LAUNCH CRP123X V2.0

Contents

LAUNCH X431 CRP123X V2.0 OBD2 Diagnostic Tool User Manual

Model: CRP123X V2.0 | Brand: LAUNCH

1. Introduction

The LAUNCH X431 CRP123X V2.0 is an advanced smart diagnostic solution designed for passenger cars. It integrates LAUNCH's extensive diagnostic technology to provide powerful functions and precise test results across a wide range of vehicles. This tool is equipped to handle diagnostics for Engine, Transmission, ABS, and SRS systems, offering lifetime free updates via Wi-Fi and supporting multiple languages.

2. Safety Precautions and Warnings

To prevent personal injury or damage to vehicles and/or this tool, please read this user's manual carefully and observe the following safety precautions at a minimum whenever working on a vehicle:

  • Always perform automotive testing in a safe environment.
  • Do not attempt to operate or observe the tool while driving a vehicle. Operating or observing the tool will cause driver distraction and could cause a fatal accident.
  • Wear safety eye protection that meets ANSI standards.
  • Keep clothing, hair, hands, tools, test equipment, etc., away from all moving or hot engine parts.
  • Operate the vehicle in a well-ventilated work area: Exhaust gases are poisonous.
  • Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
  • Use extreme caution when working around the ignition coil, distributor cap, ignition wires, and spark plugs. These components create hazardous voltages when the engine is running.
  • Put the transmission in P (for A/T) or N (for M/T) and make sure the parking brake is engaged.
  • Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.
  • Don't connect or disconnect any test equipment while the ignition is on or the engine is running.
  • Keep this tool dry, clean, free from oil/water or grease. Use a mild detergent on a clean cloth to clean the outside of the tool, when necessary.
  • Please use the DC 5V power adaptor to charge this tool. No responsibility can be assumed for any damage or loss caused as a result of using power adaptors other than the right one.

3. Setup

3.1 Package Contents

The package for your LAUNCH X431 CRP123X V2.0 diagnostic tool should contain the following items:

  • 1 x Creader Professional 123X Handset
  • 1 x OBD II Diagnostic Cable
  • 1 x DC 5V Charging Cable
  • 1 x User Manual (PDF available online)
  • 1 x Carrying Bag
Package contents of LAUNCH CRP123X V2.0 including the diagnostic tool, cables, and carrying bag.
Figure 3.1: LAUNCH CRP123X V2.0 Package Contents

3.2 Tool Overview

The LAUNCH CRP123X V2.0 features a robust design with a 5-inch touchscreen and easy-to-use buttons for navigation. Key components and controls are:

Diagram showing the components of the LAUNCH CRP123X V2.0: Power On/Off button, DB-15 Diagnostic Connector, 5V Charging Port, Charging LCD, Main LCD screen, Home Button, Left/Up/Right/Down navigation buttons, OK button, and Return button.
Figure 3.2: LAUNCH CRP123X V2.0 Product Layout
  1. Power On/Off: Button to turn the device on or off.
  2. DB-15 Diagnostic Connector: Port for connecting to the vehicle's DLC.
  3. 5V Charging Port: For external DC power charging.
  4. Charging LCD: Indicates charging status (Red for charging, Green for fully charged).
  5. LCD: Main display screen for test results and menu navigation.
  6. Home Button: Returns to the main Job Menu.
  7. Left Button: Navigation control.
  8. Up Button: Navigation control.
  9. Right Button: Navigation control.
  10. Down Button: Navigation control.
  11. OK Button: Confirms selections or actions.
  12. Return Button: Exits current program or returns to the previous screen.

3.3 Charging the Tool

The tool can be charged using two methods:

  • Via Charging Cable: Plug one end of the included DC 5V charging cable into the tool's 5V Charging Port and the other end into an external DC power source.
  • Via Diagnostic Cable: Connect the diagnostic cable to the tool's DB-15 connector and the vehicle's DLC. The tool will charge from the vehicle's power.

The Charging LCD will illuminate solid green when the battery is fully charged.

3.4 Initial Setup (Getting Started)

Upon first use, you will need to configure some system settings:

  1. Power On: Press the [Power] button for about 5 seconds to turn on the handset.
  2. Language Selection: The screen will display a welcome page. Tap "Start", then choose your desired system language (e.g., English, Spanish, French, German, Italian, Russian, Japanese, Korean, Portuguese) and tap "Next".
  3. Screenshot of the language selection screen on the LAUNCH CRP123X V2.0, showing options like English, Español, Français, Deutsch, Italiano, and Русский.
    Figure 3.3: Language Selection Screen
  4. Network Setup: Choose your desired time zone and tap "Next". On the WLAN setup page, slide the switch to ON. The system will search for available wireless networks. Select your network and enter the password if it's encrypted.
  5. Email Configuration: After network connection, tap "Next Step" to input your email address. This allows diagnostic reports to be automatically sent to your inbox.
  6. User Agreement: Read the terms and conditions, check the "Agree to all the above terms" box, and tap "OK" to finish the sign-up process and navigate to the Job Menu.

