SUNSUN JDP-1000, JDP-1500, JDP-2000, JDP-3500, JDP-3500Q, JDP-6000, JDP-6000Q, JDP-10000, JDP-10000Q, JDP-18000

SUNSUN JDP Series Aquarium DC Water Pump

Adjustable Submersible Pump with Intelligent Controller

1. Introduction

Thank you for choosing the SUNSUN JDP Series Aquarium DC Water Pump. This intelligent and adjustable submersible pump is designed for various aquarium and aquatic applications, offering efficient water circulation with low noise operation. This manual provides essential information for the safe and effective installation, operation, and maintenance of your pump.

2. Product Components

The SUNSUN JDP series water pump comes with the following main components:

Diagram showing the pump, outlet nozzles, controller, and power adapter.
Figure 1: Main Product Components. (1) Pump, (2) Outlet Nozzles, (3) Controller, (4) Power Adapter.
  • Pump Unit: The main submersible pump body.
  • Outlet Nozzles: Various sizes (12mm, 16mm, 20mm) for different hose connections.
  • Controller: For adjusting flow rate and activating special modes. Models JDP-1000, JDP-1500, JDP-2000 do not include a controller. Models JDP-3500, JDP-6000, JDP-10000 include a manual controller. Models JDP-3500Q, JDP-6000Q, JDP-10000Q, JDP-18000 include a WiFi-enabled controller.
  • Power Adapter: Converts input voltage to a safe DC-24V output.
  • Power Cable: Standard plug for power connection.

3. Models and Features

The JDP series offers various models with different flow rates and control options:

Image displaying different JDP pump models and their corresponding controllers.
Figure 2: Product display showing various JDP models and their controllers.
  • JDP-1000, JDP-1500, JDP-2000: These models typically operate without an external controller.
  • JDP-3500, JDP-6000, JDP-10000: These models come with a standard manual controller for flow adjustment.
  • JDP-3500Q, JDP-6000Q, JDP-10000Q, JDP-18000: These 'Q' models feature an intelligent controller with WiFi connectivity for remote control via a mobile application.

All models feature a high-quality ceramic rotor for quiet operation and durability, suitable for both freshwater and saltwater environments.

Image highlighting the low noise operation of the pump, indicating less than 30 decibels.
Figure 3: The pump operates quietly, typically below 30 decibels.

4. Setup and Installation

4.1 General Installation

  1. Connect Outlet: Attach the appropriate size outlet nozzle to the pump's outlet.
  2. Connect Controller (if applicable): For models with a controller, connect the pump to the controller using the three-needle connection cable.
  3. Connect Power Adapter: Connect the controller (or pump directly for models without a controller) to the power adapter.
  4. Power On: Plug the power adapter into a suitable electrical outlet (110-240V). The power adapter converts this to a safe DC-24V for the pump.
Wiring diagram showing connections between the pump, controller, and power adapter.
Figure 4: Installation diagram illustrating the connection points.

4.2 Underwater and Land Use

The JDP series pumps are versatile and can be used both submerged in water or externally for land-based applications.

  • Underwater Use: Ensure the pump is fully submerged in water.
  • Land Use: To use the pump externally, remove the filter cover and connect a water pipe directly to the pump's inlet.
Diagram showing the pump configured for both underwater and land use, with the filter cover removed for land use.
Figure 5: Configuration for underwater and land use.

4.3 Safety Considerations

The pump operates on a safe DC-24V voltage, converted from the standard 110-240V input by the power adapter, ensuring safety for your aquatic environment.

Image illustrating the 24V safety feature and the power adapter's role in converting voltage.
Figure 6: The power adapter converts 220V to a safe 24V DC.

5. Operation

5.1 Flow Rate Adjustment

The JDP series pumps feature a five-speed adjustment for precise control over water flow. Use the '+' and '-' buttons on the controller to increase or decrease the flow rate.

Image showing the intelligent controller with five-speed adjustment buttons.
Figure 7: Controller with five-speed adjustment.

5.2 Feeding Mode (WiFi Models)

For 'Q' models with WiFi control, you can activate a feeding mode via the mobile application. Pressing the feed mode button will automatically stop the pump for a set duration (e.g., 15 or 60 minutes), preventing food from being immediately drawn into the filter system.

