Introduction
Thank you for purchasing the Lumintop B01 Rechargeable LED Flashlight. This manual provides detailed instructions for the safe and efficient use of your new flashlight. The B01 is a versatile lighting tool designed for various applications, including city walks, camping, and work, featuring an anti-glare design and convenient USB Type-C recharging.
Features
- Utilizes Cree XP-L HD LED with 50,000 hours lifetime.
- Powered by one 21700 Li-ion battery (battery excluded in some options).
- 5 modes plus Strobe and SOS with a max 900 lumens output.
- Tapered surface reflector designed with German STVZO standard, reducing glare to oncoming people and traffic.
- USB Type-C rechargeable with charging indicator, max charging current up to 2A.
- Reverse polarity protection protects from improper battery installation.
- One side switch operation for fast and convenient control.
- Lock-out function to prevent accidental activations.
- Made of aircraft-grade aluminum alloy with Type III HA finish.
- Multifunctionality to serve as a bicycle light and a handheld flashlight.
- IP68 waterproof rating, submersible up to 2 meters.
- Compact size: 37*25.4*115mm.
- Lightweight: ~101g (excluding battery).
Specifications
| Parameter | Value |
|---|---|
| Light Source | Cree XP-L HD LED |
| Output (Eco) | 13 Lumens |
| Output (Low) | 120 Lumens |
| Output (Med) | 330 Lumens |
| Output (High) | 600 Lumens |
| Output (Turbo) | 900 Lumens |
| Output (Strobe/SOS) | 600 Lumens |
| Runtime (Eco) | 6 Days |
| Runtime (Low) | 20 Hours |
| Runtime (Med) | 6 Hours 30 Minutes |
| Runtime (High) | 3 Hours |
| Runtime (Turbo) | 5 Minutes + 2 Hours 40 Minutes* |
| Lighting Distance | 216m (Max) |
| Light Intensity | 11700cd (Max) |
| Impact Resistant | 1.5m |
| Waterproof Rating | IPX-8, underwater 2m |
| Power | 9W |
| Battery Type | 21700 Li-ion (excluded) |
| Dimensions | 37*25.4*115mm |
| Net Weight | ~101g (battery excluded) |
| Focal Length | Non-adjustable |
| Certification | CCC, CE, ROHS |
| Body Material | Aluminum |
| Zoom | No |
*Note: The above approximate data are lab-tested using a 5000mAh 21700 Li-ion battery. It may vary due to environmental differences and batteries. The runtime on Turbo is accumulated due to over-heat protection.

Setup
Battery Installation
- Unscrew the tail cap of the flashlight.
- Insert one 21700 Li-ion battery with the positive (+) end facing towards the head of the flashlight.
- Screw the tail cap back on tightly.
Note: Ensure correct battery polarity to prevent damage to the flashlight. An electronic reverse polarity protection is built-in, but proper installation is always recommended.
Bicycle Light Installation

- Attach the high-quality bicycle light bracket to your bike's handlebar. The bracket is designed for easy installation and can accommodate diameters from 15mm to 42mm.
- Slide the flashlight into the bracket until it clicks securely into place.
- Adjust the angle of the flashlight left or right according to your usage habits to ensure optimal illumination and anti-glare performance.
Operating Instructions

- ON/OFF: One click of the switch to turn the flashlight ON or OFF.
- Output Change: From the ON state, press and hold the switch to ramp the output through Low → Med → High. Release the button to select the desired output. The flashlight has a mode memory function (excluding Turbo, Strobe, and SOS).
- Turbo: Two quick clicks on the switch to activate Turbo mode.
- Strobe/SOS: Three quick clicks on the switch to enter Strobe mode. Another three quick clicks will switch to SOS mode.
- Eco Mode: From the OFF state, press and hold the switch to activate Eco mode.
- Lock-out/Unlock: From the OFF state, four quick clicks on the switch will enter Lock-out mode. In Lock-out mode, pressing the switch will momentarily activate a low output, which turns off upon release. To unlock, perform another four quick clicks or loosen the threads of the tail cap to cut off power.
- Switch Back-lit Light ON/OFF: From the OFF state, five quick clicks on the switch will toggle the button's back-lit light ON or OFF.
Mode Memory
The flashlight will memorize the last used general output level (excluding Turbo, Strobe, and SOS) when turned off, and will recall it the next time you turn it on.
Over-heat Protection
When operating in Turbo mode for an extended period, the flashlight will accumulate significant heat. To ensure comfortable use and protect internal components, the light will automatically downshift to a lower output level if the head temperature exceeds 55°C. If the temperature drops below 55°C, the output can be manually reset to a higher level if Turbo is needed.
Battery Usage & Charging
Battery Recommendations
- Use only reputable 21700 Li-ion cells from known origins, such as Samsung, Panasonic/Sanyo, Sony, or LG.
- Remove or recharge the battery when the low voltage indication is given by the flashlight.
- Always treat Li-ion cells with respect and properly dispose of damaged cells, as their high energy density can create hazardous conditions if short-circuited or damaged.
USB Type-C Charging

