VEIKK P001

Contents

VEIKK P001 Drawing Tablet Pen User Manual

Model: P001 Battery-Free Passive Stylus

Introduction

The VEIKK P001 is a high-performance battery-free passive stylus designed for use with VEIKK graphics tablets. It offers advanced features such as high pressure sensitivity and tilt recognition to enhance your digital drawing and design experience. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your P001 pen.

Compatibility: The P001 pen is specifically designed for use with VEIKK S640 and A30 graphics tablets.

Front view of the VEIKK P001 Battery-Free Passive Stylus
Figure 1: Front view of the VEIKK P001 Battery-Free Passive Stylus.

Setup

  1. Tablet Connection: Ensure your VEIKK S640 or A30 graphics tablet is properly connected to your computer via USB.
  2. Driver Installation: Install the latest drivers for your VEIKK graphics tablet from the official VEIKK website. The P001 pen operates through the tablet's drivers and does not require separate driver installation.
  3. Ready to Use: Once the tablet drivers are installed and the tablet is recognized by your computer, the P001 passive stylus is ready for use. No battery charging or pairing is required.
Graphic emphasizing the battery-free nature of the passive stylus
Figure 2: The P001 is a battery-free passive stylus, requiring no charging.

Operating the Pen

Key Features:

  • 8192 Pressure Levels: The pen detects subtle changes in pressure, allowing for precise control over line thickness and opacity.
  • ±60° Tilt Function: Supports tilt recognition, enabling natural shading and brush effects in compatible software.
  • 290 PPS Report Rate: Provides a fast and responsive drawing experience with minimal lag.
  • 5080 LPI Resolution: Ensures high accuracy and detail in your digital artwork.

Customizable Buttons:

The P001 pen features two customizable buttons on its side. By default, these buttons are often configured for:

  • Upper Button: Mouse right-click function.
  • Lower Button: Switch between pen and eraser modes.

You can customize the functions of these buttons through the VEIKK tablet driver software installed on your computer. Refer to your tablet's driver settings for configuration options.

Diagram illustrating the default functions of the pen's side buttons: right-click and switching between pen and eraser modes.
Figure 3: Default functions of the pen's side buttons.
Detailed diagram of the two customizable pen buttons, labeling them as 'Mouse right click' and 'Erase/pen' switch.
Figure 4: Detailed view of the two customizable pen buttons.
Visual representation of the 8192 Level Pressure Sensitivity, showing varying line thickness based on pressure.
Figure 5: Illustration of 8192 Level Pressure Sensitivity.
Diagram illustrating the pen's support for ±60° tilt function, showing how the angle affects the stroke.
Figure 6: The pen supports ±60° tilt function for natural drawing.

Maintenance

Replacing Pen Nibs:

Over time, the pen nib may wear down. To replace it:

  1. Gently pull out the old nib using the nib remover tool (usually included with your graphics tablet).
  2. Insert a new nib firmly into the pen barrel until it is secure.

Cleaning:

  • Wipe the pen body with a soft, dry cloth.
  • Avoid using harsh chemicals or abrasive materials, as these can damage the pen's surface.

Storage:

When not in use, store the pen in its protective pen pocket to prevent damage and loss.

Illustration of the pen pocket, showing the pen being stored.
Figure 7: Storing the pen in its protective pocket.

Troubleshooting

  • Pen not responding:
    • Ensure your VEIKK S640 or A30 graphics tablet is correctly connected to your computer.
    • Verify that the tablet drivers are installed and up-to-date.
    • Confirm that the pen is compatible with your specific tablet model (S640 or A30).
  • Pressure sensitivity issues:
    • Reinstall the tablet drivers.
    • Check the pressure sensitivity settings within the VEIKK tablet driver software.
    • Test the pen in different drawing applications to see if the issue persists.
  • Buttons not working:
    • Check the button assignments in the VEIKK tablet driver software.
    • Ensure no other software is conflicting with the pen's button functions.

Specifications

Feature Specification
Model P001
Type Battery-free Passive Stylus
Compatibility VEIKK S640 and A30 Graphics Tablets
Pressure Levels 8192
Resolution Ratio 5080 LPI
Report Rate 290 PPS
Tilt Support ±60°
Buttons 2 Customizable Buttons
Dimensions (Length x Width) 154mm x 11mm
Certifications CE, FCC, RoHS, KC, WEEE
Origin Mainland China

User Tips

  • Always ensure your VEIKK graphics tablet drivers are up-to-date for optimal pen performance and access to all features.
  • Take advantage of the customizable buttons by assigning frequently used functions (e.g., undo, zoom) to streamline your workflow.
  • Keep spare pen nibs on hand and replace them as soon as you notice wear to maintain drawing precision.

Warranty and Support

For warranty information, technical support, or further assistance, please contact VEIKK Official Store customer service or visit the official VEIKK website. Please have your product model (P001) and compatible tablet model (S640 or A30) ready when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.