Introduction
Thank you for purchasing the CACAZI Wireless Doorbell. This manual provides detailed instructions for the installation, operation, and maintenance of your new doorbell system. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
The CACAZI Wireless Doorbell features a stylish design, easy installation, and a variety of customizable options including music and volume levels. It boasts a long receiving distance and a waterproof transmitter for reliable performance.
Important Safety Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment.
Package Contents
Your CACAZI Wireless Doorbell package may include the following components, depending on the specific configuration purchased (e.g., number of buttons and receivers):
- Wireless Transmitter (Doorbell Button)
- Wireless Receiver (Plug-in Chime Unit) - Quantity varies by model (1, 2, or 3 receivers)
- Mounting Hardware (Double-sided adhesive tape, screws, and anchors)
- User Manual (This document)
Note: The transmitter requires a 23A12V alkaline battery, which is not included in the package.
Product Overview
The CACAZI Wireless Doorbell system consists of a transmitter (doorbell button) and one or more receivers (chime units). Key features include:
- Waterproof Design: The transmitter is designed without screw chucks to achieve waterproof and dustproof performance, extending its service life.
- Long Range: Up to 300 meters (984 feet) receiving distance in open areas.
- Multiple Melodies: Choose from approximately 38 different chimes.
- Adjustable Volume: 4 levels of volume adjustment (0-80dB), including a mute function.
- LED Light Indicator: Eye-catching backlight flashes when the doorbell button is pressed, ideal for the elderly, deaf, or pregnant women.
- Memory Function: Retains your last selected melody and volume level after power loss.
- Anti-interference: Uses machine-learning to prevent interference from other wireless transmitters.
Setup
1. Install Transmitter Battery
Open the transmitter casing and insert one 23A12V alkaline battery (not included), ensuring correct polarity.
2. Plug in Receiver
Plug the receiver into a standard electrical outlet. The receiver is available with US, EU, UK plugs, and AU adapters to suit various regions.
3. Mount Transmitter (Doorbell Button)
There are two primary methods for mounting the doorbell button:
- Solution A: Double-sided Adhesive Tape
Clean the desired mounting surface thoroughly. Apply the double-sided adhesive tape to the back of the transmitter and firmly press it onto the wall. - Solution B: Screws and Anchors
For a more secure installation, use the provided screws and anchors. Mark the desired drilling spots, drill pilot holes, insert anchors, and then screw the transmitter into place.
Important Note: The doorbell button cannot be placed on an iron door or metal surface, as this will interfere with the wireless signal and shorten the transmission distance.
Operating Instructions
1. Music Selection and Volume Adjustment
On the receiver unit, locate the 'Music KEY' and 'Volume KEY'.
- To Change Melody: Press the 'Music KEY' repeatedly to cycle through the 38 available melodies.
- To Adjust Volume: Press the 'Volume KEY' to cycle through the 4 volume levels (0-80dB). One of the levels is a mute function.
2. Pairing Signals (Matching Transmitter to Receiver)
If your doorbell is not ringing or you wish to pair a new transmitter/receiver, follow these steps:
- Select your desired music melody on the receiver.
- Long press the 'Volume KEY' on the receiver for approximately 4 seconds. The receiver's LED light will illuminate, indicating it has entered the learning (pairing) state.
- Immediately press the transmitter (doorbell button). The receiver will blink and emit a ringtone, indicating successful pairing.
This process allows for free matching of transmitters and receivers. The system uses machine-learning to prevent interference.
3. LED Light Indicator
When the doorbell button is pressed, the receiver's LED light will flash blue, providing a visual alert in addition to the audible chime.
Maintenance
- Cleaning: Wipe the doorbell button and receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: When the transmitter's performance degrades (e.g., reduced range or inconsistent ringing), it may be time to replace the 23A12V alkaline battery.
- Waterproof Design: While the transmitter has a waterproof design (IP44 rated), avoid submerging it in water or exposing it to extreme weather conditions for prolonged periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Doorbell not ringing / Not working normally | Not paired, low transmitter battery, interference. | 1. Try pairing signals again (see Operating Instructions). 2. Replace the 23A12V battery in the transmitter. 3. Ensure the transmitter is not mounted on an iron door or metal surface. |
| Reduced receiving distance | Obstacles (walls, metal), low transmitter battery, interference. | 1. Relocate the receiver to a more central location or closer to the transmitter. 2. Ensure there are minimal obstructions between the transmitter and receiver. 3. Replace the transmitter battery. 4. Reorient or relocate the receiving antenna (if accessible). 5. Increase the separation between the equipment and other electronic devices. |
| Interference with other devices (radio/TV) | Proximity to other electronic equipment. | 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the doorbell equipment and the affected device. 3. Connect the doorbell receiver into an outlet on a circuit different from that to which the affected device is connected. |
If problems persist after trying these solutions, please consult the dealer or an experienced radio/TV technician for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Brand Name | CACAZI |
| Model Number | A68 |
| Doorbell Type | Wireless |
| Power Source (Transmitter) | 23A12V alkaline battery (not included) |
| Power Source (Receiver) | AC 110-220V / 110-250V (US/EU/UK Plug, AU adapter) |
| Frequency | 433MHz |
| Waterproof Grade | IP44 |
| Melodies | 38 ringtones |
| Volume Levels | 4 levels (0-80dB), including mute |
| Receiving Distance | 300M Remote (in open area) |
| Transmitter Size | 77mm x 46mm x 20mm |
| Receiver Size | 90mm x 56mm x 20mm |
User Tips
- For larger homes or multi-story dwellings, consider purchasing additional receivers to ensure the chime is audible throughout your property.
- Always test the doorbell's range after installation, especially if there are many walls or potential obstructions between the button and receiver.
- If you experience signal issues, try repositioning the receiver to a more open area or closer to the transmitter.
- Remember that the doorbell button should not be placed on an iron door or metal frame, as this can significantly reduce its effective range.
Warranty and Support
For detailed warranty information, technical support, or further assistance, please refer to the official product documentation or contact your retailer. A comprehensive user manual in PDF format may be available for download at this link.