3.5 Connecting to the Vehicle

  1. Turn Ignition Off: Ensure the vehicle's ignition is off before connecting.
  2. Locate DLC: Find the vehicle's Data Link Connector (DLC). It is typically a 16-pin connector located on the driver's side, about 12 inches from the center of the dashboard. If not under the dashboard, a label should indicate its location.
  3. Diagram illustrating the connection of the Creader Professional 123X to a vehicle's DLC (Data Link Connector).
    Figure 3.4: Connecting to Vehicle's DLC
  4. Connect Diagnostic Cable: Plug one end of the diagnostic cable into the tool's DB-15 connector and tighten the captive screws. Connect the other end to the vehicle's DLC.

4. Operating Instructions

4.1 Job Menu Overview

The main Job Menu provides access to the following function modules:

  • Diagnose: Configures the tool for professional diagnostic operations.
  • I/M: Quick access to I/M Readiness function for emissions-related system checks.
  • OBD II: Presents a quick way to check for DTCs, isolate MIL causes, check monitor status, and verify repairs.
  • Battery Voltage: Measures and graphs the current voltage of the vehicle's battery.
  • Update: Updates diagnostic software and APK online via Wi-Fi.
  • Data: Includes Diagnostic Report, Diagnostic Record, Feedback, and DTC Library.
  • Settings: Allows system settings configuration, including Network setup, Email, and Display/Brightness.

4.2 System Diagnosing

This function is specifically designed to diagnose electronic control systems of a single vehicle model.

4.2.1 Smart Diagnosis (Auto-Detect)

Once connected to the vehicle and the ignition is on, the system can automatically detect the Vehicle Identification Number (VIN) and initiate a diagnostic scan. A diagnostic report will be generated and sent to your email address (if configured). Ensure "Automatic detection on connect" is set to ON in Settings for this feature.

Image showing the AutoDetect VIN feature of the LAUNCH CRP123X V2.0, with a magnifying glass scanning a VIN barcode and a wireframe car model.
Figure 4.1: Auto-Detect VIN Feature

4.2.2 Manual Diagnosis

If auto-detect fails, manual diagnosis is available. You can manually select the vehicle model and test system. Follow the on-screen instructions to proceed with functions like reading version information, reading/clearing fault codes, and reading data streams.

4.3 OBDII Diagnosis

The tool supports 10 modes of OBD II tests, including EVAP, O2 Sensor, I/M Readiness, MIL Status, VIN Info, and On-board monitors testing. This allows for comprehensive emission-related diagnostics.

  • Read Codes (DTCs): Displays detailed information of Diagnostic Trouble Codes retrieved from the vehicle's control system.
  • Clear Codes: Erases DTCs from the vehicle after repairs. Ensure the ignition is ON and the engine is OFF before clearing codes.
  • I/M Readiness: Indicates whether emission-related systems have completed their diagnostic tests.
  • View Freeze Frame: Records vehicle operating parameters at the time an emission-related fault occurs.
  • O2 Sensor Test: Displays results of the ECU's last O2 sensor test.
  • On-board Monitor Test: Reads results of on-board diagnostic monitoring tests for specific components/systems.
  • EVAP System Test: Initiates a leak test for the vehicle's EVAP system.
  • Vehicle Info: Displays vehicle information such as VIN, CID (Calibration ID), and CVN (Calibration Verification Number).
  • Data Stream (Live Data): Retrieves and displays live data and parameters from the vehicle's ECU. Data can be viewed in values or waveform graphs.
Video 4.1: Overview of LAUNCH CRP123X V2.0 features, including touchscreen, ports, anti-slip design, Android OS, VIN auto-detect, one-click updates, live data graphing, system diagnostics, and wide vehicle compatibility.
Graph displaying real-time battery voltage over time, showing a stable voltage around 12.5V.
Figure 4.2: Battery Voltage Testing and Graphing

4.4 Four System Diagnosis

The CRP123X V2.0 provides comprehensive diagnostics for the following four core vehicle systems:

  • Engine System: Read and clear check engine light codes, view real-time data for sensors, switches, and relay inputs.
  • Antilock Braking System (ABS): Access and perform diagnostics on ABS, locate error codes, and turn off fault lights.
  • Airbag System (SRS): Supports Supplementary Restraint System diagnosis, reading codes to help solve issues and remind of maintenance.
  • Auto Transmission System: Supports reading/erasing codes, viewing live data, and turning off warning lights in the transmission system.
Image showing the LAUNCH CRP123X V2.0 performing diagnostics, with icons for Engine, Transmission, SRS, and ABS systems highlighted.
Figure 4.3: Four Systems Diagnoses

4.5 Reset Functions

The tool offers several reset services to assist with vehicle maintenance:

4.5.1 7 Free Reset Services (Lifetime Update)

