Dynoracing 2" 52mm 7-Color LED Dual Display Car Gauge Series

Contents

Dynoracing 2" 52mm 7-Color LED Dual Display Car Gauges User Manual

Model Series: 2" 52mm 7-Color LED Dual Display Car Gauge

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Dynoracing 2-inch (52mm) 7-Color LED Dual Display Car Gauge. These gauges are designed to provide accurate and real-time monitoring of various vehicle parameters, enhancing your driving experience and vehicle performance awareness. Please read this manual thoroughly before installation and use.

2. Key Features

  • High-speed Stepper motor for quick and accurate response.
  • Clear and bright adjustable 7-color LED backlight with digital display for enhanced visibility.
  • Easy color switching via a button located on the gauge lens.
  • Dual display functionality: Analog needle for quick reference and digital display for precise readings.
  • Universal fitment for various 12V car applications.
  • Sensors for temperature and oil pressure gauges feature a standard 1/8NPT thread size.

See the 7-color LED backlight in action:

Video: Demonstration of the 7-color LED backlight feature.

3. Specifications

Attribute Value
Brand Name Dynoracing
Material ABS+GLASS+METAL
Item Length 52MM
Item Width 52MM
Item Height 52MM
Item Weight 0.4KG
Power DC(10-15V) 12V Professional
Current IGN MAX 0.3A ILM 0.3A
Special Features Dual display
Colors Clear and bright LED Display with 7 colors
Fitment Universal for all 12V CAR
Placement on Vehicle Front
Country/Region of Manufacture CN
Origin Mainland China
Interchange Part Number Car meter
Manufacturer Part Number 637x
High-concerned chemical None

Gauge dimensions:

Diagram showing gauge dimensions: 52mm diameter, 53mm depth, 58mm bezel.

Image: Gauge Dimensions

4. Package Contents

Each Dynoracing gauge package typically includes the following components, specific items may vary slightly depending on the gauge type purchased:

  • Dynoracing 52mm Gauge Unit (e.g., Boost, Water Temp, Oil Temp, Oil Press, Voltmeter, Air Fuel Ratio, EGT, Tachometer)
  • Wiring Harness
  • Mounting Ring
  • Instruction Manual
  • Specific to certain gauges:
    • Boost/Vacuum Gauge: Boost/Vacuum Sensor, Vacuum Tubing, T-Adapter, Air Filter.
    • Water Temperature Gauge: Water Temperature Sensor.
    • Oil Temperature Gauge: Oil Temperature Sensor.
    • Oil Pressure Gauge: Oil Pressure Sensor.
    • Air Fuel Ratio Gauge: O2 Sensor.
    • Exhaust Gas Temperature Gauge: EGT Sensor.

Example package contents for various gauges:

Package contents for Boost gauge, including gauge, sensor, wiring, tubing, T-adapter, and air filter.

Image: Boost Gauge Package Contents

Package contents for Water Temperature gauge, including gauge, sensor, and wiring.

Image: Water Temperature Gauge Package Contents

Package contents for Oil Temperature gauge, including gauge, sensor, and wiring.

Image: Oil Temperature Gauge Package Contents

Package contents for Oil Pressure gauge, including gauge, sensor, and wiring.

Image: Oil Pressure Gauge Package Contents

Package contents for Voltmeter, including gauge and wiring.

Image: Voltmeter Package Contents

Package contents for Tachometer, including gauge and wiring.

Image: Tachometer Package Contents

Package contents for Air Fuel Ratio gauge, including gauge, O2 sensor, and wiring.

Image: Air Fuel Ratio Gauge Package Contents

Package contents for EGT gauge, including gauge, EGT sensor, and wiring.

Image: EGT Gauge Package Contents

5. Setup and Installation

Professional installation is highly recommended. Ensure the vehicle's power is disconnected before beginning installation.

5.1 Mounting the Gauge

The Dynoracing gauges are designed for flush mounting into a panel or a custom holder. They do not come with a separate stand or bracket. Ensure you have a suitable mounting location with a 52mm diameter opening.

Rear view of the gauge with the mounting ring detached.

Image: Gauge Rear View and Mounting Ring

5.2 Electrical Wiring

Refer to the general wiring diagram below for all gauge types. Each gauge requires a 12V power source (ignition switched) and a ground connection. Specific sensor connections vary by gauge type.

Detailed electrical wiring diagram for Dynoracing gauges, showing connections for Boost/Vacuum, Tachometer, Oil/Water Temperature, Oil Pressure, Air Fuel Ratio, Voltmeter, and Exhaust Gas Temperature gauges.

