1. Introduction
The ElecDemo AD9954 DDS Module is a high-speed, high-performance Direct Digital Synthesizer (DDS) designed for generating agile analog output sine waves up to 150MHz. It features two complementary sine wave outputs with a 150MHz low-pass filter and one-way square wave output. Built with a high-speed, high-performance DAC, it offers precise frequency tuning (0.01Hz or higher resolution) and phase harmonics (0.022° interval). The module supports fast frequency hopping and flexible frequency sweep functions, making it suitable for various frequency signal generation, sine wave, square wave signal generation, and sensor excitation applications.
Video 1.1: 360-degree view of the AD9954 DDS Module.
2. Package Contents
Upon receiving your AD9954 DDS Module, please verify that all the following items are included:
- AD9954 DDS Module
- PDF schematic representation (available upon request after purchase)
- Routine source code (available upon request after purchase)
- After-sale technical support information
- Electrical bag packaging
- Shockproof foam
3. Specifications
| Feature | Specification |
|---|---|
| Module Model | AD9954 |
| Module Type | Digital Synthesis Frequency Source |
| Power Supply | DC-5V (Do not exceed 5.5V) |
| Module Current | 100mA (MAX); Quiescent: 48mA (TYPE); Normal: 92mA (TYPE) |
| Communication Protocol | SPI Serial |
| Routine Platform | STM32F103X-M3 KEIL5 version source code |
| System Main Frequency | 400MHz (MAX) |
| DAC Resolution | 14 digits |
| Phase Accumulator Bits | 32 bits |
| Output Interface | SMA (24-hour salt spray anti-oxidation) |
| Output Signals | Sine wave (with 150MHz low-pass filter), Square wave (shaft coupling output) |
| Output Channels | 2 differential channels; 180-degree phase difference (high frequency output may have phase shift due to filter) |
| Sine Wave Output Range | 1Hz-140MHz |
| Square Wave Output Range | 1Hz-120MHz (10MHz or more requires 50 ohms oscilloscope input impedance) |
| Output Amplitude | Sine wave: 200mVpp (MAX); Square wave: 3.3 Vpp (Sine wave amplitude decreases with increasing frequency, square wave waveform changes with increasing frequency) |
| Output Impedance | 75 ohms |
| Dimensions (L*W*H) | 70mm * 60mm * 12mm (PCB size) |
| Weight | 35g |
| Interface Type | SMA signal output, external clock input, DC 5.5 socket, XH 2.54 dual-row pin data interface |

Image 3.1: Module features including 400M frequency, adjustable phase, and high-speed comparator.

Image 3.2: Module dimension drawing (70mm x 60mm).
4. Setup
Follow these steps to properly set up your AD9954 DDS Module:
- Power Supply: Connect a stable DC-5V power supply to the module's DC 5.5 socket. Ensure the voltage does not exceed 5.5V. For optimal performance and to avoid interference, it is recommended to use a linear power supply.
- Data Interface: Connect your STM32F103RCT6 control board (or compatible microcontroller) to the module's XH 2.54 dual-row pin data interface using the SPI serial communication protocol.
- Clock Input: The module has an onboard 20MHz crystal oscillator for its system clock. If an external clock is desired, connect it to the designated external clock access port.
- Output Connections: For observing the output signals, connect SMA on BNC cables to the SMA output interfaces (OUT1 and OUT2 for sine waves, and the square wave output). Ensure good quality cables and connections to prevent signal attenuation or excessive noise.
- Power-up Sequence: When integrating with a control board, always supply power to the DDS module first, and then to the control board. This sequence helps in proper initialization and waveform generation.

Image 4.1: Module interface diagram with labeled components.

Image 4.2: Pinout diagram for connecting STM32 microcontroller to AD9954.
5. Operating Instructions
The AD9954 DDS Module is controlled via an SPI serial interface, typically by a microcontroller like the STM32F103RCT6. The provided routine source code facilitates basic operation.
- Frequency Control: The main frequency of the output signal is determined by the input clock and the program. With the onboard 20MHz clock, the program can control the frequency at 20 times, resulting in a standard main frequency of 400MHz. Adjusting the program parameters will change the output frequency.
- Amplitude Control: The output amplitude of the sine wave can be controlled by modifying the 14-bit amplitude register within the module's programming. Note that sine wave amplitude decreases with increasing frequency.
- Waveform Generation: The module generates both sine and square waves. The sine wave output includes a 150MHz low-pass filter.
- Frequency Sweep: The module supports frequency sweep functionality. The provided code includes support for software single-tone sweep. For other sweep modes or advanced modulation, custom programming of the module is required.
- Square Wave Characteristics: The square wave output's duty cycle is not adjustable. Its waveform may change with increasing frequency.
- Modulation: Low-speed Amplitude Modulation (AM) can be achieved by dynamically changing the amplitude register through programming.
Note on Signal Characteristics:
- The sine wave output has no coupling and includes its own DC component. When connecting to radio frequency equipment, a DC block must be added.
- For accurate measurements of square waves at 10MHz or higher, an oscilloscope with a 50 ohms input impedance is required.