  • RESET ETS (Electronic Throttle System)
  • RESET OIL (Oil Lamp Reset)
  • RESET SAS (Steering Angle Sensor Reset)
  • RESET BLEED (ABS Bleeding)
  • RESET BMS (Battery Management System Reset)
  • RESET BRAKE (Electronic Parking Brake Reset)
  • RESET DPF (Diesel Particulate Filter Regeneration)

4.5.2 14+ Optional Reset Services (Available for Purchase)

Additional reset services can be purchased on the device, including but not limited to:

  • Reset Gear
  • Reset IMMO (Immobilizer)
  • Reset Injec (Injector Coding)
  • Reset TPMS (Tire Pressure Monitoring System Reset)
  • SUS Reset (Suspension Reset)
  • AFS Reset (Adaptive Front-lighting System Reset)
  • SUN ROOF (Sunroof Reset)
  • Gearbox Learn
  • EGR Adaption
  • A/C Relearn
  • Intelligent Cruise Control
  • Engine Power Balance Monitoring
  • High Voltage Battery Diagnostics
  • GPF Regeneration

5. Maintenance

5.1 Software Update

The LAUNCH CRP123X V2.0 supports one-click software updates via Wi-Fi. It is highly recommended to update the diagnostic software and APK regularly to ensure access to the latest functions and vehicle compatibility.

  1. Tap "Upgrade" on the Job Menu to enter the update center.
  2. By default, all diagnostic software is selected. You can deselect specific software if needed.
  3. Tap "Update" to start downloading. Ensure a stable network connection.
  4. Once the download is complete, the software packages will be installed automatically.
Image showing the LAUNCH CRP123X V2.0 screen with 'Upgrade' and 'Data' options, indicating Wi-Fi updates and inspection report generation capabilities.
Figure 5.1: Wi-Fi Updates and Inspection Report

5.2 Firmware Fix

Use this option to upgrade and fix diagnostic firmware. During the fixing process, do not cut power or switch to other interfaces.5.3 Clean Up

This option allows users to clear cache files and free up storage space on the device.

5.4 Recovery

This feature allows you to reset the tool to its default factory settings. Warning: Resetting may cause data loss. Be careful when performing this operation.

6. Troubleshooting (FAQ)

  • System halts when reading data stream: This may be caused by a slackened connector. Turn the tool off, firmly connect the connector, and switch it on again.
  • Screen of main unit flashes at engine ignition start: This is a normal phenomenon caused by electromagnetic disturbance.
  • No response when communicating with on-board computer: Confirm the proper voltage of the power supply. Check if the throttle has been closed, the transmission is in neutral, and the water is at the proper temperature.
  • What to do if the system fails to start auto VIN detection? Check if the tool is properly connected to the vehicle's DLC and if the "Automatic detection on Connect" switch is ON in the settings.
  • Why are there so many fault codes? Usually, this is caused by poor connection or fault circuit grounding.
  • What if the tool cannot be switched on even after a period of recharging? Recharge it for at least 3 hours until the power LED lights up, then it should switch on.

7. Specifications

FeatureSpecification
Operation SystemAndroid 8.1
Display Size5-inch Touch Screen
RAM1G
ROM32GB
Battery6100mAh rechargeable Li-battery
OBD II Input Voltage Range9~18V
ChargingDC 5V charging cable or Diagnostic cable via vehicle's DLC
Dimensions228mm x 125mm x 34.5mm
Working Temperature-10 to 50°C (14 to 122°F)
Storage Temperature-20 to 70°C (-4 to 158°F)
Communication InterfaceOBD-II
Wireless SupportWi-Fi
Software UpdateLifetime Free Update via Wi-Fi
Supported LanguagesSpanish, German, Italian, French, Russian, Korean, Japanese, English, Portuguese
CertificationsCE, FCC, RoHS
FCC IDXUJCRP123XV3

8. Warranty and Support

8.1 Warranty Information

LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty does not cover parts that have been abused, altered, used for a purpose other than intended, or used in a manner inconsistent with instructions regarding use. The exclusive remedy for any defective automotive meter is repair or replacement.

8.2 Customer Service

If you have any questions regarding the operation of the unit, please contact your local dealer or LAUNCH TECH CO., LTD. directly:

LAUNCH reserves the right to make any changes to this manual without notice. While every effort has been made to ensure accuracy, defects are inevitable. For any questions, please contact customer support.

9. User Tips

  • The LAUNCH CRP123X V2.0 is confirmed to be a genuine and original product.
  • Free lifetime updates are performed directly through the 'Update' icon on the main menu, accessible via Wi-Fi.
  • The tool is capable of resetting error codes and turning off warning lights.
  • The device requires charging, even when connected to the OBD port, to maintain optimal performance.
  • It supports a wide range of vehicle models (over 10,000) and 57+ car brands, including many popular Asian, European, and American manufacturers.
  • The device supports multiple languages, including English, Spanish, French, German, Italian, Russian, Japanese, Korean, and Portuguese.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.