • Measure the output voltage with a multimeter to ensure it is within the specified range.
  • Inspect the fan (if equipped) for dust accumulation and clean it.

Annual Maintenance:

  • Complete disassembly (if necessary) to clean internal dust (only by qualified personnel).
  • Inspect internal components for signs of aging (e.g., bulging capacitors) and replace if needed.
  • Test all protection functions (overload, short circuit) to ensure they work properly.

6. Troubleshooting

6.1 Troubleshooting Guide

Problem Possible Cause Solution
No output voltage (indicator off)No input power / Loose input wiring / Faulty power switchCheck AC power supply; Reconnect input wires; Replace power switch
No output voltage (indicator on)Overload / Short circuit in load / Over-temperature protection triggeredReduce load to rated capacity; Repair short circuit in load; Cool down the power supply and restart
Output voltage unstableLoose output wiring / Input voltage fluctuation / Internal component failureRetighten output wires; Use a voltage stabilizer; Contact technical support for repair
Power supply overheatsPoor ventilation / Blocked heat dissipation holes / Fan failure (if equipped)Improve ventilation; Clean heat dissipation holes; Replace faulty fan
Abnormal noiseFan damage / Loose internal components / Input voltage instabilityReplace fan; Tighten internal components (qualified personnel only); Stabilize input voltage
Indicator light flashesOverload protection / Over-temperature protection / Faulty loadReduce load; Cool down the power supply; Inspect and repair the load
Short circuit protection triggeredShort circuit in output wiring / Reverse polarity connectionCheck output wires for short circuit; Correct the polarity connection

7. Safety Notes

7.1 Electric Shock Prevention:

  • Always disconnect the power supply before installation, wiring, or maintenance.
  • Ensure proper grounding (PE wire connection) to avoid electric shock.
  • Do not touch the input/output terminals with bare hands during operation.

7.2 Fire Prevention:

  • Keep the power supply away from flammable materials (paper, cloth, oil).
  • Do not overload the power supply for long periods (may cause overheating and fire).

7.3 Personal Protection:

  • Wear insulated gloves and goggles during wiring and maintenance.
  • Use tools with insulated handles to avoid short circuits.

7.4 Other Warnings:

  • Do not disassemble, modify, or repair the power supply without manufacturer authorization (may void the warranty and cause safety hazards).
  • Do not use the power supply in explosive or corrosive environments.
  • For waterproof (IP65) models: Ensure the cable glands are tightly sealed to prevent water ingress.

8. User Tips

  • For 3D Printer Applications: This power supply features stable output with ±1% voltage regulation and comprehensive protection mechanisms (overload, overvoltage, short circuit, over-temperature). These features make it suitable for applications with fluctuating loads, such as 3D printers where heating elements can cause voltage spikes. Ensure the power supply's output specifications (voltage and current) match your 3D printer's requirements.
  • Optimal Cooling: Always ensure adequate ventilation around the power supply. For fan-cooled models, regularly check and clean the fan to prevent dust buildup, which can impair cooling efficiency and lead to overheating.
  • Load Management: Avoid consistently operating the power supply at its maximum rated capacity. Running it at 80-90% of its rated load can extend its lifespan and ensure stable performance, especially in continuous operation.

9. Warranty & Support

9.1 Warranty Terms

  • This product comes with a 24-month warranty against material and manufacturing defects under normal use and maintenance.

Warranty Exclusions:

  • Damage caused by improper installation, wiring, overload, or misuse.
  • Damage from natural disasters (earthquake, flood), fire, or voltage surge.
  • Wear and tear of consumable parts (e.g., fan) beyond their service life.
  • Damage from unauthorized disassembly, modification, or repair.

9.2 Contact Information

For technical support, customization inquiries, or warranty claims, please contact the supplier:

  • Email: [supplier-email@example.com]
  • Phone: [supplier-phone-number]
  • Website: [supplier-website.com]

Print Date: [Leave blank for user to fill]
Document Version: V1.0

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.