Screenshot of a mobile app interface showing the feeding mode activation.
Figure 8: Mobile app interface for activating feeding mode.

5.3 Mobile Phone Remote Control (WiFi Models)

The 'Q' series pumps (JDP-3500Q, JDP-6000Q, JDP-10000Q, JDP-18000) can be controlled remotely via a dedicated mobile application. This allows for convenient adjustment of settings and monitoring from your smartphone.

Image showing a hand holding a smartphone controlling the pump via an app.
Figure 9: Mobile phone remote control for WiFi-enabled pumps.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your pump.

6.1 Cleaning the Pump

The pump features a removable grille for easy access to the impeller and internal components. Periodically remove the grille and clean any debris or buildup to maintain efficient water flow.

Image showing the removable grille and shock-absorbing feet of the pump.
Figure 10: Removable grille for easy cleaning.

6.2 Ceramic Rotor

The pump is equipped with a high-quality ceramic rotor, known for its wear-resistance and contribution to quiet operation. Inspect the rotor during cleaning for any signs of wear or damage.

Image detailing the high-quality ceramic rotor component.
Figure 11: High-quality ceramic rotor for durability and low noise.

7. Troubleshooting

  • Pump not turning on:
    • Check all power connections, including the adapter and controller (if applicable).
    • Ensure the power outlet is functional.
    • Verify the input voltage (110-240V) is correct for the power adapter.
  • Reduced flow or unusual noise:
    • Disconnect power and inspect the pump's impeller and grille for blockages or debris.
    • Clean the pump thoroughly as described in the Maintenance section.
    • Ensure the pump is properly submerged (for underwater use) or that the inlet pipe is clear (for land use).
  • Abnormal warning notifications (WiFi models only):
    • If your mobile app displays an 'Abnormal operation' or 'No-load abnormal operation' warning, check if the pump is running dry or if there's a significant blockage affecting its operation.
    • Address any issues and restart the pump.
    Mobile phone screen showing an abnormal warning notification for the intelligent frequency conversion water pump.
    Figure 12: Example of an abnormal warning notification on the mobile app.
  • WiFi connectivity issues:
    • Ensure your pump is a 'Q' model with WiFi capability.
    • Check your home WiFi network and ensure the pump is within range.
    • Follow the app's instructions for pairing the device.

8. Specifications

Below are the general specifications for the SUNSUN JDP series water pumps. Specific parameters vary by model:

Table of product parameters including Model, Input, Power, Flow, Lift, and Size.
Figure 13: Product parameters for various JDP models.
Model Input Power (W) Flow (L/h) Lift (m) Size (mm)
JDP-1000 DC-24V 12 1000 2.2 140x61x84
JDP-1500 DC-24V
JDP-2000 DC-24V
JDP-3500 / JDP-3500Q DC-24V 10-35 (5 speeds) 2300-3500 (5 speeds) 1.7-3.5 (5 speeds) 155x72x97
JDP-6000 / JDP-6000Q DC-24V 13-60 (5 speeds) 3000-6000 (5 speeds) 1.6-5.0 (5 speeds) 175x83x113
JDP-10000 / JDP-10000Q DC-24V 20-100 (5 speeds) 6000-10000 (5 speeds) 2.2-5.8 (5 speeds) 195x95x125
JDP-18000 DC-24V

Note: Power, Flow, and Lift values for JDP-3500/Q, JDP-6000/Q, JDP-10000/Q are adjustable across 5 speeds. Specific values for JDP-1500, JDP-2000, and JDP-18000 are not fully detailed in the provided data but follow similar DC-24V input.

9. User Tips

  • Power Source: The pump operates on DC-24V. If you are using an alternative power source like solar, ensure it provides a stable 24V DC output.
  • Flow Rate Verification: While the pumps are rated for high flow rates (e.g., 18000 L/h), actual performance can vary based on plumbing, head pressure, and cleanliness. Regularly check the flow to ensure it meets your aquarium's needs.
  • Controller Availability: Note that models JDP-1000, JDP-1500, and JDP-2000 do not include a controller. If you require flow adjustment, consider models JDP-3500 and above.

10. Warranty and Support

For any issues or support inquiries, please contact the seller or manufacturer directly. Keep your purchase records for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.