1. Introduction
Thank you for choosing the TEKLEAD T-D8 Barcode Scanner. This compact and versatile scanning module is designed for integration into various systems, including self-service kiosks, access control systems, vending machines, and mobile payment solutions. It supports both 1D CCD and 2D CMOS scanning technologies, offering compatibility with a wide range of barcodes, including those displayed on screens.
Figure 1: TEKLEAD T-D8 Barcode Scanner with USB and RS232 cables
2. Product Features
- Compact Design: Mini size (49mm*38mm*20mm) for easy integration.
- Versatile Connectivity: Available with USB or RS232 (COM) interfaces.
- Broad Compatibility: Supports Windows (driver-free for Win10, driver-needed for Win7/8), Linux, and Android operating systems.
- Multiple Scanning Modes: Includes Manual Trigger, Auto-Induction, and Continuous modes.
- On-Screen Barcode Support: Capable of reading barcodes from phone screens and other digital displays.
- 1D CCD Sensor: Reads long, high-density, scratched, or blurred 1D barcodes.
- 2D CMOS Sensor: Reads multiple 1D & 2D barcodes (QR, Data Matrix, PDF417).
- International Keyboard Support: Supports various keyboard layouts and languages.
Figure 2: Scanner features and scanning modes
3. Setup Instructions
3.1 Package Contents
Ensure all components are present:
- TEKLEAD T-D8 Barcode Scanner Module (CCD or 2D CMOS variant)
- USB Cable (for USB models)
- RS232/COM Cable with power supply (for RS232 models)
Video 1: Product overview and interface demonstration
3.2 Connecting the Scanner
The scanner is available with either a USB or RS232 interface. Choose the appropriate connection method for your system.
3.2.1 USB Connection
- Connect the USB cable from the scanner module to an available USB port on your host device (PC, Kiosk, etc.).
- For Windows 10, the scanner is typically plug-and-play and driver-free.
- For Windows 7, 8, or other operating systems, a driver may be required. Please refer to the official TEKLEAD website or the provided PDF manual for driver downloads.
Figure 3: USB Port Connection
3.2.2 RS232 (COM) Connection
- Connect the RS232 cable from the scanner module to the serial port (DB9) on your host device.
- Ensure the separate power supply cable (usually USB to DC barrel jack) is connected to a power source and then to the RS232 adapter, as RS232 typically does not provide power.
Figure 4: RS232 Port Connection with Power Supply
Figure 5: USB and RS232/COM Cables
3.3 Initial Configuration
The scanner can be configured by scanning specific QR codes found in the detailed PDF user manual. A link to this manual is provided in Section 6.1.
To restore factory default settings, scan the 'Restore factory default settings' QR code from the PDF manual.
To enable or disable configuration mode, scan the 'Configuration code on' or 'Configuration code off' QR codes respectively. The default is 'Configuration code on'.
4. Operating Instructions
4.1 Scanning Modes
The scanner supports different operational modes:
- Manual Trigger Mode: Scan a barcode by pressing the button on the scanner. (Default for 1D and 2D)
- Auto-Induction Mode (2D only): The scanner automatically detects and scans barcodes when presented within its field of view.
- Continuous Mode: The scanner continuously scans for barcodes without requiring a trigger press.
To change the scanning mode, refer to the PDF manual and scan the corresponding QR code (e.g., '*Manual trigger', 'Continuous mode', 'Sense mode').
Figure 6: Scanning Modes
4.2 Indicator Lights and Sounds
The scanner provides visual and auditory feedback. These can be configured using QR codes in the PDF manual:
- LED Light: Can be set to 'On when reading' (default), 'Always on', or 'Always off'.
- Aiming Red Light: Can be set to 'On when reading' (default), 'Always on', or 'Always off'.
- Indicator Sound: Can be turned 'on' (default) or 'off'.
- Indicator Sound Volume: Can be set to 'High' (default), 'Middle', or 'Low'.
- Decoding Sound: Can be turned 'on' (default) or 'off'.
- Start up indicator sound: Can be turned 'on' (default) or 'off'.
- Configuration indicator sound: Can be turned 'on' (default) or 'off'.
Figure 7: Indicator Light and Button
4.3 Keyboard Language and Output Settings
The scanner supports various keyboard languages and output formats. These settings are crucial for correct data interpretation by your host system.
- Keyboard Languages: Default is 'American English'. Other supported languages include British English, Spanish, French, German, Italian, Finland, Belgian, Hungarian, Danish, Swedish, Norwegian, Portuguese, Turkey Q, Turkey F, Japanese, Russian, and Arabic (Egypt). Select the appropriate language by scanning the corresponding QR code in the PDF manual.
- Uppercase and Lowercase Setting: Output can be 'Normal' (default), 'All uppercase', 'All lowercase', or 'Reverse lower and upper'.
- Terminator: A character format added after decoding data. Options include '*No terminator' (default), 'CR LF' (Carriage Return Line Feed), 'CR' (Carriage Return), or 'TAB'.
