svbony SV121

Contents

Svbony SV121 Laser Collimator User Manual

Model: SV121 | Brand: Svbony

Product Description

The Svbony SV121 is a new-generation laser collimator designed for reflector and refractor telescopes. It features a 45-degree aluminum crosshair plate and a three-level light intensity control, simplifying visual alignment. Collimation involves aligning the internal components of an optical system, such as a telescope, by adjusting the tilt and position of mirrors and lenses to achieve optimal focus. Factors like vibrations or temperature changes can cause misalignment, leading to blurry or unviewable images. Regular collimation before each use, or when images appear blurry, ensures the best possible viewing experience.

An insulating pad is attached to the bottom of the battery compartment; please remove it before use.

Svbony SV121 Laser Collimator

Svbony SV121 Laser Collimator

Key Features:

  • Upgraded Triangular Screw Design: Features a triangular screw structure that precisely locks the optical path, ensuring coaxial laser alignment and improved calibration accuracy.
  • Enhanced Calibration Accuracy: Utilizes a 45° aluminum scale plate and laser reflection for precise mirror alignment and tilt checks, resulting in rounder, clearer laser spots and more efficient telescope calibration.
  • Dual Seals & Micro-Angle Compensation: Equipped with dual 1.5mm high-elastic rubber rings and a micro-angle end design to absorb manufacturing tolerances (0.1–0.2mm). This ensures smooth insertion and rock-solid fixation for consistent measurements.
  • 3-Level Laser Brightness Adjustment: User-friendly operation with three adjustable laser brightness levels for various observation conditions, eliminating unnecessary power settings.
  • Stable 1.25" Interface: The dual rubber rings compensate for manufacturing tolerances, eliminate assembly gaps, and maintain coaxial alignment for reliable and precise telescope calibration.
  • Durable All-Metal Construction: Features a full-metal body with a sandblasted and anodized finish, providing anti-corrosion and wear-resistant durability for long-term use.

Setup & Operating Instructions

Follow these steps to properly set up and operate your Svbony SV121 Laser Collimator:

  1. Prepare the Telescope: Ensure the secondary mirror is directly beneath the focuser. You should be able to see the reflections of the three primary mirror support clips on the secondary mirror.
  2. Insert Collimator: Insert the laser collimator into the focuser with its window facing the primary-mirror end of the telescope.
  3. Select Brightness: Rotate the knob on the bottom of the laser to select the appropriate brightness level (1, 2, or 3).
  4. Check Laser Beam Path: Wave your hand in front of the telescope to confirm that the laser beam can exit unobstructed without striking the secondary mirror. Simultaneously, look through the side window of the laser collimator and verify that the beam returns to the exact front center of the laser.
  5. Adjust Primary Mirror: Adjust screws 1, 2, or 3 (alone or in combination) until the laser dot sits precisely in the center of the primary mirror's marked spot.
  6. Fine-Tune Alignment: If the returning beam is not parallel to its origin, you will need to adjust the collimation screws on the primary mirror.
  7. Confirm with Star Test: Finally, perform a star test to confirm alignment.

Video: Demonstrating the SV121 Laser Collimator features and usage.

Operating Instructions: Secondary Align

Operating Instructions: Secondary Align

Operating Instructions: Brightness & Beam Check

Operating Instructions: Brightness & Beam Check

Operating Instructions: Adjust Secondary

Operating Instructions: Adjust Secondary

Operating Instructions: Primary & Star Test

Operating Instructions: Primary & Star Test

Maintenance

  • Battery Care: Do not place the battery cell near heaters or leave it in direct sunlight. Elevated temperatures shorten battery life and reduce performance. Store the battery in a cool, shaded place.
  • Contamination: Use of the collimator is prohibited in dusty, smoky, or metal-debris-laden environments (e.g., laser-cutting areas) or where fibrous impurities are present. Particles settling on optical surfaces can lower reflection/transmission efficiency, waste beam energy, and may be burned into the coatings by focused laser light, causing permanent damage.
  • Annual Inspection: Have the unit inspected once a year to maintain performance and battery safety.

Troubleshooting

  • Misalignment: If the returning laser beam is not parallel to its origin, you will need to adjust the collimation screws on the primary mirror.
  • Electromagnetic Interference (EMI): Avoid strong EM fields (high-voltage gear, large VFD cabinets, RF generators) as interference can destabilize the laser source (power fluctuations, wavelength drift) and degrade collimation accuracy. If interference occurs, try the following:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.

