KEYDIY KD DATA Collector

Contents

KEYDIY KD DATA Collector Instruction Manual

Model: KD DATA Collector

Brand: KEYDIY

Introduction

The KEYDIY KD DATA Collector is an essential accessory designed to work seamlessly with the KEYDIY KD-X2 device. Its primary function is to easily and efficiently collect data directly from a vehicle, which is then utilized by the KD-X2 for the precise copying of key chips. This compact and robust device enhances the capabilities of your KD-X2, making key programming tasks more streamlined.

1. Setup

1.1 Unpacking

  • Carefully remove the KD DATA Collector from its packaging.
  • Inspect the device for any visible damage. If any damage is found, contact your supplier immediately.

1.2 Connecting to KD-X2

The KD DATA Collector is designed for direct connection to your KEYDIY KD-X2 device.

  1. Locate the white connector on the KD DATA Collector.
  2. Connect this connector to the designated port on your KEYDIY KD-X2 device. Ensure a firm and secure connection.
KEYDIY KD DATA Collector device
Front view of the KEYDIY KD DATA Collector, showing its clear plastic casing, internal circuit board, and a white connector for attachment to the KD-X2 device.

1.3 Initial Connection to Vehicle

The KD DATA Collector facilitates data acquisition from your vehicle's system. Specific connection methods to the vehicle may vary depending on the vehicle model and the capabilities of your KD-X2 device. Always refer to your KD-X2 manual for detailed instructions on how to connect to a vehicle's diagnostic port or immobilizer system for data collection.

2. Operating Instructions

2.1 Data Collection Process

Follow these steps to collect data from a vehicle using the KD DATA Collector and your KD-X2 device:

  1. Ensure the KD DATA Collector is securely connected to your KD-X2 device and, subsequently, to the vehicle as per the KD-X2 manual.
  2. Power on your KD-X2 device.
  3. Navigate through the KD-X2 menu to select the appropriate data collection or chip copying function.
  4. Follow the on-screen prompts provided by the KD-X2 to initiate the data collection from the vehicle. The KD DATA Collector will actively facilitate this process.
  5. Once data collection is successfully completed, the KD-X2 will typically provide a confirmation message. You can then proceed with the key chip copying procedure as outlined in your KD-X2 manual.

2.2 Important Notes

  • Always ensure the vehicle's ignition is in the correct position (e.g., ON or ACC) as specified by the KD-X2 for successful data collection.
  • Avoid disconnecting the KD DATA Collector or the KD-X2 device during the data collection process to prevent potential data corruption or system errors.

3. Maintenance

To ensure the longevity and optimal performance of your KD DATA Collector, follow these simple maintenance guidelines:

  • Keep the KD DATA Collector clean and free from dust, dirt, and debris. Use a soft, dry cloth for cleaning.
  • Store the device in a cool, dry place, away from direct sunlight, excessive moisture, and extreme temperatures.
  • Avoid dropping the device or subjecting it to strong impacts, which could damage internal components.
  • Do not attempt to open the casing of the KD DATA Collector. Doing so may void any potential warranty and could lead to irreparable damage to the device.

4. Troubleshooting

4.1 Device Not Responding

  • Check all physical connections between the KD DATA Collector and the KD-X2 device to ensure they are secure.
  • Verify that the KD-X2 device is powered on and functioning correctly.
  • If applicable, ensure the vehicle's power supply is stable and sufficient for the operation.

4.2 Data Collection Failure

  • Confirm that the KD DATA Collector is properly connected to the vehicle's system as instructed by the KD-X2 manual.
  • Ensure the vehicle's ignition is in the correct state (e.g., ON, ACC) required for data acquisition.
  • Consult the KD-X2 device's display for any specific error messages or diagnostic codes, and refer to the KD-X2 manual for their interpretation.

5. Specifications

Feature Detail
Model NameKD DATA Collector
Item TypeAccessory for Key Programming
MaterialPlastic and Metal
CertificationCE
Voltage12V
Power (W)8W
Hardware VersionNewest
Software VersionNewest (Compatibility with KD-X2 software)
Software UpdateNo (Device itself does not require software updates)
Batteries IncludedNo
Item Weight0.01 kg
Item Dimensions (L x W x H)5cm x 1cm x 2cm

6. User Tips

  • Flexible Placement: The KD DATA Collector is designed to be compact and can be positioned conveniently during use. Its internal antenna allows for some flexibility in placement, potentially keeping it out of the immediate workspace while still functioning effectively.
  • Consult KD-X2 Manual: For specific vehicle connection procedures, advanced functions, and detailed error code explanations, always refer to the comprehensive instruction manual provided with your KEYDIY KD-X2 device.

7. Warranty and Support

For information regarding product warranty, technical support, or service inquiries, please contact your original point of purchase or the official KEYDIY distributor. It is recommended to retain your purchase receipt or proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.