1. Product Overview
The RETEKESS TD108 is a smart wireless watch receiver designed for various service environments such as restaurants, cafes, hospitals, and clinics. It features an LCD dot matrix screen, multi-language support, and can be paired with up to 999 call buttons.

1.1 Main Features
- LCD dot matrix screen for easy use.
- Calendar display; time and date are retained when powered off.
- Supports up to 999 wireless transmitters with editable names.
- Compatible with various transmitters from different manufacturers; key values can be redefined.
- Stores the last 99 groups of calling history.
- Power ON/OFF timer function.
- Multiple prompt modes: beep, vibration, and light (can be combined).
- Adjustable alert/prompt numbers.
- Exclusive power-saving technology for long standby time.
- Built-in large capacity rechargeable lithium battery (380 mAh).
- Compatible with 1527 (resistance 150K-470K) and 2262 (resistance 1.5M-4.7M) transmitters.
1.2 Watch Pager Appearance

The watch pager has 4 main buttons, a USB port, and a breathing light:
- [Setting/≡] Button: Short press to enter system setup menu or submenu. Long press to shift bits, delete power timer, or alarm clock.
- [Up/△] Button: Short press to page up. Long press to page up continuously.
- [Down/▽] Button: Short press to page down. Long press to page down continuously.
- [Back/↩] Button: Short press to delete current calling record, or navigate to the previous menu in settings. Long press to delete all calling history or return to the main interface.
- USB Port: For connecting the USB charger.
- Breathing Light: Flashes green for a call. Red during charging or low battery. Green when fully charged.
2. Setup Instructions
2.1 Initial Charging
Before first use, ensure the watch receiver is fully charged. Connect the magnetic charger to the watch, ensuring the charging pins align automatically. Use only the provided adapter and cable. Unauthorized adapters or cables are strictly prohibited.

2.2 Power On/Off
- To Turn On: When the watch is off, press and hold the [Back/↩] button for 3 seconds until the screen lights up, then release.
- To Turn Off: When the watch is on, press and hold the [Back/↩] button for 3 seconds. The screen will display "Shut down". Then, short press the [Setting/≡] button to confirm. Time and date information will not be lost.
2.3 Adding Transmitters (Call Buttons)
The watch can pair with up to 999 call buttons. To add a transmitter:
- In standby mode, short press the [Setting/≡] button to enter the system setup menu.
- Short press the [Setting/≡] button again to enter the "Add buttons" submenu.
- The screen will display an area code (e.g., "0001"). Use the [Up/△] or [Down/▽] buttons to select the desired bit for the area code. Each bit can be 0-9, A-Z, '-' (middle bar), '_' (down bar), or a space.
- After setting the correct area code, the screen will display "Pls push button".
- Press the button on the transmitter you wish to pair. The watch will beep upon receiving the signal, and the number of programmed transmitters for that area will automatically increase.
Tips:
- It is recommended to add or program only one transmitter per area code at a time.
- To quickly jump to area code 0, press the [Down/▽] button.
2.4 Defining Key Values
If the display function on the watch screen does not match the function name of the corresponding button on the transmitter (e.g., "Water" instead of "Call"), you can redefine the key value:
- In standby mode, short press the [Setting/≡] button to enter the system setup menu.
- Use the [Up/△] or [Down/▽] buttons to move the cursor to "Keys define".
- Press the [Setting/≡] button to enter the keys define submenu.
- When the screen shows a function name (e.g., "Water"), short press the [Setting/≡] button, then press the corresponding button on the transmitter.
- The watch will beep and display "Set successfully" if the key value is redefined.
Available key values include: ORDER, CALL, PAY, SERVICE, CANCEL, MEDICATION, SOS, NEEDLE, DOCTOR, COFFEE, JUICE, SATIS (satisfaction), DISSA (dissatisfaction), CLEAN, CHECK (satisfaction), etc.
2.5 Setting Date and Time
- In standby mode, short press the [Setting/≡] button to enter the system setup menu.
- Use the [Up/△] or [Down/▽] buttons to move the cursor to "Date & time setting".
- Press the [Setting/≡] button to enter the date and time setting submenu.
- Use the [Up/△] or [Down/▽] buttons to adjust the values for Hour (H), Minute (M), Second (S), Year (Y), and Day (D).
- Short press the [Setting/≡] button to move the cursor between H, M, S, Y, and D.
- After setting, press [Back/↩] to exit.
2.6 Language Selection
The watch receiver supports multiple languages. Version 1 includes English, Russian, and Portuguese. Version 2 includes English, French, and German.

