1. Introduction
The RETEKESS TT106 is a professional UHF wireless receiver designed for use in tour guide systems, museum excursions, training sessions, conferences, and simultaneous interpretation. This manual provides essential information for the safe and effective operation of your TT106 receiver and its accompanying transmitter (TT106).
2. Safety Information and RF Energy Exposure
ATTENTION! Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.
RF Energy Exposure
This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications. Improper use can cause biological damage. All Retekess radios are designed, manufactured, and tested to meet government-established RF exposure levels. Users should be fully aware of and able to control their exposure to meet occupational requirements. Refer to www.who.int/en/ for more information on RF energy exposure.
Local Government Regulations
When radios are used in employment, local government regulations require users to be fully aware of and able to control their exposure. Your Retekess radio has an RF Exposure Product Label, and this manual includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.
Radio License (if appropriate)
Business radios operate on regulated radio frequencies. To transmit on these frequencies, a license issued by local radio management departments (e.g., FCC, ISED, OFCOM) may be required. Contact your local government radio management departments for detailed classification and use of your radios. Use of this radio outside the intended country of distribution is subject to government regulations and may be prohibited.
Unauthorized Modification and Adjustment
Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this radio. Transmitter adjustments should only be made by or under the supervision of a technically qualified person. Replacement of any transmitter component not authorized by the local government radio management departments equipment authorization for this radio could violate rules.
FCC Requirements
- This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- If this equipment does cause harmful interference to radio or television reception, try reorienting or relocating the receiving antenna, increasing separation, or connecting the equipment to a different circuit. Consult the dealer or an experienced radio/TV technician for help.
CE Requirements
Henan Eshow Electronic Commerce Co.,Ltd declares that the radio equipment type is in compliance with RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at www.retekess.com.
Disposal: The crossed-out wheeled-bin symbol on your product indicates that all electrical and electronic products, batteries, and accumulators must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste; dispose of them according to the laws in your area.
IC Requirements (Licence-exempt radio apparatus)
- This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including that which may cause undesired operation of the device.
RF Exposure Information
- DO NOT operate the radio without a proper antenna attached, as this may damage the radio and cause you to exceed RF exposure limits. Use only manufacturer-supplied or authorized antennas.
- DO NOT transmit for more than 50% of total radio use time, as this can cause RF exposure compliance requirements to be exceeded.
- During transmissions, your radio generates RF energy that can cause interference. Turn off the radio in areas where signs are posted to do so.
- The device complies with RF specifications when used at 5mm from your body. Third-party belt-clips, holsters, and similar accessories should not contain any metallic components.
- DO NOT operate the transmitter in areas sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.
Avoid Choking Hazard
Small Parts. Not for children under 3 years.
Protect Your Hearing
- Use the lowest volume necessary.
- Turn up the volume only if in noisy surroundings.
- Turn down the volume before adding headset or earpiece.
- Limit the amount of time you use headsets or earpieces at high volume.
- When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
- Excessive sound pressure from earphones and headphones can cause hearing loss.
Avoid Burns
- Antennas: Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with the skin when the radio is in use, a minor burn can result.
- Batteries: When conductive material (jewelry, keys, chains) touches exposed terminals of the batteries, it may short circuit the battery and become hot, causing burns. Exercise care in handling any battery.
- Long transmission: When the transceiver is used for long transmissions, the radiator and chassis will become hot.
Safety Operation (Charger)
- Do not use charger outdoors or in moist environments; use only in dry locations/conditions.
- Do not disassemble the charger, as this may result in risk of electrical shock or fire.
- Do not operate the charger if it has been broken or damaged.
- Do not place a portable radio in the area over an air bag or in the air bag deployment area.
- Pull by the plug rather than the cord when disconnecting the charger.
- Unplug the charger from the AC outlet before attempting any maintenance or cleaning.
- Contact Retekess for assistance regarding repairs and service.
- The adapter shall be installed near the equipment and shall be easily accessible.
- Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
- The plug is considered the disconnect device of the adapter.
- The operating temperature of the EUT cannot exceed the specified range.
Approved Accessories
This radio meets RF exposure guidelines when used with Retekess accessories supplied or designated for the product. Use of other accessories may not ensure compliance with RF exposure guidelines and may violate regulations. For a list of Retekess-approved accessories, visit www.Retekess.com.
3. Product Overview
The RETEKESS TT106 receiver is a compact and lightweight device designed for comfortable, long-term wear. It features a 2.4GHz transmission for stable and clear audio, supporting up to 9999 channels to avoid interference in multi-group environments.
Key Features:
- Built-in Rechargeable Battery: Equipped with a 380mAh lithium battery, providing up to 23 hours of continuous use on a full charge.
- 2.4GHz Transmission: Ensures stable, interference-free communication and clear audio.
- One-touch Mute/Power Off: Can be muted or turned off remotely via the transmitter.
- 9999 Channels: Offers extensive channel options for flexibility and interference avoidance in large groups or events.
- 150m Working Distance: Provides clear communication over a significant range.
- Adjustable Volume: Dedicated buttons for volume control on the receiver.
- No-Ear Design: Hygienic and comfortable for extended wear.
- Silicone Material: Durable and comfortable construction.
Package Contents:
- TT106 Receiver
- Lanyard
- USB Charging Cable
- English Manual
4. Setup
Charging the Receiver
Before first use, fully charge the TT106 receiver. The receiver has a built-in 380mAh lithium battery.
Using a Charging Case (if applicable):
- Connect the charging case to a power supply (AC 90V-250V).
- Remove the foam and keep the cover open.