Image 5.1: Example sine wave outputs from the module.
Image 5.2: Example square wave outputs from the module.

Image 5.3: Example mixed waveform outputs from the module.
6. Maintenance
To ensure the longevity and optimal performance of your AD9954 DDS Module, please adhere to the following maintenance guidelines:
- Power Supply: Always use a stable DC-5V power supply and never exceed 5.5V. Overvoltage can permanently damage the module.
- Cleanliness: Keep the module clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or harsh chemicals.
- Handling: As a high-precision device, handle the module with care. Avoid dropping it or subjecting it to physical shocks.
- Storage: Store the module in a dry, static-free environment when not in use.
- Connections: Regularly check all connections for proper contact. Loose or poor-quality cables can lead to signal degradation.
7. Troubleshooting
If you encounter issues with your AD9954 DDS Module, refer to the following common problems and solutions:
Common Issues & Solutions:
- No Output Signal or Weak Signal:
- Verify the power supply is correctly connected and providing a stable DC-5V.
- Check all SMA and data port connections for proper contact. Poor contact or low-quality cables can cause signal attenuation or excessive noise.
- Ensure the power-up sequence is correct (DDS module first, then control board).
- Incorrect Frequency or Amplitude:
- Review your control program to ensure the frequency and amplitude registers are set correctly.
- Confirm the system main frequency is correctly configured (onboard 20MHz clock, program control 20x for 400MHz).
- Square Wave Duty Cycle Not Adjustable:
- This is a design characteristic of the module; the square wave duty cycle is not adjustable.
- Difficulty with Advanced Modulation or Sweep Modes:
- The provided code supports basic single-tone sweep. For more complex modulation (e.g., AM beyond low-speed amplitude register changes) or other sweep modes, custom programming is required.
- Interference or Noise in Output:
- Ensure you are using a linear power supply to minimize interference.
- Use high-quality, shielded SMA to BNC cables for output connections.
- If connecting to RF equipment, remember to add a DC block due to the sine wave's inherent DC component.
If problems persist after attempting these solutions, please consult customer service for further assistance.
8. User Tips
Based on user experiences and common inquiries, here are some tips for getting the most out of your AD9954 DDS Module:
- Stable Power is Key: Always prioritize a clean, stable DC-5V linear power supply. This is crucial for the module's high-precision operation and to minimize unwanted noise in your signals.
- Quality Cables Matter: Invest in good quality SMA to BNC cables for your output connections. Cheap or damaged cables can significantly degrade signal integrity, leading to inaccurate measurements and performance.
- Understand Programming Requirements: While basic routines are provided, unlocking the full potential of the AD9954 for advanced modulation, precise frequency/amplitude control, or specific sweep modes will require custom programming. Familiarity with STM32 microcontrollers and SPI communication is beneficial.
- DC Blocking for RF: Remember that the sine wave output has a DC component. If you're feeding the signal into sensitive RF equipment, always use a DC block to prevent potential damage or incorrect operation.
- Oscilloscope Impedance: When measuring square waves at frequencies of 10MHz or higher, ensure your oscilloscope input impedance is set to 50 ohms for accurate readings.
9. Warranty and Support
ElecDemo guarantees that all modules are thoroughly tested and verified for their parameters, functions, and images before dispatch. We are committed to providing accurate product information and reliable performance.
- Warranty Period: The AD9954 DDS Module comes with a 3-month limited warranty on defective items, excluding items damaged or misused after receipt.
- Technical Support: After purchasing the module, please contact customer service to receive the PDF schematic representation and routine source code. Our team is available to provide after-sale technical support for operational problems.
- Programming Support: The supplied code is intended for use with a supporting main control board and does not include a microcontroller tutorial. Additional functions beyond the standard routines must be developed by the user.
For further documentation, including a user manual in PDF format, please refer to the following resource: AD9954 DDS Module User Manual (PDF)