Dynoracing 637X-7

Contents

Dynoracing 2" (52mm) 7-Color Car Gauge Instruction Manual

Models: Boost, EGT, Water Temp, Oil Temp, Oil Press, Air Fuel Ratio, Voltmeter, Tachometer

1. Introduction

Thank you for choosing a Dynoracing 2-inch (52mm) 7-Color Car Gauge. These high-performance gauges are designed to provide accurate and quick readings of various engine parameters, enhancing your driving experience and vehicle monitoring capabilities. Each gauge features a high-speed stepper motor for precise movement and a vibrant 7-color LED display for clear visibility in all conditions.

This manual provides essential information for the proper installation, operation, and maintenance of your Dynoracing gauge. Please read it thoroughly before installation and keep it for future reference.

2. Product Features

  • High-Speed Stepper Motor: Ensures quick and accurate needle response.
  • 7-Color LED Display: Clear and bright illumination with customizable colors.
  • Color Switching Button: Easily change display colors via a button on the lens.
  • Universal Fitment: Designed for 12V vehicles. Tachometer specifically for 4/6/8 cylinder gasoline cars.
  • Sensor Compatibility: Temperature and oil pressure sensors feature 1/8NPT thread size.

Video demonstrating the high-speed stepper motor response and 7-color LED display functionality.

3. Specifications

Attribute Value
Brand Name Dynoracing
Manufacturer Part Number 637X-7
Material ABS+STEEL+GLASS
Item Length 52MM
Item Width 52MM
Item Height 52MM
Item Weight 0.3KG-0.5KG
Special Features High speed stepper motor, 7-color backlight
Power DC(10-15V) 12V Professional
Current IGN MAX 0.3A ILM 0.3A
Number Of Cylinders (Tachometer) 4/6/8
Placement on Vehicle Front
Country/Region of Manufacture CN (Mainland China)
High-concerned chemical None
Gauge dimensions: 52mm diameter, 53mm depth, 58mm bezel

Diagram showing the dimensions of the 52mm gauge housing.

4. Package Contents

Each Dynoracing gauge package typically includes the following components, specific sensors vary by gauge type:

  • 1x Dynoracing 2" (52mm) Gauge (e.g., Boost, Water Temp, etc.)
  • 1x Mounting Ring
  • 1x Power Wiring Harness
  • 1x Instruction Manual (printed or digital)
  • Specific Sensor(s) (e.g., Boost Sensor, Water Temperature Sensor, Oil Pressure Sensor, EGT Sensor, etc. as applicable to the chosen gauge type)
  • Necessary Tubing/Fittings (e.g., Nylon Tubing for Boost/Vacuum gauge)
Gauge housing and mounting ring

Image showing the gauge housing and included mounting ring.

Package contents for Boost gauge bar, including gauge, wiring, tubing, and manual

Example package contents for a Boost gauge (bar).

Package contents for Water Temp gauge, including gauge, wiring, and water temperature sensor

Example package contents for a Water Temperature gauge.

5. Setup and Installation

Installation of Dynoracing gauges requires basic automotive electrical knowledge. If you are unsure, professional installation is recommended.

5.1 General Wiring Instructions

Refer to the detailed electrical diagram below for specific wiring connections for each gauge type. Ensure all connections are secure and properly insulated.

Detailed electrical wiring diagram for Boost/Vacuum, Tachometer, Oil/Water Temperature, Oil Pressure, Air Fuel Ratio, Voltmeter, and Exhaust Gas Temperature gauges.

Electrical wiring diagram for various Dynoracing gauges.

Key Wiring Connections:

  • Red Wire: Connect to Ignition Switch 12V (+).
  • Yellow Wire: Connect to Ignition Switch 12V (+).
  • Green Wire: Connect to Sensor (specific to gauge type).
  • Black Wire: Connect to Battery (-).

5.2 Specific Gauge Notes

  • Boost/Vacuum Gauge: Connect the nylon tubing to the boost/vacuum source.
  • Tachometer: Universal for 12V, 4/6/8 cylinder gasoline cars. Connect the green wire to the ignition coil or ECU tachometer signal.
  • Oil/Water Temperature & Oil Pressure Gauges: Sensors have 1/8NPT thread size. Ensure proper sealing during installation.
  • Air Fuel Ratio Gauge: Connect the green wire to the O2 sensor signal wire.
  • Exhaust Gas Temperature Gauge: Connect the orange wire to the EGT sensor.

For a more detailed guide, a user manual in PDF format is available. Please refer to the official product page or contact customer support for access to the PDF manual: User manual (PDF)

6. Operating Instructions

6.1 Power On/Off

The gauge will power on automatically when the vehicle's ignition is turned on and power is supplied to the red and yellow wires. It will power off when the ignition is turned off.

6.2 Changing Display Colors

Your Dynoracing gauge features a 7-color LED display. To change the color:

  1. Locate the small button on the lens of the gauge.
  2. Press the button briefly to cycle through the available 7 colors.
  3. The gauge also has a mode where it can automatically cycle through colors.

The selected color setting is remembered even after the engine is turned off, so you do not need to reconfigure it each time you start your vehicle.

Water temperature gauge displaying various backlight colors

Example of the 7-color LED display on a water temperature gauge.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the gauge lens and housing. Avoid abrasive cleaners or solvents that may damage the surface.
  • Wiring Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion.
  • Sensor Check: Ensure sensors are free from debris and properly seated.
  • Environmental Conditions: While designed for automotive use, avoid exposing the gauge to extreme temperatures or direct moisture for prolonged periods.

8. Troubleshooting

  • Gauge Not Powering On:
    • Check power connections (Red and Yellow wires to 12V ignition, Black wire to ground).
    • Verify vehicle's 12V power supply is active.
  • Inaccurate Readings:
    • Ensure the sensor is correctly installed and connected to the green wire.
    • Check for any damage to the sensor or its wiring.
    • For boost gauges, verify the integrity of the nylon tubing and connections to the boost source.
  • LED Display Not Changing Colors:
    • Ensure the button on the lens is functioning correctly.
    • Check for any loose connections to the gauge's power supply.
  • Tachometer Not Reading:
    • Confirm the green wire is correctly connected to the ignition coil or ECU tachometer signal.
    • Ensure the gauge is compatible with your vehicle's cylinder count (4/6/8 cylinder gasoline cars).

9. User Tips

  • Color Memory: The gauge remembers your last selected color setting, so you don't need to reset it every time you start your vehicle.
  • Sensor Thread Size: The temperature and oil pressure sensors use a standard 1/8NPT thread size, which is common for many automotive applications.
  • Professional Installation: For optimal performance and to avoid potential damage, consider professional installation, especially for complex wiring or sensor placement.

10. Certification and Compliance

This product is CE certified, indicating compliance with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).

CE Certificate of Conformity for Dynoracing automobile instruments

CE Certificate of Conformity.

11. Warranty and Support

For warranty information, technical support, or any inquiries regarding your Dynoracing gauge, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.