Signal Fire AI-9, AI-5, AI-6A+, AI-20, AI-30

Contents

Signal Fire Optical Fiber Fusion Splicer User Manual

Models: AI-9, AI-5, AI-6A+, AI-20, AI-30

1. Introduction

The Signal Fire Optical Fiber Fusion Splicer is a high-precision instrument designed for splicing optical fibers in various applications, including trunk line construction, FTTH projects, and security monitoring. This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your fusion splicer.

The AI-9 model is a fully automatic, mainline fiber optical splicer featuring six motors for fiber core alignment. It includes built-in VFL (Visual Fault Locator) and OPM (Optical Power Meter) functions. Equipped with an industrial-grade CPU, it offers fast 5-second fusion welding and 15-second rapid heating. The 5-inch color touchscreen provides 320X magnification for precise work. Its large-capacity lithium battery supports approximately 260 fusion and heating cycles, ensuring outstanding performance even in harsh environments like high altitudes, deserts, and extreme cold.

AI-9 Optical Fiber Fusion Splicer
Signal Fire AI-9 Optical Fiber Fusion Splicer, suitable for medium to long-distance trunk fiber optic cable fusion projects.

2. Safety Information

Please read and understand all safety warnings and instructions before operating this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

General Safety Precautions:

  • Use the device only for its intended purpose as described in this manual.
  • Keep the device away from water and moisture. Do not operate in wet conditions.
  • Ensure the power supply matches the device's requirements (AC100-240V 50/60HZ, Output DC13.5V/4A).
  • Do not open or attempt to repair the device yourself. Refer all servicing to qualified personnel.
  • Handle optical fibers with care. Avoid direct eye exposure to laser light from VFL or other optical sources.
  • Keep the work area clean and well-lit.
  • Avoid operating the device in environments with strong electromagnetic interference.

3. Package Contents

Verify that all items listed below are included in your package. Contents may vary slightly depending on the specific model (AI-9, AI-5, AI-6A+, AI-20, AI-30) and configuration purchased.

Standard Configuration Accessories
Standard Configuration for Signal Fire Fusion Splicer (AI-9 shown).

Standard Accessories:

  1. Fusion Splicer (Main Engine)
  2. Toolcase (often doubles as a stool)
  3. Spare Electrode
  4. Fiber Cleaver (S09 for AI-9, S07 for AI-5/AI-6A+)
  5. Signal Fire Stripper (includes Kevlar scissors, three-port Miller stripper, rotary ruler, FTTH drop cable steel wire pliers, cleaning cotton)
  6. Alcohol Bottle
  7. Allen Wrench
  8. Brush
  9. Climbing Combination / Toolbox Strap
  10. Belt
  11. Power Adapter
  12. User's Manual / Quality Certificate / Warranty Card / Fiber for ARC calibration

Note: The Signal Fire stripper is designed for various fiber types, including 5G FTTH Drop cable (2mm x 1.6mm) and regular FTTH Drop cable (3mm x 2mm). It is not designed to cut FRP steel wire or other steel wires, as this may damage the blade.

Signal Fire Stripper with multiple functions
The Signal Fire stripper, a multi-functional tool included with the splicer.

4. Product Overview

The Signal Fire fusion splicer is designed for ease of use and high performance. Below is an overview of its main components and features.

Key Features:

  • Six Motors Core Alignment: Ensures precise fiber alignment for minimal splice loss.
  • Fast Splicing & Heating: 5 seconds for splicing, 15 seconds for heating (AI-9).
  • 5-inch TFT Color Display: Provides clear visual feedback with 320X magnification.
  • Built-in VFL & OPM: (AI-9, AI-20, AI-30 models) For measuring connection losses, verifying continuity, and assessing fiber link transmission quality.
  • 3-in-1 Universal Fixture: Accommodates SM, MM, bare fiber, pigtail, drop cable, and multi-fiber cable without needing to change fixtures.
  • Automatic Lid Closing & Heating: Simplifies the splicing process.
  • Expandable Cooling Rack: For efficient cooling of spliced fibers.
  • Protective Case: Durable design for field use.
  • Large Capacity Lithium Battery: 7800mAh (AI-9) or 5200mAh (AI-5 PRO, AI-6A+) for extended operation.
AI-9 Detailed Diagram
Detailed view of the AI-9 Fusion Splicer components.

