1. Introduction
This manual provides essential information for the safe and efficient operation of your PowMr MPPT Solar Charge Controller. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your solar system components.
The PowMr MPPT Solar Charge Controller is designed to manage power flow from your solar panel to your battery bank, ensuring efficient charging and protecting your batteries from overcharging and over-discharging. It features Maximum Power Point Tracking (MPPT) technology for enhanced solar energy harvesting.
2. Key Features
- MPPT Solar Charge Controller
- Available in 10A/20A/30A/40A models (this manual focuses on the 40A model)
- Common Negative Ground design
- Compatible with Lead-acid (AGM, Gel), and Lithium Batteries
- Supports 130W-1040W Solar Panels
- Max Solar Input 100V, 60V (10A)
- Multiple LCD and LED modules optional
- Dual USB 5V 2.2A output for charging devices
- RS485 Slave interface for communication
- Modular design for varied combinations
3. Unboxing and Components
Upon opening the package, verify that all components are present and undamaged. The package typically includes:
- PowMr MPPT Solar Charge Controller (Triron N Series)
- User Manual
- Certificate
- Remote Temperature Sensor (TS-R)
- Small green terminal blocks for wiring
Video: Unboxing and overview of the PowMr MPPT Solar Charge Controller components.
The controller features a modular design, allowing for various combinations of display and interface modules to meet different requirements. For example, the Triron4210N-DS2-UCS model includes a DS2 (5 buttons) display module and a UCS (USB COM Slave) interface module.

Image: The modular design of the controller, showing how the display and interface modules can be detached and reattached.
4. Installation and Wiring
Safety First: Before beginning installation, ensure all power sources (solar panels, batteries) are disconnected. Always wear appropriate personal protective equipment.
4.1 Wiring Terminals Overview
The controller has clearly labeled terminals for connection:
- Temp Sensor: For connecting the remote temperature sensor.
- Solar Panel (+/-): For connecting the solar panel array.
- Battery (+/-): For connecting to the battery bank.
- Load (+/-): For connecting DC loads.
- Dual USB: 5V, Max 2.2A output for charging devices.
- RS485 Slave: For communication with external devices (e.g., PC, MT50, eBox-WIFI-01).

Image: Detailed view of the controller's terminals, showing connections for temperature sensor, solar panel, battery, load, dual USB, and RS485 Slave.
4.2 Connection Sequence
Follow this sequence for safe and correct installation:
- Connect the Battery: Always connect the battery to the controller first. Ensure correct polarity (+ to + and - to -). Tighten the cables securely.
- Connect the Solar Panel: Connect the solar panel array to the controller. Ensure correct polarity.
- Connect the Remote Temperature Sensor: Plug the remote temperature sensor into its dedicated terminal. Paste the sensor to the battery case for accurate temperature readings.
- Connect DC Loads (Optional): If you have DC loads, connect them to the load terminals.
Important: Connecting the solar panel before the battery, or connecting with incorrect polarity, can damage the controller and other components.
5. Operating Instructions
5.1 LCD Display and Buttons
The controller features an LCD display and several buttons for monitoring and configuration:
- PV+/-, BATT+/-, LOAD+/-, SET, ESC: These buttons are used to navigate menus, adjust settings, and confirm selections.
- LED Indicators: Provide quick status updates for solar charging, battery status, and load output.
The LCD display shows real-time data such as solar panel voltage/current, battery voltage/current, load voltage/current, and system status. You can navigate through different screens using the buttons.

Image: Close-up of the LCD display and control buttons, showing various parameters like PV voltage, battery voltage, and load voltage.
5.2 Setting Battery Type and Parameters
It is crucial to set the correct battery type and parameters for optimal charging and battery longevity. The controller allows easy setup of battery type (e.g., Flooded, Gel, Sealed, Lithium), temperature units, and capacity.
Use the navigation buttons (PV+/-, BATT+/-, LOAD+/-, SET, ESC) to access the settings menu and adjust parameters according to your battery specifications. Refer to the detailed user manual (PDF, if available) for specific menu navigation and parameter values.
5.3 USB Charging
The controller is equipped with dual USB ports (5V, Max 2.2A total) for charging small electronic devices.

