Vgate VLinker BM+

Contents

Vgate vLinker BM+ ELM327 V2.2 Bluetooth/WiFi OBD2 Car Diagnostic Tool

User Manual

1. Introduction

The Vgate vLinker BM+ is a professional-grade multi-system diagnostic tool designed for BMW models and other OBD2 compliant vehicles. It transforms your smartphone (iOS or Android) or Windows PC into a powerful diagnostic scanner. This device is perfectly compatible with popular applications like BimmerCode and BimmerLink, offering extensive diagnostic and coding capabilities.

The vLinker BM+ is available in three versions:

  • Vgate Vlinker BM V3.0 Bluetooth: For Android Phones.
  • Vgate Vlinker BM+ V4.0 Bluetooth: For Android phones and iPhones.
  • Vgate Vlinker BM WIFI: For Android Phones and iPhones.

2. Supported Vehicles

The Vgate vLinker BM+ is specifically designed for BMW models and supports a wide range of other OBD2 compliant vehicles.

2.1. Supported BMW Models

The vLinker BM+ supports BMW vehicles across various series, including G, E, F, I, and R Series. Specific models include:

  • BMW 1 Series: F20, F21
  • BMW 2 Series: F22, F23, F87, Active Tourer F45, Gran Tourer F46
  • BMW 3 Series: F30, F31, F34, F35, F80
  • BMW 4 Series: F32, F33, F36, F82, F83
  • BMW 5 Series: F07, F10, F11, F18, F90, G30, G31
  • BMW 6 Series: F06, F12, F13
  • BMW 7 Series: F01, F02, F03, F04, G11
  • BMW X1: F48
  • BMW X2: F39
  • BMW X3: F25, G01
  • BMW X4: F26
  • BMW X5: F15, F85
  • BMW X6: F16, F86
  • BMW i3, i8
  • Mini: F54, F55, F56, F57, F60
Vgate vLinker BM+ Supported BMW Models
Figure 1: Supported BMW Models (G, E, F, I, R Series)

2.2. General OBD2 Vehicle Coverage

The vLinker BM+ supports most OBD2 standard protocols, covering approximately 99% of OBDII cars on the market:

  • American Cars (including Brazil): Standard OBD2, released from 2001 onwards. Compatible with Chrysler, Ford, GM, Jeep.
  • European Cars: Standard OBD2, released from 2004 onwards. Compatible with Alfa Romeo, SAAB, Acura, Opel, Audi, Seat, Peugeot, Renault, Bentley, Skoda, Daewoo, Benz, Daihatsu, Land Rover, BMW, Vauxhall, Citroen, Volvo, Fiat, VW, Ford, Jaguar.
  • Asian Cars (including Australia): Japanese cars with standard OBD2, released from 2006 onwards. Compatible with KIA, Isuzu, Honda, Mitsubishi, Hyundai, Dacia, Lexus, Mazda, Nissan, Subaru, Suzuki, Toyota. Chinese cars with standard OBD2, released from 2011 onwards. Compatible with BYD, Chery, Geely, Great Wall, Karry.
  • Russian Cars: Specific models like Ssangyong Actyon (2007-2017), Korando (2013-2017), Kyron (2007-2017), Rexton (2007/2011-2017), Rodius (2007-2017), LADA Niva (2011-2017), Priora (2008-2017).
Vgate vLinker BM+ Supported Car Models 1996-NOW
Figure 2: General Vehicle Coverage (1996-NOW)

3. Features and Functions

  • Read/Clear Diagnostic Trouble Codes (DTCs)
  • Monitor Engine RPM
  • Module Reset
  • Module Activation
  • Remote Control functions
  • Regeneration processes
  • Automatic sleep/start functionality
  • Battery Tester
Vgate vLinker BM+ Functions
Figure 3: Vgate vLinker BM+ Key Functions

3.2. Key Advantages

  • 100% Original Adapter: Compatible with over 95% of world car models.
  • Perfect BimmerCode/BimmerLink Compatibility: Professional ELM327 functionality.
  • Wide Software Support: Supports almost all ELM327, ELM329, and OBDLINK adapter software.
  • BMW Specific Features: Supports BMW adjustment and programming.
  • Extensive Protocol Support: Includes OBD2 Standard Protocols and additional protocols.
  • Fully Automatic Operation: Simplifies usage.
  • Automatic Sleep/Start: Efficient power management.
Vgate vLinker BM+ Original Adapter Features
Figure 4: Vgate vLinker BM+ Original Adapter Features

