Dooya DC2702

Contents

Dooya DC2702 15-Channel Electric Curtain Motor Remote Controller

User Manual

1. Introduction

The Dooya DC2702 is a 15-channel remote controller designed for smart home electric curtain motors. It allows you to control up to 15 individual or groups of motors separately, providing convenient and flexible operation of your automated curtains or blinds.

Dooya DC2702 15-channel remote controller front view

Image: Front view of the Dooya DC2702 15-channel remote controller.

2. Setup

2.1 Battery Installation

  1. Open the battery compartment cover on the back of the remote controller.
  2. Insert the required battery (typically a CR2450 3V lithium battery, though not explicitly stated, common for such remotes) ensuring correct polarity.
  3. Close the battery compartment cover securely.

2.2 Pairing with Motor

To pair the remote controller with your electric curtain motor:

  1. Ensure the motor is powered on and in pairing mode (refer to your motor's specific instructions for entering pairing mode, often a short press of a program button on the motor).
  2. On the DC2702 remote, remove the battery cover to access the 'P2' button.
  3. Press the 'P2' button twice quickly. The remote's display should show a pairing indicator.
  4. Press the 'Up' or 'Down' button on the remote to confirm pairing. The motor should respond (e.g., jog slightly) to indicate successful pairing.

2.3 Copying Code Between Remotes

You can copy the programming from one DC2702 remote to another:

  1. On the source remote (the one already paired), remove the battery cover and press the 'P2' button twice.
  2. On the target remote (the one you want to program), remove the battery cover and press the 'P2' button once.
  3. The target remote should now have the same programming as the source remote.

Video: Demonstration of battery installation, motor pairing, and remote code copying.

3. Operating Instructions

The DC2702 remote controller features a clear display and intuitive buttons for easy operation.

Dooya DC2702 remote controller close-up

Image: Close-up of the DC2702 remote controller showing the display and control buttons.

  • Channel Selection: Use the left and right arrow buttons (usually below the main control buttons) to cycle through the 15 available channels. The selected channel number will be displayed on the screen.
  • Open/Up: Press the 'Up arrow' button to open the curtain or move it upwards.
  • Close/Down: Press the 'Down arrow' button to close the curtain or move it downwards.
  • Stop: Press the 'Stop' button (usually a horizontal line) to halt the curtain movement at any desired position.
  • Group Control: If multiple motors are assigned to the same channel, they will operate simultaneously when that channel is selected.

4. Maintenance

  • Cleaning: Wipe the remote controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Battery Replacement: Replace the battery when the remote's range decreases or the display becomes dim. Follow the battery installation steps in Section 2.1.
  • Storage: Store the remote in a dry place, away from direct sunlight and extreme temperatures.

5. Troubleshooting

  • Remote not responding:
    • Check if the battery is correctly installed and has sufficient charge. Replace if necessary.
    • Ensure the remote is within the operating range of the motor.
    • Verify that the correct channel is selected on the remote.
  • Motor not pairing:
    • Confirm the motor is in pairing mode as per its specific instructions.
    • Ensure the remote's 'P2' button is pressed correctly and the pairing indicator appears.
    • Check for any obstructions or interference between the remote and the motor.
  • Compatibility Issues:
    • Important Note: This remote controller cannot work with Dooya new motors that use rolling code technology. Ensure your motor is compatible with fixed code emitters.
    • If using with non-Dooya motors or receivers (e.g., Loratap, DD2712H drivers), verify compatibility with the manufacturer's specifications for those devices.

6. Specifications

Feature Specification
Model Number DC2702
Channels 15
Battery Included No
High-concerned chemical None
Wattage 0
Origin Mainland China
Certification None

7. User Tips

  • Channel Management: Assign specific channels to individual curtains or groups of curtains for personalized control. For example, Channel 1 for living room curtains, Channel 2 for bedroom curtains, etc.
  • Range Optimization: For optimal performance, ensure a clear line of sight between the remote and the motor, and avoid significant obstacles that could interfere with the signal.
  • Battery Type: While not specified, most similar remotes use a CR2450 3V button cell battery. It's advisable to check the battery compartment for the exact type when replacing.

8. Warranty and Support

For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.