Image: Close-up of the dual USB ports on the controller, demonstrating a phone being charged.
5.4 Communication Interfaces
The RS485 Slave port allows for advanced monitoring and control through various accessories:
- PC Communication Cable (RJ45 to USB): Connects the controller to a PC for monitoring via software.
- OTG Cable (RJ45 to USB OTG): Connects the controller to an Android smartphone for monitoring via a mobile app.
- Remote Display (MT50): A dedicated remote meter for displaying system data and modifying parameters.
- eBox-WIFI-01 Box: Enables Wi-Fi connectivity for remote monitoring and control via a mobile app.
- eBox-BLE-01: Enables Bluetooth connectivity for monitoring and control via a mobile app.
- eLOG01: External logger for data storage.

Image: Diagram illustrating various communication options for the MPPT solar charge controller, including PC, mobile app, MT50 remote display, eBox-WIFI-01, eBox-BLE-01, and eLOG01.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your solar charge controller:
- Cleanliness: Keep the controller clean and free from dust and debris. Use a dry cloth for cleaning.
- Connections: Periodically check all wiring connections for tightness. Loose connections can cause overheating and damage.
- Ventilation: Ensure adequate airflow around the controller, especially around the heat sink, to prevent overheating.
- Battery Inspection: Regularly inspect your batteries for any signs of damage, corrosion, or swelling.
- Firmware Updates: Check the manufacturer's website for any available firmware updates for your controller model.
7. Troubleshooting
Here are some common issues and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller not turning on / No display | No battery connected or battery voltage too low. Incorrect battery polarity. Loose connections. | Ensure battery is connected first and has sufficient voltage. Check all battery connections for tightness and correct polarity. |
| No solar charging | Solar panel not connected or incorrect polarity. Insufficient sunlight. Damaged solar panel or wiring. | Check solar panel connections and polarity. Ensure panels are in direct sunlight. Inspect panels and wiring for damage. |
| Battery not fully charging | Incorrect battery type setting. Undersized solar array. Battery degradation. | Verify battery type setting in the controller. Consider adding more solar panels. Test battery health. |
| Load not working | Load not connected or incorrect polarity. Overload protection activated. Battery voltage too low (LVD). | Check load connections and polarity. Reduce load. Charge battery. Check load settings in the controller. |
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | PowMr |
| Model Number | Triron4210N-DS2-UCS |
| Item | EPever MPPT 40A Solar Charge and Discharge Controller |
| Maximum Current | 40A |
| Battery Voltage | 12V 24V Auto |
| Max. PV open circuit voltage | 100V Solar Panel |
| Max. PV input power | 520W/12V; 1040W/24V |
| Grounding | Common negative |
| RS485 interface | 5VDC/100mA |
| USB interface | 5VDC/2.2A (Total) |
| LCD | Blacklight LCD Display |
| Battery Type | Lead-acid AGM Lithium Gel Battery |
| Charging mode | MPPT (Maximum Power Point Tracking) |
| Application | Charger Controller, Voltage Controller, Lighting Controller, Solar System Controller, Solar Working Station |
| Certification | CE |
| Origin | Mainland China |
9. User Tips
- MPPT vs. PWM: This controller utilizes MPPT (Maximum Power Point Tracking) technology, which is generally more efficient than PWM (Pulse Width Modulation) controllers, especially in colder weather or when the solar panel voltage is significantly higher than the battery voltage. MPPT controllers can extract more power from your solar panels, leading to faster charging and better overall system performance.
- Battery Connection Priority: Always connect the battery to the charge controller first, and disconnect it last. This prevents potential damage to the controller from high voltage surges from the solar panels without a battery load.
- Temperature Sensor: Ensure the remote temperature sensor is properly attached to the battery case. This allows the controller to accurately adjust charging parameters based on battery temperature, prolonging battery life.
10. Warranty and Support
For warranty information, technical support, or any inquiries, please contact PowMr Official Store directly. You can find their contact details below:
- Manufacturer: BEIJING EPSOLAR TECHNOLOGY CO., LTD
- Web: www.powmr.com
- Email: support@powmr.com
- Address: A8 Building, Taizhong Industrial Area, Shenzhen, China
- Tel: 86-755-28219903
Please refer to the official PowMr website or your purchase documentation for the most up-to-date warranty terms and conditions.