3.3. Supported Applications

The vLinker BM+ is recommended by BimmerCode and BimmerLink APP and supports a variety of other diagnostic applications:

  • BimmerCode
  • BimmerLink
  • TORQUE Lite/Pro
  • OBD Fusion
  • DashCommand
  • Car Scanner ELM OBD2
  • Carista OBD2
  • JScan
  • OBD Auto Doctor
  • LeafSpy
  • Dr.Prius
  • TrackAddict
  • Harry's LapTimer
  • inCarDoc
  • and more.
Vgate vLinker BM+ Supported Apps
Figure 5: vLinker BM+ BLE Supported Apps

BimmerCode Compatibility:

BimmerCode Compatibility Screenshot
Figure 6: BimmerCode Interface Example

BimmerLink Features:

  • Diagnostics: Read and clear diagnostic trouble codes from all control units in your car.
  • Real Time Sensor Values: Monitor important parameters with a personalized dashboard.
  • Data Logging: Create CSV sensor value log files for detailed inspection.
  • Exhaust Flap Remote Control: Control the exhaust flap (for cars with an exhaust flap by factory).
  • ASD Remote Control: Mute Active Sound Design (for cars with Active Sound Design by factory).
  • DPF Regeneration: Check diesel particulate filter state and request regeneration (for diesel cars with DPF).
  • Battery Registration: Register a new battery after replacement.
BimmerLink Features Overview
Figure 7: BimmerLink Features
BimmerLink Screenshots
Figure 8: BimmerLink Application Screenshots

4. Specifications

4.1. Supported Protocols

The vLinker BM+ supports a comprehensive set of protocols:

  • Multiple Protocols: 15 ELM format protocols, 23 STN format protocols, up to 64 user-defined protocols.
  • OBDII 5 Standard Protocols:
    • SAE J1850 VPW
    • SAE J1850 PWM
    • ISO 9141-2
    • ISO 14230-4
    • ISO 15765-4 CAN
  • Additional Protocols:
    • SAE J1939 CAN
    • ISO 11898 (raw CAN)
Vgate vLinker BM+ Supported OBD-II Protocols Diagram
Figure 9: Supported OBD-II Protocols Diagram

4.2. Rich Instruction Set and Software Compatibility

  • Fully compatible with ELM's AT command set.
  • Fully compatible with STN's ST command set.
  • 39 VT macro commands, simplifying communication steps.
  • Compatible with ELM and STN power management solutions.
  • Supports up to 5 ways to go to sleep (e.g., UART silence, battery low voltage, OBD bus silence).
  • Supports up to 5 ways to wake up from sleep mode (e.g., UART active, battery voltage drop, OBD bus active, key).
  • Device sleep power consumption is less than 2 mA.
  • OBD request byte up to 48 bytes for long frame communication.
  • UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.
  • 256-byte storage unit with over 100,000 erasable times.
  • Read and write operations on any unit in the storage area using VT commands.
  • "Mix ID Sending" mode of CAN protocol.
  • Optional formatted send data according to protocol.
  • Multiple WM sequence settings, including manual AT command setting.
  • Secure bootloader for easy firmware updates.
Vgate vLinker BM+ Instruction Set Details
Figure 10: Rich Instruction Set Details

4.3. OBD-II to RS232 Interpreter Comparison

The following table compares the vLinker BM+ with other interpreters regarding supported protocols and features:

OBD-II to RS232 Interpreter Comparison Table
Figure 11: OBD-II to RS232 Interpreter Comparison Table

5. Setup Guide

Follow these easy steps to set up your Vgate vLinker BM+:

Easy Steps To Use Overview
Figure 12: Easy Steps To Use

5.1. For Android Devices

  1. Insert Adapter & Power On: Insert the vLinker BM+ adapter into your car's OBD interface. Turn the ignition to the Key On Engine Off Position.
  2. Pair Bluetooth: Open your Android device's Bluetooth settings. Search for the device name "vLinker BM-Android" and click 'Pair'.
  3. Enter Pairing Code: If prompted, enter the pairing code "1234". If pairing is successful, you can proceed to the app. Note: Searching for the Bluetooth device may take some time. Ensure you select "vLinker BM-Android".
  4. Open App Settings: Open your chosen diagnostic app (e.g., BimmerCode) and navigate to its Settings.
  5. Select Adapter: In the app's settings, select "vLinker Bluetooth" as the adapter.
  6. Connect: Return to the main page of the app and click 'CONNECT'.
Android Setup Steps
Figure 13: Android Setup Steps

5.2. For iOS Devices

  1. Insert Adapter & Power On: Insert the vLinker BM+ adapter into your car's OBD interface. Turn the ignition to the Key On Engine Off Position.
  2. App Bluetooth Settings: On your iOS device, proceed directly to the OBD app's settings. Note: You may not see the Bluetooth device name directly in iOS settings. This device only requires you to enable the Bluetooth button on your iOS device and continue to the OBD app setting. Only iOS supported Bluetooth profiles can show the device name. Bluetooth LE 4.0 technology is supported.
  3. Open BimmerCode App Settings: Open the BimmerCode APP, click 'Setting', and enter the Setting Menu Page.
  4. Click Adapter: In the settings menu, click 'Adapter'.
  5. Select Adapter: Select "vLinker Bluetooth" as the adapter. Then, click the upper left corner to return.
  6. Return to Main Page: Click "Done" to go back to the main page of the APP.
  7. Connect: On the main page, click 'Connect'.
  8. Choose Vehicle Model: Select your vehicle model (e.g., BMW 7 Series...).
  9. Communicate with Car: Wait for the BimmerCode APP to communicate with the car.
  10. Select Control Unit: If communication is successful, you can now select the control unit you wish to work with.
iOS Setup Steps 1-7
Figure 14: iOS Setup Steps (Part 1)
iOS Setup Steps 8-9
Figure 15: iOS Setup Steps (Part 2)

6. Operating Instructions

Once connected, the functionality of your Vgate vLinker BM+ will depend on the diagnostic application you are using. Refer to your chosen app's instructions for specific operations like reading/clearing codes, live data monitoring, coding, or service resets.

6.1. Verifying OBD II Compliance

To determine if your vehicle is compliant with OBD II standards, locate a sticker under the hood labeled "VEHICLE EMISSION CONTROL INFORMATION". This sticker will indicate if your vehicle is OBD II certified.

OBD II Certified Label Example
Figure 16: Example of an OBD II Certified Label

7. Maintenance

7.1. Firmware Updates

The Vgate vLinker BM+ features a secure bootloader for easy firmware updates. Check the manufacturer's website or your diagnostic app for information on available updates and instructions on how to perform them to ensure optimal performance and compatibility.

7.2. Power Management

The device is designed with efficient power management, including automatic sleep/start functionality. Its sleep power consumption is less than 2 mA, preventing battery drain if left plugged into the OBD port.

8. Troubleshooting

  • Connection Issues: If you experience difficulty connecting via Bluetooth, ensure your vehicle's ignition is in the Key On Engine Off position. For iOS, remember that the device name might not appear in the general Bluetooth settings; connect directly through the app.
  • App Compatibility: Ensure you are using a compatible application. While the vLinker BM+ supports many apps, some advanced features or specific car models might require particular applications.
  • App Purchase: Note that diagnostic applications like BimmerCode and BimmerLink often require separate purchase or in-app purchases for full functionality. The vLinker BM+ is the hardware adapter only.
  • Communication Failure: If the app fails to communicate with the car, double-check all connection steps, ensure the adapter is firmly seated in the OBD port, and verify your vehicle's OBD II compliance.

9. User Tips

  • Diagnostic applications like BimmerCode and BimmerLink typically require separate purchase for full functionality.
  • The Bluetooth connection is generally fast and accurate, providing a stable link for diagnostics.
  • This tool works effectively with various BMW models, including older E-series and newer G-series, for tasks like reading/clearing errors, resetting service lights, and registering battery replacements.
  • Always ensure your car is OBD II compliant by checking the

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.