Introduction
Thank you for choosing the ALLSOME MINIQ BG6117 Bench Drill Stand. This versatile tool is designed to convert your electric drill into a precision drilling and grinding station, offering enhanced stability and control for various tasks. Please read this manual thoroughly before assembly and operation to ensure safe and efficient use.
Safety Instructions
- Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, when operating the drill stand.
- Ensure the workbench is stable and securely mounted before use.
- Keep the work area clean and well-lit.
- Do not operate the drill stand in damp or wet conditions.
- Keep children and bystanders away from the operating area.
- Securely clamp the workpiece before drilling or grinding.
- Ensure the electric drill is properly secured in the clamp before operation.
- Disconnect the power tool from the power source before making any adjustments or changing accessories.
- Do not force the drill; let the tool do the work.
- Regularly inspect the drill stand for any damage or loose parts.
Package Contents
Please check the package for the following items:
- Drill Stand Base
- Support Column
- Drill Clamp Assembly (with depth scale and handle mechanism)
- Operating Handle
- Hex Wrenches (various sizes)
- Rubber Sleeves/Adapters for drill clamp
- Instruction Manual (this document)

Image: All components of the ALLSOME MINIQ BG6117 Bench Drill Stand.
Specifications
| Feature | Specification |
|---|---|
| Model Number | BG6117 |
| Brand Name | Allsome |
| DIY Supplies | Electrical |
| Clamp Diameter | 38-43mm |
| Work Travel (Drilling Depth) | 60mm (6 cm) |
| Rotation Angle | 0-90° |
| Overall Height | 490mm / 19.29in |
| Base Dimensions (W x D) | 220mm x 160mm / 8.66in x 6.3in |
| Gross Weight | Approximately 2.25KG / 4.96LB |
| Certification | CE |

Image: Key dimensions of the drill stand.

Image: Detailed view of the drill clamp, depth scale, and CE certification mark.
Setup Instructions
- Assemble the Stand:
- Insert the support column into the base.
- Secure the column to the base using the provided screws and hex wrench.
- Attach the drill clamp assembly to the top of the support column.
- Insert the operating handle into its designated slot on the drill clamp assembly.

Image: Securing the support column to the base.
- Mount the Electric Drill:
- Loosen the screws on the drill clamp.
- Insert your electric drill into the clamp. Use the appropriate rubber sleeves/adapters if your drill's collar diameter is smaller than the clamp's maximum opening (38-43mm).
- Tighten the screws securely to hold the drill firmly in place.

Image: Attaching an electric drill to the stand's clamp.
- Adjust Depth and Angle:
- The drill clamp assembly can be adjusted vertically along the support column. Loosen the locking mechanism, set to desired height, and re-tighten.
- The clamp also allows for angle adjustment from 0-90 degrees for angled drilling. Loosen the angle adjustment screws, set the desired angle using the scale, and re-tighten.
- Use the depth scale and stop to set the desired drilling depth (maximum 60mm).

Image: Adjusting the drill clamp for angled operations.
Operating Instructions
- Secure Workpiece: Place your workpiece on the base plate. For small or irregular items, use a workbench vise (not included) to secure it firmly.
- Install Drill Bit/Accessory: Ensure the electric drill is unplugged. Install the appropriate drill bit or grinding accessory into the drill chuck.
- Align and Set Depth: Lower the drill bit to the workpiece to check alignment. Adjust the height and depth stop as needed.
- Start Operation:
- Plug in the electric drill.
- Turn on the electric drill.
- Slowly lower the drill bit into the workpiece using the operating handle. Apply steady, even pressure.
- Once the desired depth is reached, retract the drill bit using the handle.
- Turn off the electric drill.

Image: Demonstrating precise drilling into a wooden plank.

Image: Drilling multiple holes in a PVC pipe, showcasing stability.
- Grinding/Sanding: If using a grinding or sanding attachment, ensure the workpiece is securely held. Carefully bring the workpiece into contact with the rotating accessory.
Product Demonstration Video
Video: A comprehensive demonstration of the ALLSOME MINIQ BG6117 Bench Drill Stand, including assembly, drilling various materials, and using it for grinding.
Maintenance
- Keep the drill stand clean and free of dust and debris.
- Wipe down metal parts with a lightly oiled cloth to prevent rust.
- Check all fasteners regularly and tighten if necessary.
- Lubricate moving parts, such as the column and handle mechanism, periodically with light machine oil.
- Store the drill stand in a dry, safe place when not in use.
Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Drill bit wobbles or lacks precision. | Ensure the electric drill is securely clamped. Check for any play in the drill clamp assembly; the copper strip in the mount can be adjusted to reduce play. Verify the drill bit is properly seated and sharpened. |
| Limited drilling depth. | The maximum work travel is 60mm (6 cm). This is a design limitation. |
| Return spring feels weak. | The return spring may weaken over time. Consider replacing it if it significantly impacts usability. |
| Stand feels unstable or flimsy. | Ensure all assembly screws are tightened. The support column is thin-walled and may benefit from replacement with a thicker-walled pipe for increased rigidity, especially for heavier drills or demanding tasks. |
| Drill does not fit the clamp. | The clamp is designed for drills with a collar diameter of 38-43mm. Ensure your drill fits within this range, using provided adapters if necessary. Engravers or very heavy drills may not be suitable. |
User Tips
- This drill stand is particularly effective for small, precise tasks such as drilling printed circuit boards (PCBs).
- For optimal stability and precision, ensure your workbench is solid and consider bolting the drill stand down if performing heavy-duty work.
- If you experience any play in the drill's movement, check the adjustable copper strip within the drill clamp and tighten it as needed.
- For increased durability and stability, some users have found success replacing the standard support column with a thicker-walled stainless steel pipe.
- While suitable for most electric drills within the specified clamp diameter, very heavy drills or specialized rotary tools like engravers might not be ideal due to weight or fit.
Warranty and Support
For warranty information, technical support, or replacement parts, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.