Image: Electrical Wiring Diagram for Dynoracing Gauges

General Wiring Connections:

  • Red Wire: Connect to a 12V ignition switched power source (+). This ensures the gauge powers on and off with the vehicle's ignition.
  • Black Wire: Connect to vehicle chassis ground (-).

Specific Gauge Wiring:

  • Boost/Vacuum Gauge (Model 6361):
    • Green Wire: Connect to the Boost/Vacuum sensor.
    • Install the Nylon Tubing, T-Adapter, and Air Filter as per standard boost gauge installation practices.
  • Tachometer Gauge (Model 6360):
    • Green Wire: Connect to the RPM signal source (e.g., ignition coil negative, ECU tachometer output).
    • Adjust cylinder settings (S&T switch) if applicable for 4/6/8 cylinder engines.
  • Oil/Water Temperature Gauge (Model 6364):
    • Green Wire: Connect to the temperature sensor.
    • Ensure the temperature sensor (1/8NPT thread) is correctly installed in the appropriate fluid path (oil or water).
  • Oil Pressure Gauge (Model 6366V):
    • Green Wire: Connect to the pressure sensor.
    • Ensure the pressure sensor (1/8NPT thread) is correctly installed in the engine's oil pressure port.
  • Air Fuel Ratio Gauge (Model 6368):
    • Green Wire: Connect to the O2 sensor signal wire (narrowband).
    • This gauge is designed for narrowband O2 sensors.
  • Voltmeter (Model 6367):
    • No additional sensor wire needed beyond Red (12V+) and Black (Ground).
  • Exhaust Gas Temperature Gauge (Model 6369):
    • Orange Wire: Connect to one terminal of the EGT sensor.
    • Green Wire: Connect to the other terminal of the EGT sensor.
    • Ensure the EGT sensor is securely installed in the exhaust manifold.

6. Operation

6.1 Power On/Off

The gauge will power on automatically when the vehicle's ignition is switched on (assuming correct wiring to an ignition-switched 12V source). It will power off when the ignition is turned off.

6.2 Reading the Display

Each gauge features a dual display:

  • Analog Needle: Provides a quick, visual indication of the parameter being measured.
  • Digital Display: Offers a precise numerical reading of the parameter.

6.3 Changing LED Backlight Color

The gauge features an adjustable 7-color LED backlight. To change the color:

  1. Locate the small button on the front lens of the gauge.
  2. Press the button briefly to cycle through the 7 available colors.
  3. Release the button when your desired color is displayed. The gauge will retain this setting until changed again.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the gauge lens and body. Avoid abrasive cleaners or solvents that could damage the display or finish.
  • Sensor Inspection: Periodically check sensor connections and wiring for corrosion or damage. Ensure sensors are securely mounted.
  • Wiring Check: Verify all electrical connections remain secure and free from wear or fraying.

8. Troubleshooting

Problem Possible Cause Solution
Gauge does not power on. No power to red wire, poor ground connection, faulty wiring. Check 12V ignition power source, ensure black wire is securely grounded, inspect wiring for breaks or loose connections.
Incorrect or no reading (for sensor-based gauges). Faulty sensor, incorrect sensor wiring, sensor not properly installed. Verify green wire connection to sensor, ensure sensor is correctly installed and functioning, check for proper sensor type.
LED backlight color does not change. Button malfunction, internal wiring issue. Ensure button is being pressed correctly. If issue persists, contact support.
Tachometer reading is inaccurate. Incorrect cylinder setting, improper signal source. Verify the cylinder setting (S&T switch) matches your engine. Ensure the green wire is connected to a reliable RPM signal.

9. User Tips

  • Ignition Wiring: For consistent operation, connect the gauge's red power wire directly to an ignition-switched 12V source. This ensures the gauge illuminates and operates only when the vehicle is running.
  • Mounting Considerations: These gauges are designed for panel mounting. If you require a different mounting solution (e.g., a pod or stand), you will need to source it separately as the gauges do not include one.
  • Sensor Inclusion: Temperature, oil pressure, EGT, and Air Fuel Ratio gauges come with their respective sensors. The Voltmeter and Tachometer do not require external sensors.
  • Air Fuel Ratio Type: The Air Fuel Ratio gauge is designed for narrowband O2 sensors.

10. Warranty and Support

For any questions, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

CE Certification: This product is CE certified, indicating compliance with European safety, health, and environmental protection requirements.

CE Certificate of Conformity for Dynoracing automobile instruments.

Image: CE Certificate of Conformity

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.