lilygo T-Call V1.4 SIM800L

Contents

LILYGO TTGO T-Call V1.4 SIM800L Development Board User Manual

Model: T-Call V1.4 SIM800L

1. Introduction

The LILYGO TTGO T-Call V1.4 SIM800L Development Board is a versatile wireless module integrating an ESP32 microcontroller with a SIM800L GSM/GPRS module. This board provides WiFi, Bluetooth, and cellular communication capabilities, making it ideal for IoT projects requiring internet connectivity and SMS/voice functionality. It is designed for ease of use with platforms like the Arduino IDE.

2. Safety Information

  • Handle the board with care to avoid electrostatic discharge.
  • Ensure correct power supply voltage (5V via USB-C or LiPo battery) to prevent damage.
  • Do not expose the board to moisture or extreme temperatures.
  • Disconnect power before making any physical connections or disconnections.
  • Keep out of reach of children.

3. Package Contents

The standard package for the LILYGO TTGO T-Call V1.4 SIM800L Development Board typically includes the following items:

  • LILYGO TTGO T-Call V1.4 SIM800L Development Board
  • SIM Antenna
  • Pin Headers (for soldering, if 'Unsoldered Pins' version)
  • Battery Connector Cable (JST)
Package contents of LILYGO TTGO T-Call V1.4 SIM800L Development Board
Figure 1: Typical package contents including the board, SIM antenna, pin headers, and battery cable.

4. Product Overview

The T-Call V1.4 board combines an ESP32-WROVER-B module (featuring ESP32 for WiFi/Bluetooth) and a SIM800L module for GSM/GPRS communication. It includes a USB-C port for power and data, a SIM card slot, and connectors for a GSM antenna and a LiPo battery.

Front and back view of LILYGO TTGO T-Call V1.4 SIM800L Development Board with component labels
Figure 2: Front and back view of the T-Call V1.4 board, showing key components and pinouts.
Angled view of LILYGO TTGO T-Call V1.4 SIM800L Development Board, showing USB-C port
Figure 3: Angled view highlighting the USB-C port and pin headers.
Angled view of LILYGO TTGO T-Call V1.4 SIM800L Development Board, highlighting SIM card slot
Figure 4: Angled view highlighting the SIM card slot and pin headers.

5. Setup

5.1 Hardware Connection

  1. **Insert SIM Card**: Carefully insert a 2G-compatible Nano SIM card into the SIM card slot on the board. Ensure it is correctly oriented.
  2. **Connect SIM Antenna**: Attach the provided SIM antenna to the IPEX connector labeled for the SIM800L module. This is crucial for cellular communication.
  3. **Powering the Board**:
    • **USB-C**: Connect the board to a computer or a 5V USB power adapter using a USB-C cable.
    • **Battery**: Connect a compatible 3.7V LiPo battery to the JST connector on the board. The board includes charging circuitry for the battery.
  4. **Connecting to Computer**: Use the USB-C cable to connect the board to your computer for programming and serial communication.
Top view of LILYGO TTGO T-Call V1.4 SIM800L Development Board with SIM antenna connected
Figure 5: Top view of the board with the SIM antenna connected.
Bottom view of LILYGO TTGO T-Call V1.4 SIM800L Development Board with SIM antenna connected
Figure 6: Bottom view of the board with the SIM antenna connected.

5.2 Software Setup

  1. **Install Arduino IDE**: Download and install the Arduino IDE from the official website.
  2. **Add ESP32 Board Support**: In the Arduino IDE, go to File > Preferences and add the ESP32 board manager URL. Then, go to Tools > Board > Boards Manager and install the 'ESP32' platform.
  3. **Select Board**: From Tools > Board, select the appropriate ESP32 board (e.g., 'ESP32 Dev Module' or 'ESP32 Wrover Module').
  4. **Install Drivers**: If your computer does not recognize the board, you may need to install USB-to-Serial drivers (e.g., CP2104 or CH9102, depending on the version of your board).
  5. **Install Libraries**: Install necessary libraries for SIM800L communication (e.g., TinyGSM) and any other specific functionalities you plan to use.

6. Operating Instructions

6.1 Basic GSM/GPRS Operations

The SIM800L module allows for cellular communication. You can program the ESP32 to:

  • **Send/Receive SMS**: Use AT commands or a library like TinyGSM to send and receive text messages.
  • **Make/Receive Calls**: The SIM800L supports voice calls. Microphones and speakers are typically connected to the SIM800L module's audio pins.
  • **GPRS Data**: Establish GPRS connections for internet access over the cellular network.

6.2 WiFi and Bluetooth Operations

The integrated ESP32 module provides standard WiFi and Bluetooth capabilities:

  • **WiFi**: Connect to existing WiFi networks or create an access point.
  • **Bluetooth**: Establish Bluetooth Low Energy (BLE) or classic Bluetooth connections for short-range communication.

7. Maintenance

  • Keep the board clean and free from dust and debris.
  • Store in a dry, cool environment.
  • Regularly check connections for looseness or corrosion.
  • Update firmware and libraries as needed for optimal performance and security.

8. Troubleshooting

  • **Board not powering on**: Check USB-C cable and power source. If using a battery, ensure it is charged and correctly connected.
  • **SIM card not detected**: Verify SIM card insertion and ensure it is a 2G-compatible Nano SIM.
  • **No cellular signal**: Ensure the SIM antenna is securely connected and you are in an area with 2G network coverage.
  • **Programming issues**: Double-check board selection in Arduino IDE, port selection, and driver installation.
  • **Brief reboot when switching power sources**: This can occur due to the boost converter's switchover time. Ensure a stable power supply or implement software handling for power transitions.
  • **No external WiFi antenna connector**: The board uses an onboard antenna for WiFi/Bluetooth. There is no external IPEX connector for WiFi.

9. Specifications

FeatureDescription
Product NameT-Call V1.4
Model NumberT-Call V1.4 SIM800L
Brand Namelilygo
Master ChipESP32
ChipsetESP32
Wireless ConnectivityWiFi, Bluetooth, GSM/GPRS (SIM800L)
Dimensions (WxHxD)78.83mm x 28.92mm x 8.06mm
Weight11.77g
Compatible Audio & Video Equipment StylePlayer, Professional Audio Equipment
SIM800L 4MB CP2104 VariantH317
SIM800L 4MB CH9102 VariantQ103
SIM800L 8MB CH9102 VariantQ103-01
SIM800H 4MB VariantQ336
SIM800H 8MB VariantQ390
OriginMainland China
CertificationNONE

10. User Tips

  • **Battery Power**: The board can be powered by a rechargeable internal battery (LiPo) connected via the JST connector.
  • **SMS Control**: The SIM800L module supports SMS functionality and can be controlled via SMS with appropriate software.
  • **Arduino IDE**: When using the Arduino IDE, select an 'ESP32 Core' board for programming.
  • **4G Support**: Note that this board does not support 4G networks; it is designed for 2G GSM/GPRS.
  • **MicroPython**: There is no dedicated MicroPython module present for this board.
  • **WiFi Antenna**: The board utilizes an integrated antenna for WiFi and Bluetooth. An external IPEX connector is provided only for the GSM/GPRS antenna.
  • **Audio Connections**: Microphones and speakers are typically connected directly to the SIM800L module's audio pins, not the ESP32.

11. Warranty and Support

For warranty information, technical support, and additional resources, please refer to the official LILYGO website or contact your retailer. Documentation, example code, and community forums are often available to assist with development and troubleshooting.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.