1. Introduction and Safety Information
Thank you for choosing this professional LED light. We are confident that our products and services will meet your expectations. For your safety and to ensure proper operation, please read this user manual carefully before installing or operating the device.
General Safety Precautions
- CAUTION: It is forbidden to use this device in thunderstorm weather.
- Prohibit the blisters!
- Work temperature range: -20°C to 45°C.
- Unplug the mains lead before opening the housing or performing any maintenance.
- Installation and operation should be carried out by certified technicians.
- Strictly follow all instructions provided in this manual.
Qualified Personnel
Every person involved with the installation, operation, and maintenance of this device must be qualified and follow the instructions in this manual carefully.
2. Unpacking and Package Contents
Please check the device carefully for any shipping damage immediately upon receipt. If any damage is found, do not install the device and contact us for after-sales consultation.
What's in the Box:
- 1 x Stage Light
- 1 x Power Cable (1.2m)
- 1 x Instruction Manual
- 1 x Double-bracket yoke (doubles as floor stand)
- 2 x Screws
3. Mounting and Installation
3.1. Cautions for Installation
- For added protection, install fixtures outside walkways, seating areas, or areas where unauthorized persons may come into contact with fixtures.
- Before mounting the luminaire to any surface, ensure that the mounting area can withstand a minimum point load of 10 times the weight of the unit.
- Clamp installations must always be secured using secondary safety accessories such as appropriate safety cables.
- Never stand directly beneath the unit when installing, removing, or servicing the light fixture from the ceiling or when setting it up on a flat, level surface.
- Make sure the fixture is at least 0.5m (1.5ft) away from any flammable objects (decorations, etc.).
3.2. Mounting Points
Overhead installation requires extensive experience, including calculation of working load limits, in-depth knowledge of the installation materials used, and regular safety inspections of all installation materials and fixtures. If you lack these qualifications, do not attempt to install it yourself, as improper installation may result in personal injury.
Be sure to complete all fitting and installation procedures before connecting the mains power cord to a suitable wall outlet.
4. DMX-512 Control Connection
Connect the supplied XLR cable to the 3-pin XLR female output of the controller and the other end to the 3-pin XLR male input of the moving head. Multiple moving heads can be chained together via a serial link. The required cable should be a two-conductor shielded cable with XLR input and output connectors.
Refer to the diagram below for DMX connection details:

DMX Pin Configuration:
- Pin 1: Ground
- Pin 2: Data -
- Pin 3: Data +
5. Operating Instructions
5.1. LCD Digital Display and Key Functions
The device features a 4-digit LED display and four push buttons for control and settings adjustment.