- In standby mode, short press the [Setting/≡] button to enter the system setup menu.
- Use the [Up/△] or [Down/▽] buttons to move the cursor to "Language".
- Press the [Setting/≡] button to enter the language setting submenu.
- Use the [Up/△] or [Down/▽] buttons to select the desired language.
- Press the [Setting/≡] button to confirm.
- After setting, press [Back/↩] to exit.
3. Operating Instructions
3.1 Call Operation
Once a transmitter (call button) is programmed with the watch pager, it can send calls. When a call is received:
- The watch will display the area code (e.g., "NO 88"), the number of calls (e.g., "99+" if more than 99), and the calling time (e.g., "16:06").
- It will also show the current call record number out of the total (e.g., "01/03" for the first of three calls).
- Short press [Up/△] or [Down/▽] to check previous call records.
- The watch can query a maximum of 99 groups of calling history.
- Short press [Back/↩] to delete all calling history.
3.2 Prompt Settings
The TD108 offers three types of prompts: bright LCD backlight, vibration, and beep. You can select one or a combination of these.

- In standby mode, short press the [Setting/≡] button to enter the system setup menu.
- Use the [Up/△] or [Down/▽] buttons to move the cursor to "Prompt setting".
- Press the [Setting/≡] button to enter the prompt setting submenu.
- Use the [Up/△] or [Down/▽] buttons to move the cursor to the desired prompt mode.
- Press the [Setting/≡] button to select or deselect the mode. A filled icon indicates selection, an empty icon indicates deselection.
- After setting, press [Back/↩] to exit.
3.3 Alert Repeat
You can set the watch to repeat alerts for incoming calls.
- In standby mode, short press the [Setting/≡] button to enter the system setup menu.
- Use the [Up/△] or [Down/▽] buttons to move the cursor to "Alert repeat".
- Press the [Setting/≡] button to enter the alert repeat submenu.
- Use the [Up/△] or [Down/▽] buttons to select the desired repeat times. A filled icon indicates selection, an empty icon indicates deselection.
- After setting, press [Back/↩] to exit.
3.4 Power ON/OFF Timer
The watch supports up to 10 groups of timing ON/OFF settings.
- In standby mode, short press the [Setting/≡] button to enter the system setup menu.
- Use the [Up/△] or [Down/▽] buttons to move the cursor to "Power time".
- Press the [Setting/≡] button to enter the power time submenu.
- To Add: Move the cursor to 'Add', then short press the [Setting/≡] button to shift between hour, minute, and week settings. Use [Up/△] or [Down/▽] to adjust values. Select "Timing off" or "Timing on".
- To Edit: Select the power time group to edit, then press [Setting/≡] to adjust hour, minute, week, and "Timing off"/"Timing on" settings.
- To Delete: Select the power time group to delete, then long press the [Setting/≡] button.
- After setting, press [Back/↩] to exit.
3.5 Pending Remind
This feature reminds you of unattended calls at set intervals.
- In standby mode, short press the [Setting/≡] button to enter the system setup menu.
- Use the [Up/△] or [Down/▽] buttons to move the cursor to "Pending remind".
- Press the [Setting/≡] button to enter the pending remind submenu.
- Use the [Up/△] or [Down/▽] buttons to adjust the reminder interval (in minutes).
- After setting, press [Back/↩] to exit. For example, if set to 10 minutes, unattended calls will be reminded every 10 minutes until addressed.
3.6 Alarm Clock
You can set up to 10 alarm clocks.
- In standby mode, short press the [Setting/≡] button to enter the system setup menu.
- Use the [Up/△] or [Down/▽] buttons to move the cursor to "Alarm clock".
- Press the [Setting/≡] button to enter the alarm clock submenu.
- To Add: Move the cursor to 'Add', then short press the [Setting/≡] button to shift between hour, minute, and date settings. Use [Up/△] or [Down/▽] to adjust values.
- To Edit: Select the alarm clock group to edit, then press [Setting/≡] to adjust hour, minute, and date settings.
- To Delete: Select the alarm clock group to delete, then long press the [Setting/≡] button.
- After setting, press [Back/↩] to exit.
3.7 Clear History
This function allows you to clear the call history.
- In standby mode, short press the [Setting/≡] button to enter the system setup menu.
- Use the [Up/△] or [Down/▽] buttons to move the cursor to "Clear history".
- Press the [Setting/≡] button to enter the clear history submenu.
- Use the [Up/△] or [Down/▽] buttons to change the number of seconds for clearing. Press [Down/▽] once to reduce by 5 seconds. Default is 0 seconds.
- After setting, press [Back/↩] to exit.
3.8 Black Box (Call History Review)
You can review all calling history stored in the black box.
- In standby mode, short press the [Setting/≡] button to enter the system setup menu.
- Use the [Up/△] or [Down/▽] buttons to move the cursor to "Black box".
- Press the [Setting/≡] button to enter the black box to check and review all calling history.
- Press [Back/↩] to exit.
4. Maintenance
4.1 Cleaning
If the watch is not charging properly, the charging pins might be dirty. Use a dry and soft fabric to remove any dirt and clean the charging pins.
4.2 Waterproof Level
The TD108 watch receiver has an IP55 waterproof rating. This means it supports life waterproof features, making it rainproof and resistant to food and soup splashes. It is suitable for restaurant environments where waiters or chefs may wash hands and dishes.