The flashlight is rechargeable via its built-in USB Type-C port. Open the USB dust cover, insert the charging cable, and connect it to a power source. The maximum charging current is 2A; a 5V/2A adapter is recommended.
During charging, the indicator light inside the switch will flash green. Once fully charged, the indicator will turn solid green. In standby mode, the indicator remains green.
Maintenance
General Care
- Clean the flashlight regularly with a soft cloth.
- Avoid dropping or subjecting the flashlight to strong impacts.
- Do not disassemble or modify the flashlight, as this will void the warranty and may cause damage.
O-Ring Maintenance
- Keep the waterproof O-rings free from dirt and scratches.
- Periodically lubricate the O-rings with silicone grease to maintain their integrity and ensure waterproof performance.
Storage
- If the flashlight will not be used for a long period, remove the battery to prevent damage from potential battery leakage.
- To avoid accidental activation during storage, loosen the tail cap slightly to cut off the circuit.

Troubleshooting
- Flashlight not turning on: Check if the battery is inserted correctly with the positive end facing the head. Ensure the tail cap is screwed on tightly. If the flashlight is in Lock-out mode, unlock it by performing four quick clicks on the switch.
- Battery draining quickly: While the button indicator light consumes minimal power, a faulty battery or prolonged use of high modes can lead to faster discharge. Ensure you are using a high-quality battery.
- Flashlight overheating: The B01 has an automatic over-heat protection that downshifts output when the temperature exceeds 55°C. This is normal behavior to protect the device.
- Light output issues (e.g., not reaching maximum brightness): Ensure the battery is fully charged and is a reputable 21700 Li-ion cell. If using an 18650 battery, Turbo mode might trigger the battery's protection board due to load.
User Tips
- The B01's anti-glare beam pattern is excellent for road cycling, providing a 'car-like' beam that illuminates the path without blinding oncoming traffic or pedestrians.
- The flashlight can operate while charging from a power bank, offering continuous light even if the internal battery is low or absent.
- For optimal performance and safety, always use high-quality, reputable 21700 Li-ion batteries.
- The button indicator light has a negligible impact on battery life over short periods, but for very long-term storage, it's best to remove the battery or engage the lock-out function.
- Spare O-rings are provided to maintain the flashlight's water resistance in case the original ones are damaged or worn.
Safety Warnings
Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or property.
- Do not shine the light directly into anyone's eyes, as this may cause temporary vision impairment or injury.
- Ensure correct battery polarity (+/-) when installing batteries.
- Do not use the flashlight near fire or flammable materials.
- Avoid strong impacts or dropping the flashlight.
- Do not expose the flashlight to direct sunlight or high temperatures (e.g., inside a hot car).
- Do not disassemble, modify, or attempt to repair the flashlight yourself.
- Keep the USB cap covered to maintain waterproof integrity.
- For long-term storage, remove the battery from the flashlight.
- To prevent accidental activation, loosen the tail cap or engage the lock-out function when not in use.
Warranty & Support
Warranty Policy
- 30 Days of Purchase: Free repair or replacement for manufacturing defects.
- 5 Years of Purchase: Lumintop will repair products free of charge if problems arise with normal use. (Note: Products with built-in batteries have a 2-year warranty, and accessories have a 1-year warranty).
- Lifetime Warranty: If repair is required after the guarantee period, charges for parts will apply. Labor fees are not charged.
This warranty does not cover normal wear and tear, improper maintenance, abuse, force majeure damage, or defects caused by human factors.
For a comprehensive user manual in PDF format, please refer to the official document: Lumintop B01 User Manual (PDF)
Contact Information
LUMINTOP TECHNOLOGY CO., LTDAddress: 11th Floor, Block B, Tianhengda Industrial Park, No.2 Chengxin Road, Longgang District, Shenzhen, China
Web: www.lumintop.com
Tel: +86-755-88838666
E-mail: service@lumintop.com