| Key-press | Description |
|---|---|
| MENU | DMX control/color selection/color transformation/color transition/color flash/sound control/color brightness setting. |
| UP | Increase values |
| DOWN | Decrease values |
| ENTER | Confirm button. After pressing this button, all setting values will be saved. |
5.2. Digital Show Function Form
Use the MENU, UP, DOWN, and ENTER buttons to navigate and select the desired functions and values.
| No | Show | Function | Value | Instruction |
|---|---|---|---|---|
| 1 | d001 | DMX address | 001~512 | 6CH mode, UP, DOWN increase or reduce the value |
| 2 | A001 | DMX address | 001~512 | 10CH mode UP, DOWN increase or reduce the value |
| 3 | r255 | Red dim | 000~255 | UP, DOWN Change brightness |
| 4 | G255 | Green dim | 000~255 | UP, DOWN Change brightness |
| 5 | b255 | Blue dim | 000~255 | UP, DOWN Change brightness |
| 6 | u255 | White dim | 000~255 | UP, DOWN Change brightness |
| 7 | y255 | Amber dim | 000~255 | UP, DOWN Change brightness |
| 8 | P255 | Ultraviolet dim | 000~255 | UP, DOWN Change brightness |
| 9 | FH99 | Strobe | 01~99 | UP, DOWN change the speed |
| 10 | CL01 | Colors choose | 01~08 | UP, DOWN Change color |
| 11 | CC99 | Colors Jump | 01~99 | UP, DOWN change the speed |
| 12 | DE99 | Colors Gradate | 01~99 | UP, DOWN change the speed |
| 13 | CP99 | Colors Pulse | 01~99 | UP, DOWN change the speed |
| 14 | SU01 | Colors sound-Active | 01-09 | UP, DOWN Change the effects |
5.3. DMX Channels
The LED Par Light supports both 6-channel and 10-channel DMX modes.
6 Channels Mode
| Channel | Function | Instruction |
|---|---|---|
| CH1 | R Dimmer | Red Dimmer - Dark to Bright |
| CH2 | G Dimmer | Green Dimmer - Dark to Bright |
| CH3 | B Dimmer | Blue Dimmer - Dark to Bright |
| CH4 | W Dimmer | White Dimmer - Dark to Bright |
| CH5 | A Dimmer | Amber - Dark to Bright |
| CH6 | U Dimmer | Ultraviolet - Dark to Bright |
10 Channels Mode
| Channel | Function | Instruction |
|---|---|---|
| CH1 | Total Dimmer | RGBW Total Dimmer - Dark to Bright |
| CH2 | R Dimmer | Red Dimmer - Dark to Bright |
| CH3 | G Dimmer | Green Dimmer - Dark to Bright |
| CH4 | B Dimmer | Blue Dimmer - Dark to Bright |
| CH5 | W Dimmer | White Dimmer - Dark to Bright |
| CH6 | A Dimmer | Amber - Dark to Bright |
| CH7 | U Dimmer | Ultraviolet - Dark to Bright |
| CH8 | Total Strobe | RGBW Total Flash Strobe - Slow to Fast |
| CH9 | Function Choice | 000~050: CH1-CH8 Control. 051~100: Different Colors output 101~150: Colors Jump Change. 151~200: Colors Gradate. 201~250: Colors Pulse Change. 251-255: Sound-Active |
| CH10 | Function/Speed | Slow to Fast (At the Colors output and sound choose the color) |
5.4. Control Modes
The LED Par Light supports multiple control modes:
- DMX512: For professional control via a DMX controller.
- Master/Slave: Link multiple units for synchronized operation.
- Sound Active: Lights react to sound/music.
- Auto Run: Pre-programmed light shows.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your LED Par Light.
- Cleaning: Periodically clean the lens and housing with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals.
- Inspection: Regularly inspect all cables, connections, and mounting hardware for any signs of wear, damage, or looseness.
- Cooling Fan: Ensure the cooling fan is free from obstructions to prevent overheating. The light features a durable metal body and cooling fan to prevent overheating.
- Power Cord: Check the power cord for any cuts or damage. Replace immediately if damaged.
- Fuse: The device includes a fuse for protection. If the light does not power on, check and replace the fuse if necessary.
7. Troubleshooting
If you encounter issues with your LED Par Light, refer to the following common troubleshooting steps:
- No Power:
- Check if the power cable is securely connected to both the light and the power outlet.
- Verify the power outlet is functional.
- Check the fuse on the back panel and replace if blown.
- No Light Output:
- Ensure the dimmer settings are not at 0%.
- Check the selected control mode (DMX, Auto, Sound, Master/Slave) and ensure it is correctly configured.
- If using DMX, verify DMX connections and address settings.
- Incorrect Colors/Effects:
- In DMX mode, check your DMX controller settings and channel assignments.
- In Auto or Sound mode, try cycling through different programs using the MENU button.
- Overheating:
- Ensure the cooling fan is not obstructed and is functioning properly.
- Operate the light within the recommended temperature range (-20°C to 45°C).
8. Specifications

| Parameter | Value |
|---|---|
| Model Number | HYU-18LED-PAR |
| Input Voltage | AC90V-240V, 50-60Hz |
| LED Quantity | 24PCS 18W High Power LEDS |
| Light Source Options | 24 x 18W RGBWA UV 6in1 LEDs 24 x 12W RGBW 4in1 LEDs |
| Dimming | 0-100% smooth dimming |
| Material | Aluminum (Cast aluminum chassis, honeycomb design) |
| Color | Black (16.7 million kinds of color change) |
| Lens Angle | 40 degrees |
| Strobe | 1-25 times/second (any color) |
| Control Modes | DMX512, Master/Slave, Sound Active, Auto Work |
| DMX Channels | 6/10 CH |
| Power Cable | Power In/Out |
| DMX Interface | DMX In/Out |
| Waterproof Type | Indoor using |
| Net Weight (N.W) | 2.3 KG |
| Gross Weight (G.W) | 2.8 KG |
| Packing Size | 25cm x 25cm x 13cm |
| Luminous Flux | 2000-82000 |
| Installation Method | Self-contained (Double-bracket yoke doubles as floor stand) |
| Certifications | CE, RoHS |
9. User Tips
- For the best effect, pair this product with a fog machine to enhance beam visibility.
- While the housing is thick aluminum, ensure proper ventilation as the LED board may not have direct thermal contact with the entire housing for heat dissipation.
- Note that the actual power output of the LEDs may be lower than the stated 18W, typically around 10W per LED.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.