5. Troubleshooting
| Malfunction | Cause | Solution |
|---|---|---|
| Transmitter pressed, watch does not respond | 1. Transmitter not programmed 2. Transmitter battery low | 1. Add transmitter (refer to 2.3) 2. Replace transmitter battery |
| Short receiving range | Transmitter battery low | Replace transmitter battery |
| No vibrate, sound, or light on incoming call | Prompt not set up | Enter prompt setting menu to set up (refer to 3.2) |
| Transmitter from other manufacturers does not display function well | Key value does not match | Reset key value (refer to 2.4) |
| Automatically shuts down | 1. Power is too low 2. Power timer set | 1. Please charge 2. Delete unnecessary power time (refer to 3.4) |
| Cannot charge properly | Not contacting well | Use dry and soft fabric to remove dirt and clean charging pins |
6. Specifications
| Feature | Specification |
|---|---|
| Brand Name | RETEKESS |
| Model Number | TD108 |
| Origin | Mainland China |
| Certification | CE, FCC |
| Working Frequency | 433MHz |
| Input Power | DC 5V 1A |
| Power Supply | Built-in rechargeable lithium battery (380 mAh) |
| Working Temperature | -20°C - 55°C |
| Transmitter Quantity | Up To 999pcs |
| Receiving Range (Open Air) | 300 meters (Outdoor: 80m, Indoor: 40m) |
| Waterproof Level | IP55 |
| Dimensions (without watchband) | 61x41x14mm |
| Weight | 45g |
| Battery Included | Yes |

7. Package Contents
- 1 x TD108 Wireless Watch Receiver
- 1 x Magnetic Charging Cable
- 1 x User Manual
- 1 x Power Adapter (EU/US/AU/UK optional, color may vary)

8. User Tips
- Compatibility: This watch receiver is designed to work exclusively with Retekess brand call buttons. It may not be compatible with call buttons from other brands.
- Battery Replacement: The TD108 features a built-in rechargeable lithium battery. For battery replacement, it is recommended to contact Retekess customer support or a qualified service technician. Attempting to replace the battery yourself may void the warranty.
- Replacement Straps: If you need replacement straps for your TD108 watch receiver, please contact Retekess customer support or your original seller for assistance.
- Call Buttons: The TD108 watch receiver is sold separately from call buttons. Ensure you purchase compatible Retekess call buttons for a complete calling system.
- Programming: While the watch offers extensive programming options, some users find it helpful to program one call button at a time per area code to avoid confusion.
9. Warranty and Support
For warranty information, technical support, or any questions regarding your RETEKESS TD108 Wireless Watch Receiver, please refer to the official Retekess website or contact their customer service directly. Keep your purchase receipt for warranty claims.
A detailed user manual in PDF format is available for download from the product page or by contacting customer support.