Control Panel & Ports:

AI-9 Control Buttons
The buttons on the AI-9 are clearly labeled for easy operation.
  • OPM VFL Power Switch: Activates the Optical Power Meter and Visual Fault Locator.
  • Manual Changing of Blade: For cleaver blade adjustment.
  • Reset Key: Resets settings or operations.
  • Continue Key: Proceeds with the current operation.
  • Zoom In Key: Magnifies the display.
  • Machine Power Key: Turns the device on/off.
  • VFL Port: For Visual Fault Locator (AI-9, AI-20, AI-30).
  • OPM Port: For Optical Power Meter (AI-9, AI-20, AI-30).
  • Charging Channels: Dual charging channels for the battery.
AI-9 VFL and OPM Ports
AI-9 with built-in VFL and OPM functions.

5. Setup

5.1. Charging the Battery

The splicer is powered by a large-capacity lithium battery. Ensure the battery is fully charged before use.

  • Connect the power adapter to the splicer's charging channel.
  • The charging time is approximately 3.5 hours.
  • A fully charged battery can perform about 260 fusion and heating cycles.
  • The battery can be removed and charged separately using the dedicated charging channel.
AI-9 Battery Charging
The 7800mAh lithium battery can be charged via dual channels.

5.2. Language Selection

The device supports multiple languages for global users.

  • Navigate to the 'Language' setting in the touch screen menu.
  • Select your preferred language from the available options (e.g., Chinese, English, French, Russian, Italian, Portuguese, Polish, Spanish, Thai, Arabic).
AI-9 Language Selection
The touch screen menu allows free switching between 11 languages.

5.3. Bluetooth Connection (Mobile APP)

The splicer can connect to a mobile application via Bluetooth for enhanced functionality.

  • Scan the QR code displayed on the welding machine's startup screen to download the mobile APP.
  • Connect your phone to the splicer via Bluetooth.
  • Through the app, you can read welding records, export data, set parameters (heating time, fiber optic alignment mode), manage the machine's usage time and welding count, and upgrade the machine software.
AI-9 Bluetooth Connection
Intelligent interaction via Bluetooth connection to the mobile app.

6. Operation

6.1. Fiber Preparation and Cleaving

  1. Strip the fiber coating using the provided fiber stripper.
  2. Clean the bare fiber with an alcohol wipe.
  3. Place the fiber in the fiber cleaver and cleave it to the correct length.
Video demonstrating fiber cleaving and splicing process.

6.2. Fiber Splicing

  1. Open the splicer lid and place the prepared fibers into the V-grooves of the 3-in-1 universal fixture. Ensure the fibers are seated correctly.
  2. Close the lid. The splicer will automatically align the fibers and initiate the fusion process.
  3. The 5-inch display will show the alignment process and the splice loss.
  4. Once splicing is complete, the heating element will automatically activate to shrink the protection sleeve.
AI-9 3-in-1 Universal Fixture
The 3-in-1 universal fixture supports various fiber types.

6.3. Using VFL (Visual Fault Locator)

The VFL function helps identify breaks or bends in the fiber optic cable.

  1. Connect the fiber to the VFL port.
  2. Press the OPM VFL power switch to activate the VFL.
  3. The VFL operates at 15mW power with 2Hz flashing and steady on modes.
  4. Observe the fiber for red light leakage, indicating faults.

6.4. Using OPM (Optical Power Meter)

The OPM measures the optical power of the fiber signal.

  1. Connect the fiber to the OPM port.
  2. Press the OPM VFL power switch to activate the OPM.
  3. The OPM supports various wavelengths: 850nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 980nm, 1270nm, 1577nm, 1650nm.
  4. The measurement range is -50 to +26dBm with an absolute error of <0.3dB.

7. Maintenance

7.1. Cleaning

  • Regularly clean the V-grooves, electrodes, and optical components with alcohol and cleaning cotton swabs to ensure optimal performance.
  • Keep the splicer free from dust and debris. The device features dust prevention mechanisms.

7.2. Electrode Replacement

Electrodes are consumable parts and need to be replaced periodically. The device provides a function to track electrode usage.

  • Access the 'Replace blade assembly' option in the configuration menu (page 8 of manual).
  • Follow the on-screen instructions or refer to the detailed user manual for safe replacement.

7.3. Cleaver Blade Maintenance

The fiber cleaver blade surface automatically changes when the current cutting point has been used over 1000 times. Manual blade changes are also possible. The cleaver has 24 cutting points in total.

Fiber Cleaver Blade Change
Automatic and manual cleaver blade changes.

8. Troubleshooting

This section addresses common issues you might encounter with your fusion splicer.

Common Issues and Solutions:

  • High Splice Loss:
    • Ensure fibers are clean and properly cleaved.
    • Check for proper fiber alignment in the V-grooves.
    • Replace worn-out electrodes.
    • Perform ARC calibration.
  • Splicer Not Powering On:
    • Check battery charge level.
    • Ensure power adapter is correctly connected and functioning.
  • Display Issues:
    • Restart the device.
    • Check screen brightness settings.
  • Bluetooth Connection Failure:
    • Ensure Bluetooth is enabled on both the splicer and your mobile device.
    • Restart the app and the splicer.
    • Verify the app is up to date.
  • Fiber Cleaver Blade Scratches/Traces:
    • This is normal and does not influence performance. Avoid cutting steel wires.