Figure 8: Supported Languages
4.4 Barcode Type Enable/Disable
The scanner supports a wide array of 1D and 2D barcode symbologies. To optimize performance and prevent unintended reads, you can enable or disable specific barcode types by scanning the relevant QR codes in the PDF manual. Default settings are marked with an asterisk (*).
1D Barcodes:
- UPC-A (*Enable)
- UPC-E (*Enable)
- EAN-8 (*Enable)
- EAN-13 (*Enable)
- Bookland EAN (Disable*)
- UPC/EAN Additional Digits (Disable* to read additional digits)
- CODE 128 (*Enable)
- GS1-128 (*Enable)
- ISBT-128 (*Enable)
- Interleaved 2 of 5 (*Enable)
- Matrix 2 of 5 (Disable*)
- Industrial 2 of 5 (Disable*)
- Standard 2 of 5 (Disable*)
- Code 39 (*Enable)
- Code 39 Full ASCII (Disable*)
- Code 93 (Disable*)
- Code 11 (Disable*)
- Codabar (Disable*)
- MSI (Disable*)
- GS1-Databar (Disable*)
2D Barcodes:
- QR Code (*Enable)
- Data Matrix (*Enable)
- PDF 417 (*Enable)
- Aztec code (Disable*)
- Maxi code (Disable*)
Figure 9: Scanning 1D Barcodes from Screen
Figure 10: Scanning 2D QR Codes from Screen
5. Troubleshooting
This section addresses common issues you might encounter with your barcode scanner.
- Q: Why can't some barcodes be read?
- A: This product can read all common 1D and 2D barcodes (refer to specifications for details). Some unused barcode types may need to be enabled via configuration. If a barcode is severely damaged or very obscure, it might not be readable. If issues persist, contact support for professional assistance.
- Q: Can I add or remove Enter and suffix?
- A: Yes, the scanner supports common barcode functions including line feed, suffix, and storage mode. Customized services for functionality and appearance may also be available.
- Q: What should I do if garbled characters appear?
- A: This usually indicates a mismatch between the barcode scanner's language setting and the host system's keyboard language. The scanner is typically pre-configured to the customer's region. If garbled characters occur, refer to the PDF manual to set the correct keyboard language by scanning the appropriate QR code.
- Q: What should I do if the data is not uploaded?
-
- First, confirm that the host terminal and interface are functioning normally. Try testing with other devices.
- Since the barcode scanner, keyboard, and mouse are all USB input devices, if the host terminal cannot use the mouse and keyboard normally, data upload will also fail.
- Confirm if the barcode scanner has other settings enabled, such as storage mode or virtual serial port mode. Restore factory settings before re-testing.
- If using a wireless model (not applicable to this wired model, but generally for wireless scanners), ensure it is properly paired and not disconnected.
Figure 11: Troubleshooting Reference
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | TEKLEAD |
| Model Number | T-D8 |
| Type | Barcode Scanner |
| Interface Type | USB/RS232 |
| Scan Element Type | CMOS (for 2D) / CCD (for 1D) |
| Scanning Light Source | LED |
| Scan Speed | 200 scans/second |
| Optical Resolution | 640*480 |
| Scan Breadth | A4 |
| Scan Distance | 0~350mm |
| Dimensions (L*W*H) | 49mm * 38mm * 20mm |
| Weight | Approx. 0.13 kg (packaged) |
| Certification | CE |
Figure 12: Scanner Dimensions
Figure 13: Scan Distance
7. Maintenance
To ensure optimal performance and longevity of your TEKLEAD T-D8 Barcode Scanner, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the scanner's exterior. For the scanning window, use a lint-free cloth lightly dampened with a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive materials that could scratch the lens.
- Storage: Store the scanner in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the scanner or subjecting it to strong impacts, as this can damage internal components.
8. User Tips
- Optimal Scanning Angle: For best results, hold the scanner at a slight angle to the barcode to minimize glare, especially when scanning from glossy surfaces or screens.
- Screen Brightness: When scanning barcodes from phone screens, ensure the screen brightness is set to a high level for better readability.
- Test Different Modes: Experiment with Manual Trigger, Auto-Induction, and Continuous modes to find the most efficient setting for your specific application.
9. Warranty and Support
9.1 PDF User Manual
For detailed configuration settings, including specific QR codes for advanced features and troubleshooting, please refer to the comprehensive PDF user manual:
- 2D CMOS Model Manual: Download 2D Manual
- 1D CCD Model Manual: Download CCD Manual
The PDF manual contains scannable QR codes for direct configuration of various parameters such as interface type (USB KBW, USB COM), scanning modes, indicator settings, keyboard languages, output terminators, and enabling/disabling specific barcode types.
A general PDF manual for the TEK-E2 3189 engine USB User setting is also available: View General Setting Manual (PDF)
9.2 Technical Support
If you encounter any issues not covered in this manual or the PDF documentation, please contact TEKLEAD customer support for assistance.