Introduction
Thank you for choosing the BOBLOV IDV007 Mini Camera. This compact and versatile device is designed for high-definition video and audio recording in various scenarios. Please read this manual carefully to understand the camera's features and ensure proper operation.
Product Components
Familiarize yourself with the various parts of your BOBLOV IDV007 Mini Camera:
- Lens
- ON / Video Button
- Audio-recording / Indicator Switch
- Photo / Motion-detection Switch
- TF Card Slot
- USB Port
- Indicator Light
- Reset Hole
- Magnet
- Magnet
- Microphone
- M6 Screw Hole
Setup Guide
1. Charging the Camera
Before first use, fully charge the camera. Connect the camera to a DC 5V--500MAH power source using the provided USB cable via the USB Port (6). The indicator light (7) will show charging status (specific color/behavior not detailed, refer to indicator section if available). A full charge takes approximately 1 hour.
2. Inserting a Memory Card
The camera supports MicroSD / TF cards up to 64GB. Ensure the camera is powered off before inserting or removing the memory card. Gently insert the card into the TF Card Slot (5) until it clicks into place. To remove, push the card in slightly until it springs out.
Note: A memory card is required for recording video and audio. The camera does not have built-in memory.
Operating Instructions
Power On/Off
- Power On: Press and hold the ON / Video Button (2) for a few seconds until the indicator light (7) illuminates.
- Power Off: Press and hold the ON / Video Button (2) for a few seconds until the indicator light (7) turns off.
Video Recording
The camera records in 1080P Full HD (1920x1080) at 30 frames per second, using M-JPEG video encoding. It features a 6-layer glass lens for high-quality images.
- Start Recording: With the camera powered on, press the ON / Video Button (2) once to start video recording. The indicator light (7) will change to indicate recording is in progress.
- Stop Recording: Press the ON / Video Button (2) again to stop recording. The indicator light (7) will revert to standby mode.
- Loop Recording: The camera supports loop recording, automatically overwriting the oldest files when the memory card is full.
- Recording While Charging: Video recording can continue while the camera is connected to a power source for charging.
Audio Recording
The camera can record audio independently for approximately 7 hours on a full charge.
- Start Audio Recording: Toggle the Audio-recording / Indicator Switch (3) to the audio recording position. The indicator light (7) will change to confirm audio recording is active.
- Stop Audio Recording: Toggle the Audio-recording / Indicator Switch (3) back to its original position.
Photo Mode
The camera can capture still images.
- Take Photo: Toggle the Photo / Motion-detection Switch (4) to the photo position and press the ON / Video Button (2) once to capture a photo.
Motion Detection
When motion detection is enabled, the camera will automatically start recording when movement is detected.
- Activate Motion Detection: Toggle the Photo / Motion-detection Switch (4) to the motion detection position. The camera will enter standby mode and begin recording upon detecting motion.
- Deactivate Motion Detection: Toggle the Photo / Motion-detection Switch (4) back to its original position.
Data Transfer
To access recorded files, connect the camera to a computer using the USB cable via the USB Port (6). The camera will appear as a removable disk, allowing you to transfer files. The camera supports high-speed data transmission via USB 2.0 interface.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the camera body. For the lens (1), use a specialized lens cleaning cloth to avoid scratches. Do not use liquid cleaners directly on the camera.
- Storage: Store the camera in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to about 50% every few months.
- Memory Card: Regularly back up important recordings from your MicroSD card to a computer. Periodically format the memory card (after backing up data) to maintain optimal performance and prevent data corruption.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera does not power on. | Low battery; System crash. | Charge the camera fully. If still unresponsive, use a thin object to press the Reset Hole (8) to restart the device. |
| Cannot record video/audio. | No memory card; Memory card full; Memory card error. | Ensure a MicroSD card is inserted. Transfer files to free up space or insert a new card. Format the memory card (after backing up data) or try a different card. |
| Poor video quality. | Dirty lens; Insufficient lighting. | Clean the lens with a soft cloth. Ensure adequate lighting in the recording environment. |
| Computer does not recognize camera. | Faulty USB cable; Driver issue; Camera not in data transfer mode. | Try a different USB cable or USB port on your computer. Ensure the camera is powered on and connected correctly. Restart both the camera and computer. |
Specifications
| Model Number | IDV007 |
| Type | Mini Camera, Body Camera, Dash DVR |
| High Definition Support | 1080P (Full-HD) |
| Video Resolution | 1920x1080HD |
| Video Frame Rate | 30fps |
| Video Format | AVI |
| Video Encoding | M-JPEG |
| Image Proportion | 16:9 |
| Sensor Technology | CMOS |
| Battery Capacity | 560mAh Li-polymer |
| Video Recording Duration | Approx. 3 hours |
| Audio Recording Duration | Approx. 7 hours |
| Charging Voltage | DC 5V--500MAH |
| Interface Type | Micro 5Pin USB (USB 2.0) |
| Memory Card Type | MicroSD / TF (up to 64GB supported) |
| Built-in Memory Size | None |
| Features | Audio Recording, Motion Activated/Detection, Loop Recording |
| Weight | 35g |
| Supported Systems | Windows ME/2000/XP/Vista; Mac OS; Linux |
User Tips
- Video Quality: The camera records in true 1080P Full HD, providing clear and detailed footage. Ensure good lighting conditions for optimal video quality.
- Night Mode: This camera is designed for general recording and does not feature a dedicated "night mode" or infrared (IR) capabilities for recording in complete darkness. Performance in very low light conditions may be limited.
- Mounting: Utilize the integrated back clip for easy attachment to clothing or other surfaces. The camera's lightweight design (35g) makes it comfortable for extended wear.
- Versatile Use: The compact size and features make it suitable for various applications, including personal security, recording meetings, outdoor activities, or as a dashcam.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.