retekess TD004

Contents

Retekess TD004 Wireless Calling Bell Pager User Manual

Model: TD004

1. Product Overview

Thank you for choosing the Retekess TD004 Wireless Calling Bell Pager. This product features a minimalist design, is easy to operate and install, and is suitable for various basic calling scenarios. Please read this instruction manual carefully before use to ensure smooth operation.

Product Name

Retekess TD004 Two-key Wireless Calling Bell Pager

Product Structure

External Structure:

  • Housing: Made of ABS plastic material, compact and lightweight.
  • Call Button: Single-point button on the front, made of soft and comfortable silicone.
  • Indicator Light: Embedded LED light in the center of the button to indicate the call status.
  • Battery Compartment: Screw-down design on the back, housing a built-in specific model battery.
  • Mounting Components: High-adhesion adhesive on the back for easy installation, and a base for wall-fixing with screws.

Internal Structure:

  • Simple Wireless Module: Features a low-power design and stable signal, compatible with universal call hosts.
  • Trigger Switch: Linked with the button to ensure activation upon pressing.

Function Introduction

  • One-button Call: A simple press of the button triggers a call signal, making it easy to use for all ages.
  • Status Indicator: The LED flashes red during a call and automatically turns off after a response is received by the call host.
  • Low Power Consumption Design: Extremely low standby power consumption, with a single battery lasting for approximately 6000 cycles.
  • Wide Compatibility: Supports pairing with most general-purpose call hosts, adapting to various basic call needs.

2. Setup and Installation

Unboxing and Overview

Video: Unboxing and installation guide for the Retekess TD004 Call Button, demonstrating antenna extension and base attachment.

Front view of Retekess TD004 call button

Image: Front view of the Retekess TD004 call button with 'CALL' and 'CANCEL' buttons and an extendable antenna.

Top view of Retekess TD004 call button with extended antenna

Image: Top-down view of the Retekess TD004 call button with its antenna extended.

Installation Preparation

  1. Unscrew the battery compartment cover on the back of the device.
  2. Insert one 12V/23A battery, ensuring the positive terminal is facing up.
  3. Tighten the battery compartment cover securely.
  4. Select a flat, dry mounting surface. Clean the surface thoroughly to ensure optimal adhesion.
  5. The TD004 offers two installation methods:
    • Adhesive Mounting: Peel off the protective film from the high-adhesion adhesive backing on the device's base and firmly attach the call button to the prepared surface.
    • Screw Mounting: Use the provided base to mark and drill holes in the wall, then fix the base and the call button with screws.
Two installation methods for the call button

Image: Visual guide for two installation methods: using double-sided adhesive tape and fixing with screws to a wall.

Device Pairing

The TD004 needs to be paired with a compatible call host (receiver) to function. Follow these steps:

  1. Ensure your call host is in pairing mode (refer to your call host's manual for specific instructions).
  2. Press and hold the 'CALL' button on the TD004 for approximately 5 seconds.
  3. The indicator light on the TD004 will flash rapidly, indicating that the device has entered pairing mode.
  4. Once the call host displays "Pairing Successful," the indicator light on the TD004 will turn off, completing the pairing process.

3. Operating Instructions

Call Operation

To send a call signal:

  1. Briefly press the 'CALL' button on the front of the TD004.
  2. The LED indicator light will flash, signifying that a call signal has been sent to the paired call host.
  3. The LED light will automatically turn off once the call is acknowledged or answered by the call host.
Restaurant scenario using call button and pager watches

Image: Diagram illustrating the use of the call button in a restaurant setting, with a chef calling a waiter wearing a pager watch.

4. Maintenance

Battery Replacement

If the indicator light does not illuminate or flashes weakly after pressing the button, the battery is low and needs replacement.

  1. Unscrew the battery compartment cover on the back of the device.
  2. Remove the old 12V/23A battery.
  3. Insert a new 12V/23A battery, ensuring correct polarity (positive terminal up).
  4. Tighten the battery compartment cover securely.

Cleaning

Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.

Water Resistance

The TD004 has an IPX3 waterproof rating, meaning it is protected against spraying water. It is suitable for environments where it might encounter light splashes, but it is not designed for submersion or heavy water exposure.

Call button with water splashing on it, demonstrating IPX3 waterproof rating

Image: Demonstrating the IPX3 waterproof rating of the call button, with water splashing on it.

5. Troubleshooting

  • Device not responding: Check if the battery is correctly installed and has sufficient charge. Replace the battery if necessary.
  • Call signal not reaching receiver: Ensure the device is within the effective transmission range (up to 250 meters in open areas). Obstacles like thick walls can reduce range. Re-pair the device with the call host if connection issues persist.
  • Indicator light not flashing: This usually indicates a low battery. Replace the battery.

6. Specifications

Brand Name Retekess
Model Number TD004
RF Frequency 433MHz
Modulation Mode ASK (AM)
Material ABS
Power 12V/23A battery (included)
Waterproof Rating IPX3
Size 96 x 42 x 15mm
Weight 60g
Certification CE, FCC
Origin Mainland China
Transmission Distance Approx. 250 meters (open area)
Battery Life Approx. 6000 cycles per battery
Diagram showing 250 meter transmission range through walls

Image: Diagram illustrating the signal transmission range of approximately 250 meters in an open area, and how the signal can pass through multiple walls to a pager watch.

7. Precautions

  • Avoid direct sunlight or high-temperature, humid environments during installation and operation.
  • Do not press or drop the device forcefully to avoid damaging internal components.
  • Ensure the battery is installed correctly with the positive and negative terminals aligned to avoid short circuits.
  • When not in use for extended periods, remove the battery to prevent leakage and potential damage to the device.

8. User Tips

  • Optimal Placement: For best signal transmission, try to place the call button in a location with minimal obstructions between it and the receiver.
  • Regular Checks: Periodically check the indicator light to ensure the battery is not low, especially in high-usage environments.
  • Antenna Usage: Extend the antenna fully for maximum range and signal stability.

9. Support and Contact

For further assistance, please refer to the official user manual PDF or contact Retekess customer support.

Manufactured by Henan Eshow Electronic Commerce Co., Ltd, Mainland China.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.