- It takes approximately 3 hours to fully charge the receivers and 6 hours for transmitters.
Using a Single Charger:
- It takes approximately 2 hours to fully charge a receiver and 4 hours for a transmitter.
5. Operating Instructions
Transmitter (Model: TT106) Operations
- ON/OFF Operation:
- Turn on: Keep pressing the "M" button for 1 second. Insert the microphone to speak.
- Turn off: Keep pressing the "M" button for 1 second.
- Mute Function and Operation:
Under working conditions, click the "H" button to mute the transmitter. The antenna icon on the screen will flash, and receivers will not receive the signal. Click the "H" button again to unmute; the antenna icon will stop flashing, and receivers will receive the signal.
Figure 5: Mute or Turned Off Function - Click One Button to Turn Off All Receivers:
Under working conditions, keep pressing the "K" button for about 5 seconds until the screen flashes. All connected receivers will be forcibly turned off. You can click any button on the transmitter to quit or keep pressing the "M" button to turn off.
Figure 6: One-touch mute/power off via transmitter - Channel Setting:
When to set channels: If multiple groups use devices at the same location, set different channels to avoid interference. If adding more receivers to a group, ensure their channels match the existing group's channel. The transmitter and receivers in a group must have the same channel.
How to set channels: Under working conditions, press both "H" and "K" buttons simultaneously until the channel icon on the screen changes from "M" to "ID". Release the buttons. The transmitter is now in channel setting mode (the right-most figure of the channel number will be flashing). Use "H" or "K" buttons to change the channel number (0001 to 9999). Use the "K" button to select the digit to change, then "H" to change the digit's value (0-9). After setting the channel number, keep pressing "M" for about 3 seconds until the four-figure channel number starts flashing. The transmitter enters wireless channel matching status. Place turned-on receivers within 2 meters of the transmitter. The receivers' channels will match the transmitter's channel, and their flashing blue light will turn to stable blue light. Click the transmitter's "M" button to exit channel matching status.
Figure 7: 9999 Channels Support - Wireless Channel Setting (Transmitter Input):
The transmitter has an MIC input hole for the microphone and an AUX audio input hole. The transmitter will automatically turn off if no plug is detected in these input holes within 6 minutes. Ensure the microphone is plugged into the MIC input hole for proper function.
- Using Two Transmitters at the Same Time in One Group:
This product allows two transmitters to work simultaneously or alternately in one group. To use two transmitters, turn on one transmitter first, then the second. Do not turn on both at the same time. The first transmitter turned on will display 'M' on its screen, and the second will display 'S'. If both display 'M', turn one off and then on again.
Receiver (Model: TT106) Operations
- ON/OFF Operation:
- Turn on: Keep pressing the power button for 1 second until the indicator light turns on.
- Turn off: Keep pressing the power button for 1 second until the indicator light turns off. The receiver can also be turned off remotely by the transmitter's "Click one button to turn off all receivers" function.
After turning on:
- If a transmitter with the same ID is speaking nearby (within 150 meters), the receiver will receive the audio, and its blue light will flash once every 3 seconds.
- If a transmitter is in ID matching status nearby (within 2 meters), the receiver's ID will automatically match the transmitter's ID, and its flashing blue light will turn to stable blue light.
- Volume Adjustment:
Click the "+" or "-" buttons to adjust the volume. If the signal is lost, you will hear a prompt tone until it enters power-saving mode. You can click any button to turn it off. No prompt tone will sound if the transmitter is turned off.
Figure 9: Adjustable Volume Controls - Battery Status:
The indicator light flickers after the receiver is turned on. The number of flickers indicates the battery level:
- 5 flickers: Full battery
- 4 flickers: 80% battery remaining
- ...
- 1 flicker: 20% battery remaining
6. Maintenance
- If the transmitters and receivers are not used for a long time, charge them once every 3 months to protect the lithium batteries from damage.
- Keep the devices clean and hygienic. The "no-ear" design of the TT106 receiver facilitates this.
7. Troubleshooting
- No Signal Reception: Ensure the receiver is turned on and within range (150m) of an active transmitter on the correct channel. Check the transmitter's mute status.
- Interference/Crosstalk: If multiple groups are using devices in the same location, ensure each group has a unique channel set. For new installations, consider resetting to a complicated channel number instead of the default.
- Microphone Not Working (Transmitter): Ensure the microphone is plugged into the dedicated MIC input hole, not the AUX audio input hole.
- Battery Not Holding Charge: If devices are unused for extended periods, ensure they are charged every 3 months to prevent battery damage.
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | retekess |
| Model | TT106 |
| Origin | Mainland China |
| Certification | CE, FCC |
| FCC ID | 2AAR8TT105 |
| Frequency Response | 2400~2483MHz |
| Battery Type | Built-in Lithium Battery (380mAh) |
| Communication | Wireless |
| Use | Guide System |
| Channels Supported | 9999 |
| Working Distance | Up to 150m |
| Dimensions (approx.) | 65mm (L) x 58mm (H) x 11mm (W) |
| Weight | 18g |
| Enclosure Material | Silicone material |
9. User Tips
- Ear Holder Longevity: Some users have noted that ear holders may wear out over time. Consider purchasing spare ear holders if available, or handle them with care to extend their lifespan.
- Optimal Channel Selection: For tour companies or tourist attractions, it's recommended to reset to a unique, non-default channel number to avoid crosstalk issues with other groups using similar devices.
- PDF Manual: For a detailed PDF version of the user manual, please refer to the official document available at this link.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the official Retekess customer service. Keep your purchase receipt as proof of purchase.