ElecDemo AD7606

Contents

ElecDemo AD7606 Series ADC Data Acquisition Module User Manual

Models: AD7606, ADS8688, ADS8361

1. Introduction

This manual provides detailed instructions for the ElecDemo AD7606 series of Analog-to-Digital Conversion (ADC) modules, including models AD7606, ADS8688, and ADS8361. These modules are designed for precision data acquisition in various applications, particularly in education and learning fields. They feature high-resolution, simultaneous sampling capabilities, and flexible interface options.

Please read this manual thoroughly before operating the module to ensure correct usage and prevent damage.

ElecDemo AD7606 ADC module front view

Figure 1: ElecDemo AD7606 ADC Module

2. Features

  • High Resolution: 16-bit Analog-to-Digital Conversion.
  • Multi-Channel: 8-channel (AD7606, ADS8688) or 2-channel (ADS8361) simultaneous sampling.
  • High Sampling Rate: Up to 200kSPS (AD7606), 500kSPS (ADS8688), or 250kSPS (ADS8361).
  • Flexible Interface: Supports SPI and/or Parallel communication.
  • Wide Input Range: Software-switchable input ranges (e.g., ±5V, ±10V for AD7606; 0V to 12.5V, ±12.5V for ADS8688; ±2.5V, ±5V, ±10V for ADS8361).
  • Integrated Components: Features low deviation low noise regulator chip and integrated PGA (ADS8688).
  • Compact Design: Module dimensions typically 50mm x 48mm.
  • Power Supply: Operates on DC5V.

3. Specifications

3.1. AD7606 Module Specifications

Parameter Name Value Remarks
Module Type Analog-to-Digital Converter Module ADC
Number of Input Channels 8 Simultaneous sampling
Resolution 16-bit
Sampling Rate 200kSPS Per channel
Input Range ±5V, ±10V Software switchable
Interface SPI/Parallel
Power Supply Voltage DC5V
Size 50mm*48mm
Battery Included No
Typical Application Fields Education and Learning

3.2. ADS8688 Module Specifications

Parameter Name Value Remarks
Module Type Analog-to-Digital Converter Module ADC
Number of Input Channels 8
Resolution 16-bit
Sampling Rate 500kSPS Total throughput
Input Range 0V to 5V, 0V to 10V, ±2.5V, ±5V, ±10V, ±12.5V Software switchable
Interface SPI
Power Supply Voltage DC5V
Size 50mm*48mm

3.3. ADS8361 Module Specifications

Parameter Name Value Remarks
Module Type Analog-to-Digital Converter Module ADC
Number of Input Channels 2
Resolution 16-bit
Sampling Rate 250kSPS Per channel
Input Range ±2.5V, ±5V, ±10V Software switchable
Interface Parallel
Power Supply Voltage DC5V
Size 50mm*48mm
AD7606 module with dimensions 50mm by 48mm

Figure 2: Module Dimensions (50mm x 48mm)

4. Setup

4.1. Physical Connections

Connect the module to your microcontroller or system using the following guidelines:

  • Power Supply: Connect a stable DC5V power source to the appropriate power pins (usually marked '5V' and 'GND').
  • Analog Inputs: Connect your analog signals to the AIN1-AIN8 terminals (for 8-channel modules) or corresponding input pins (for 2-channel modules). Ensure proper grounding for all signals.
  • Digital Interface: Connect the SPI or Parallel interface pins (e.g., D0-D15, CS, RD, WR, etc.) to your microcontroller. Refer to the specific module's pinout diagram for exact connections.
AD7606 module detailed pinout and configuration options

Figure 3: AD7606 Module Pinout and Configuration

4.2. Configuration (AD7606 Specific)

The AD7606 module offers configurable options via onboard resistors/jumpers:

  • Reference Source Selection:
    • Internal Benchmark: R5=10K, R6 not welded.
    • External Reference: R5 not soldered, R6=10K.
  • Serial/Parallel Data Port Selection:
    • Parallel Selection: R1 not welded, R2=10K.
    • Serial Selection: R1=10K, R2 not soldered.
AD7606 module with labeled configuration points for reference and interface selection

Figure 4: AD7606 Configuration Points

4.3. Software Setup

The module typically requires a microcontroller to control its operation and read data. Routine source code and a PDF schematic diagram are provided to assist with software development. These resources will guide you in initializing the ADC, configuring input ranges, and reading conversion results.