9. Specifications

The following table outlines the basic parameters for the Signal Fire Optical Fiber Fusion Splicers. Note that specifications may vary slightly between models (AI-9, AI-5, AI-6A+, AI-20, AI-30).

Basic Parameter Table
Basic parameters for Signal Fire Fusion Splicers (AI-9 shown).
ParameterDescription (AI-9)
Fiber alignmentCore/cladding
Motor number6 motors (accurate of fiber alignment: 0.1µm)
Splicing time5s
Heating time15s (can be customized)
Fiber typeSMF/G.652, MMF/G.651, DSF/G.653, G.654 fiber, NZ-DSF/G.655, BIF/G.657
Cladding diameter80-150 µm
Splice loss0.02dB (SM), 0.01dB (MM), 0.04dB (DS/NZDS)
Splicing modeAutomatic focusing core alignment, conventional/high precision welding
Splicing wayAutomatic, semi-automatic
Fiber holder3-in-1 fixture (no need to change)
VFLBuilt-in (15mW, 2Hz flashing and steady on mode)
OPMBuilt-in (850nm-1650nm, -50 to +26dBm)
Battery capacity7800mAh (AI-9), 5200mAh (AI-5 PRO, AI-6A+); ~260 cores fusion/heating
Magnification320x (X or Y axis single), 200x (X and Y axis dual)
Display5-inch color touchscreen
Data storageUnlimited, machine storage 1000 groups, exportable
Wireless communicationBluetooth 4.2, 2.4GHz, max 60m range
Power supplyInput AC100-240V 50/60Hz, Output DC13.5V/4.8A
Work environment-15 ~ +50°C, <95%RH (no condensation), 0-5000m altitude, <15m/s wind speed
Product protectionWaterproof, dustproof and fall proof

Physical Dimensions & Weight (AI-9):

AI-9 Size and Weight
Dimensions and weight of the AI-9 Fusion Splicer and its toolbox.
  • Machine weight: 2.10kg (with battery), 1.68kg (without battery)
  • Toolbox weight: 6.95kg (including machine and accessories)
  • Total weight: 8.20kg
  • Machine dimensions: 198mm (W) x 122mm (H) x 135mm (D)
  • Toolbox dimensions: 270mm (W) x 293mm (H) x 237mm (D)
  • Package dimensions: 330mm (W) x 370mm (H) x 310mm (D)

10. User Tips

  • Efficiency: Many users report that the machine pays for itself quickly due to its efficient operation.
  • Accessories: The included toolbox and accessories are generally of good quality and durable, making it a complete kit to start working.
  • Model Differences: Be aware that AI-5 and AI-6A+ models typically do not include built-in VFL and OPM functions, unlike the AI-9, AI-20, and AI-30. The AI-9 also comes with an S09 cutting knife, while AI-5/AI-6A+ come with an S07.
  • Battery Life: The large-capacity battery is highly praised for its ability to handle many splices on a single charge.
  • Field Use: The robust design and included stool in the toolbox make it practical for field work in various environments.

11. Warranty & Support

11.1. Service Commitment:

The product comes with a five-year warranty, subject to the following conditions:

  • Exclusions: The cleaver, Miller clamp, stripping pliers, fiber holders, and other tools whose life depends on frequency of use and environment are not covered. Electrodes are consumable materials and are also not covered by the warranty.
  • Battery and Power Adapter: These components have a one-year warranty. Free warranty service is provided if they are damaged or cannot be charged within one year.
Service Commitment Details
Details of the service commitment and warranty exclusions.

11.2. Technical Support:

For after-sales service and technical support, please use the following contact information:

  • Whatsapp: +86 191**** ****
  • Skype: live:.cid.2*********
  • Email: technicalsupport@*********

This contact information is for after-sales and technical support only. For purchasing inquiries, please contact your machine provider.

12. Certifications

Signal Fire Technology Co., Ltd. has passed the ISO9001 international quality management system certification. The products have also obtained international certifications such as CE, RoHS, FCC (United States), and UKCA (United Kingdom).

Product Testing Certificates
Product testing certificates including CE, UKCA, FCC, and ISO9001.

The company also holds various international patents and trademarks, ensuring product quality and intellectual property protection.

International Patent Certificates
International Patent Certificates.
International Trademark Certificates
International Trademark Certificates.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.