Specifications

FeatureSpecification
Overall DimensionsΦ32.5 mm × 107 mm
Weight80 g
Insertable Barrel Size1.25 inches (Φ31.7 mm) × 24 mm
Wavelength635-655 nm
Beam FocusSmallest spot at 3 m
Battery TypeCR2032 primary lithium-manganese coin cell
Battery Weight≈3 g
Battery Nominal Voltage3.0 V
Battery Capacity210 mAh
Min Average Battery Duration19h
Field of View58 degrees
Model NameCross calibration eyepiece
TypeMonocular
OriginMainland China

Package Includes:

  • Laser Collimator × 1
  • Storage Box × 1
  • User Manual × 1

Safety Information

  • Laser Safety: Never look directly into the laser beam; permanent eye injury can result. Avoid prolonged skin exposure to the beam; rashes and/or burns may occur.
  • RF Energy Exposure: Before using this device, read this guide for important operating instructions for safe usage and compliance with applicable national and international standards. Keep this instruction for future reference. User instructions should accompany the device when transferred to other users.
  • Battery Safety:
    • WARNING: KEEP NEW OR OLD USED BATTERIES OUT OF REACH OF CHILDREN. Even used batteries may cause severe injury or death.
    • Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
    • In the event of a battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice immediately.
    • Turn off your device before removing or installing a battery. Store spare batteries securely. Dispose of used batteries immediately and safely.
    • Batteries should be removed from the appliance when not being used for long periods (months). They should be enclosed in special protective packaging (such as sealed plastic bags) to protect them from condensation.
    • Exhausted batteries are to be removed from the equipment.
    • Do not dismantle, open, or shred batteries. Batteries should be dismantled only by trained people.
    • Disposal of a battery into fire, or a hot oven, or mechanically crushing or cutting of a battery can result in explosion.
    • Non-rechargeable batteries are not to be recharged.
    • Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cd; Ni-MH) batteries.
    • Different types of batteries or new and used old batteries are not to be mixed. Do not mix batteries of different manufacturers, capacities, or sizes.
    • Batteries must be inserted with the correct polarity (+ and -). Replacement of a battery with an incorrect type can defeat the safeguard, risking fire or explosion.
    • Always completely secure the battery compartment. If it does not close securely, stop using the product, remove the batteries, and keep them away from children.
    • Never put batteries in your mouth. Swallowing may lead to serious injury or death. If you suspect a battery has been swallowed or placed inside any part of the body, seek immediate medical attention and contact a local poison control center.
    • Do not force discharge, recharge, disassemble, heat above 60 °C, or incinerate. Doing so may result in injury due to venting, leakage, or explosion resulting in chemical burns.
  • WARNING: INGESTION HAZARD - Button Cell Battery: This product contains a button cell or coin battery. Death or serious injury can occur if ingested. A swallowed button cell or coin battery can cause internal chemical burns in as little as 2 hours. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.
  • WARNING: CHOKING HAZARD - Small Parts: Not suitable for children under 3 years old.

User Tips

  • Always check the initial optical axis alignment of the laser collimator upon receipt to ensure it is in good working order.
  • The Svbony SV121 Laser Collimator is highly useful for aligning optics in various types of telescopes, including Newtonian reflectors.
  • While the laser collimator provides excellent initial alignment, it is highly recommended to perform a star test afterward for the most precise and accurate collimation of your telescope.

Warranty & Support

Most new products carry a two-year manufacturer's warranty from the date of purchase.

Warranty and After-Sales Service:

  • Contact the seller where you purchased the product.
  • Products can be repaired by an authorized local repair center.
  • For warranty service, you will need to provide a receipt or proof of purchase from the actual seller for verification.

Exclusions from Warranty Coverage:

  • Damage to the product caused by accident.
  • Misuse or abuse of the product, or damage resulting from unauthorized alterations or repairs.
  • If the serial number has been altered, defaced, or removed.

Additional Resources:

  • For multi-language user manuals, please consult customer service or scan the QR code provided in the original manual.
  • For a list of Svbony-approved accessories, visit www.svbony.com.
  • For the full text of the EU Declaration of Conformity, visit www.svbony.com.
  • For support inquiries, you may also contact info@svbony.com.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.