For detailed chip information and block diagrams, refer to the official datasheets:

AD7606 Chip Introduction and Block Diagram

Figure 5: AD7606 Chip Introduction (Block Diagram)

5. Operation

5.1. Data Acquisition Process

Once the module is correctly set up, you can initiate data acquisition:

  1. Initialization: Configure the ADC registers via the chosen interface (SPI/Parallel) to set parameters like input range and operating mode.
  2. Conversion Start: Trigger a conversion cycle. For simultaneous sampling modules, all selected channels will convert their analog input to digital values concurrently.
  3. Data Readout: Read the 16-bit digital data from the module's output registers. The method depends on whether you are using SPI or Parallel interface.
  4. Data Conversion: The raw 16-bit digital value needs to be converted to a meaningful voltage. The AD7606 uses a sign bit. For a ±5V range, 0 to 32767 corresponds to 0V to +5V, and 32768 to 65535 corresponds to -5V to 0V (where 32768-65535 is effectively -32767 to 0 as a 16-bit signed number). The same logic applies to other input ranges like ±10V.

Video 1: Product overview showing the AD7606 module rotating.

6. Troubleshooting

  • Q: How much sampling rate can AD7606 serial data reach?
    A: Theoretically, 8-channel 200kSPS serial data output can be achieved. However, the actual sampling rate may be limited by the main frequency and I/O speed of the microcontroller used.
  • Q: Is there any problem if the CA and CB pins on the back of the board are shorted together?
    A: No, this is normal. According to the schematic diagram, CA and CB are connected together through a jump point.
  • Q: After the module is driven normally, the pins that are not connected to voltage show that there is voltage, is it normal?
    A: Yes, this is normal. The module collects 8 channels simultaneously by default. When no voltage is connected, the floating voltage on the pin is also collected. To get a 0V reading, the unused pins can be directly grounded.
  • Q: Is the maximum value 65535? How is this data converted?
    A: The most significant bit of the AD7606 output is the sign bit. For a ±5V range, values from 0 to 32767 correspond to 0V to +5V. Values from 32768 to 65535 correspond to -5V to 0V. This range (32768-65535) is a 16-bit unsigned integer, which is equivalent to -32767 to 0 when interpreted as a 16-bit signed number. The same conversion logic applies to other input ranges like ±10V.

7. User Tips

  • Power Supply: Always ensure a stable DC5V power supply to the module. Incorrect voltage can lead to malfunction or permanent damage.
  • Grounding: For accurate readings, ensure all analog input signals are properly grounded. Ground any unused analog input pins to prevent floating voltage readings.
  • Reference Selection: When using an external reference, carefully verify that the correct resistors (R5, R6) are soldered or not soldered as per the configuration diagram (Figure 4).
  • Microcontroller Speed: Be aware that achieving the theoretical maximum sampling rates, especially for serial data, can be limited by the processing speed and I/O capabilities of your chosen microcontroller.
  • Documentation: Always refer to the provided PDF schematic diagram and routine source code for detailed connection and programming examples.

8. Maintenance

To ensure the longevity and optimal performance of your ADC module, follow these maintenance guidelines:

  • Cleanliness: Keep the module clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
  • Static Protection: Handle the module with care, especially in environments prone to static electricity. Use anti-static precautions (e.g., anti-static wrist strap) when handling.
  • Storage: When not in use, store the module in its original electrostatic bag or a similar anti-static container in a dry, cool place.
  • Avoid Physical Stress: Do not apply excessive force to the connectors or components.

9. Warranty & Support

The ElecDemo ADC module comes with a manufacturer's limited warranty of 3 months for accessories, covering defective items (excluding items damaged or misused after receipt).

For technical support, please utilize the provided PDF schematic diagram and routine source code. These resources offer comprehensive details for integration and programming. If you encounter further operational problems or require assistance, please contact ElecDemo customer service.

A detailed user manual in PDF format is also available for download:

Download User Manual (PDF)

© 2023 ElecDemo. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.