1. Product Overview
The SUZ S201 Table Tennis Robot is an advanced training machine designed for solo table tennis practice. It features a ball recycling net system that can accommodate approximately 300 table tennis balls, eliminating the need for manual ball collection during training sessions. The robot is controlled via a wired remote, allowing for precise adjustments to various functions. Its intelligent design enables the serving of 9 different types of spin balls (topspin, backspin, left-spin, right-spin, mixed spin, and non-spin) with adjustable frequency and speed. Analog controls provide flexibility for ball speed, frequency, oscillation, and ball strength/height, making it suitable for players of all levels.

2. Package Contents
Before setup, ensure all components are present in the package:

- Control Box
- Post Set
- Control Box Fix Frame
- Power Adapter
- Measuring Tool
- Two Serving Wheels (only for S201)
- English Manual
- Table Tennis Robot Unit with Ball Recycling Net
3. Setup Instructions
- Unpack Components: Carefully remove all items from the packaging and verify against the package contents list.
- Attach to Table: The S201 robot is designed to clip onto a standard table tennis table. Securely attach the robot unit to the end of the table using the provided clip mechanism.
- Install Ball Recycling Net: Extend and set up the ball recycling net around the robot and table to ensure efficient ball collection.
- Connect Power: Locate the power line interface on the robot and connect the power adapter. Plug the adapter into a suitable power outlet (100V-240V).

Power Line Interface - Load Balls: Ensure the machine is OFF before loading balls. Add standard 40+ table tennis balls into the storage tube. The robot can hold more than 200 balls.
- Positioning: Adjust the position of the machine on the table according to your preferences for optimal training.


4. Operating Instructions
The SUZ S201 Table Tennis Robot is controlled via a wired remote control. Familiarize yourself with the control panel functions:

- Oscillation: Adjusts the left and right oscillation speed of the robot head. A higher number indicates faster oscillation. Number 0 is a fixed point (no oscillation).
- Frequency: Adjusts the speed of serving per minute. A higher frequency means more balls are served faster.
- Topspin/Backspin: Adjusts the ball's speed/strength and changes the ball's landing spot. Topspin and underspin can be simultaneously increased to strengthen the serve. If topspin and underspin settings are the same number, there is no spin. When topspin is higher than underspin, the serve is topspin. When underspin is higher than topspin, the serve is underspin.
- Start/Pause: Starts or stops the robot.
- OneKey Topspin: Quickly sets the robot to serve topspin.
- OneKey Backspin: Quickly sets the robot to serve backspin.
- Direct Service: Quickly sets the robot to serve no spin.
- Irregular Service: Quickly sets the robot to serve balls irregularly.
- Unload Ball: Automatically unloads balls from the robot.
4.1 Spin Ball Control
The robot can serve 9 kinds of spin balls and one non-spin. The head can oscillate between 180 degrees (horizontal line).

- Top Rotation: Set topspin modulation above 2 and downward spin to 1. The ball will rotate upward.
- Downward Spiral (Backspin): Set topspin modulation to 1 and downward spin above 2. The ball will be sent downward.
- No Rotation: Set topspin and downward spin modulations to the same number. The ball will not rotate.
4.2 Ball Elevation Adjustment
To adjust the elevation of the robot head, loosen the copper knob. Ensure you stop adjusting when the robot is working to prevent damage.

4.3 Demonstration Video
5. Maintenance
- Ball Cleaning: Always clean new table tennis balls with clean water or a cleaning agent and dry them thoroughly before use. This prevents dirt and debris from affecting the robot's performance.
- Robot Cleaning: Regularly clean the balls and the ball groove to keep the machine clean and reduce the risk of failure or ball jamming.
- Preventing Ball Clamping: Always add balls to the storage tube ONLY when the machine is OFF to avoid clamping balls.
- Long-Term Storage: If the robot will not be used for an extended period, clean it thoroughly and store it in good storage bags to protect it from dust and damage.
- Cleaning Ball Pathway: To clean dust or bad balls from the internal pathway, twist the two designated screws as shown in the diagram.

Cleaning the Ball Pathway
6. Troubleshooting
- Ball Jamming/Clamping:
- Ensure you are using standard 40+ table tennis balls. Avoid balls that are too soft or irregular, as these can cause clamping.
- Always load balls when the machine is OFF.
- Regularly clean the balls and the ball groove to prevent blockages. Refer to Section 5 for cleaning instructions.
- Inconsistent Performance:
- Before starting a game or intense training, warm up the robot's engine for 3-5 minutes. Set both Topspin and Backspin adjustments to position 3 during warm-up.
- Verify that the power connection is secure and stable.
- General Issues: If you encounter any problems not covered here, please contact the seller's after-sale service for assistance.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | SUZ |
| Model | S201 |
| Color | Black |
| Assembly Location | Clip on table |
| Ball Elevation Angle Adjustment | Loosen copper knob (stop adjusting when working) |
| Spin Types | Topspin, Underspin, Non-spin, Left Sidespin, Right Sidespin (9 kinds total) |
| Serving Frequency | 35-80 balls/minute |
| Suitable for Balls | 40+ mm |
| Serving Speed | 4-40 m/s |
| Point of Fall | Random |
| One-Button Unloading Balls | Yes |
| Maximum Ball Capacity | Approx. 300 balls |
| Gross Weight (G.W.) | 9.8 Kg |
| Net Weight (N.W.) | 6.5 KGS |
| Packing Dimensions | 88 x 40 x 41 cm |
| Rated Voltage | 100V-240V |
| Rated Power | 50W |
| Rated Frequency | 50/60HZ |
| Ball Recycling Net | Yes |
| Remote Control | Wired, Digital Display |
8. User Tips
- Familiarize Yourself: Take time to understand all the functions on the wired remote control before extensive use. Experiment with different spin, frequency, and oscillation settings to find what works best for your training needs.
- Ball Quality: Using high-quality, standard 40+ table tennis balls (like SUZ brand training balls or other 1-star or higher balls) will significantly improve the robot's performance and reduce issues like ball jamming.
- Ball Recycling Net: The robot comes with a ball recycling net, which automatically collects balls, making solo training much more convenient.
- Children's Use: Children must use the robot under the guidance of adults or parents.
9. Warranty and Support
For any issues or problems with your SUZ S201 Table Tennis Robot, please contact the seller's customer service directly. They will provide assistance and support to resolve any concerns you may have.