LILYGO TTGO T-Display

Contents

LILYGO® TTGO T-Display ESP32 Development Board User Manual

Model: TTGO T-Display

Brand: LILYGO

1. Introduction

The LILYGO® TTGO T-Display is a compact and versatile development board featuring an ESP32 microcontroller, integrated WiFi and Bluetooth capabilities, and a vibrant 1.14-inch ST7789V IPS LCD. Designed for a wide range of applications, from IoT projects to wearable devices, this module offers robust wireless communication and a clear visual interface. This manual provides essential information for setting up, operating, and maintaining your T-Display board.

Front and back view of the LILYGO TTGO T-Display ESP32 Development Board

Image: Front and back view of the LILYGO TTGO T-Display ESP32 Development Board, highlighting its compact design and integrated display.

2. Specifications

The following table details the technical specifications of the TTGO T-Display board:

T-Display Specifications including MCU, Wireless Connectivity, Programming Platform, Serial chip, Onboard functions, LCD details, and Power Supply.

Image: Detailed specifications for the T-Display module, covering its core components and features.

Feature Description
MCU ESP32 Xtensa dual-core LX6 microprocessor
Wireless Connectivity Wi-Fi 802.11 b/g/n, Bluetooth V4.2+BLE
Programming Platform Arduino-IDE, MicroPython
Serial Chip Options CH9102F, CP2104, CH340K
Flash Memory 4MB or 16MB (version dependent)
Onboard Functions Buttons (I006+I007), Battery power detection
LCD Type 1.14 inch ST7789V IPS LCD
LCD Resolution 135 x 240, 260 ppi
LCD Interface 4-Wire SPI
LCD Working Power 3.3V
Power Supply USB-C / Li-Po Battery (JST GH 1.25mm connector)
Dimensions (WxHxD) 51.52 x 25.04 x 8.54 mm
Weight 7.81g
Product dimensions diagram showing 51.49mm length, 25.09mm width, and pin spacing.

Image: Dimensional drawing of the T-Display board, indicating its physical size and pin layout.

3. Package Contents

Your LILYGO® TTGO T-Display package should include the following items:

Package contents: T-Display module, PH2.54 pins, JST 1.25mm 2P cable.

Image: Visual representation of the package contents, including the T-Display module, pin headers, and a JST cable.

  • 1 x TTGO T-Display Module
  • 2 x PH2.54 Pin Headers (1*12P)
  • 1 x JST 1.25mm 2P Cable

4. Setup Guide

4.1. Pin Diagram

Understanding the pinout is crucial for connecting external components and utilizing the board's full potential. Refer to the diagram below for detailed pin assignments:

Detailed pinout diagram for the T-Display V1.1, showing GPIO, ADC, DAC, I2C, SPI, BAT, RST, TOUCH pins.

Image: Comprehensive pinout diagram for the ESP32 TTGO T-Display V1.1, illustrating GPIO, power, communication, and touch pins.

4.2. Power Supply

The T-Display board can be powered via its USB-C port or a Li-Po battery connected to the JST GH 1.25mm connector. Ensure the power source provides stable 5V for USB or appropriate voltage for the Li-Po battery.

4.3. Driver Installation

Before programming, you may need to install the appropriate USB-to-serial drivers for your computer's operating system. The board uses one of the following chips: CH9102F, CP2104, or CH340K. Drivers can typically be found on the chip manufacturer's website or the LILYGO GitHub repository.

  • For CH9102F/CH340K: Search for 'CH9102F driver' or 'CH340K driver' online.
  • For CP2104: Search for 'CP2104 driver' online.

After installation, connect the board to your computer using a USB-C cable. The device should be recognized as a serial port.

5. Operating Instructions

5.1. Programming Environment

The LILYGO TTGO T-Display is compatible with popular development environments such as Arduino-IDE and MicroPython. You can find example code and libraries on the official LILYGO GitHub repository to get started.

5.2. Uploading Code

  1. Connect the T-Display board to your computer via the USB-C port.
  2. Open your chosen IDE (e.g., Arduino IDE).
  3. Select the correct board model (ESP32 Dev Module or similar) and the serial port corresponding to your T-Display.
  4. Write or load your code.
  5. Click the upload button to flash the firmware to the board.

5.3. Display Interaction

The 1.14-inch ST7789V IPS LCD provides a visual output for your projects. The board also includes two user-programmable buttons (connected to I006 and I007) for user input.

5.4. Battery Monitoring

The board features onboard battery power detection, allowing your applications to monitor the connected Li-Po battery's charge level.

6. Maintenance

  • Handling: Handle the board with care to avoid physical damage to components or the display.
  • Environment: Keep the board in a dry environment and avoid exposure to extreme temperatures or humidity.
  • Cleaning: Use a soft, dry cloth to clean the board. Avoid using liquids or harsh chemicals.
  • Firmware Updates: Periodically check the LILYGO GitHub repository for firmware updates and bug fixes to ensure optimal performance.

7. Troubleshooting

7.1. USB Not Recognized

  • Driver Check: Ensure that the correct USB-to-serial drivers (CH9102F, CP2104, or CH340K) are installed on your computer.
  • Cable Orientation: Some USB-C cables or ports might be sensitive to orientation. Try flipping the USB-C connector or using a different cable.
  • Different Port/Cable: Test with a different USB port on your computer or a different USB-C data cable.

7.2. Incorrect Pin Voltage

If specific pins (e.g., SDA/SCL on pins 21/22) exhibit unexpected voltage levels (e.g., 1.2V instead of 3.3V), this may indicate a hardware issue. Verify your wiring and code. If the problem persists, contact LILYGO support.

7.3. Wi-Fi Connectivity Issues

  • Firmware Configuration: Double-check your Wi-Fi credentials (SSID, password) in your code.
  • Signal Strength: Ensure the board is within range of your Wi-Fi access point.
  • Interference: Minimize potential interference from other 2.4GHz devices.

8. User Tips

  • Easy Flashing: Users have reported successfully flashing custom firmware like Jade Wallet and Nerdminer by simply connecting the board to a laptop's USB-C port and initiating the flash process.
  • Protective Packaging: The board often arrives in a small protective box, which is useful for safe transport and storage.
  • Community Resources: The LILYGO GitHub repository is an excellent resource for sample code, libraries, and community discussions.

9. Certifications

The LILYGO® TTGO T-Display board has successfully passed the following certifications:

Certifications for CE, FCC, MIC, and UKCA.

Image: Display of CE, FCC, MIC, and UKCA certification logos, indicating compliance with various regulatory standards.

  • CE: Conforms to European health, safety, and environmental protection standards.
  • FCC: Complies with Federal Communications Commission regulations for electronic devices.
  • MIC: Meets Japanese radio equipment standards (TELEC Certification).
  • UKCA: United Kingdom Conformity Assessed marking for products placed on the market in Great Britain.

10. Warranty and Support

For technical support, documentation, sample code, and community resources, please refer to the official LILYGO GitHub repository:

LILYGO TTGO T-Display GitHub Repository

GitHub link image for LILYGO TTGO T-Display

Image: A banner indicating the GitHub repository for the TTGO T-Display, where users can find code samples and support.

LILYGO P-IOT is committed to providing quality products. For specific warranty information or issues not covered in this manual, please contact the seller directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.