Product Description
This manual provides instructions for the replacement and upgrade parts for most FMS RC airplanes, specifically for the FMS 70mm A10 A-10 V1 EDF Ducted Fan Jet. These parts include retract landing gear sets, system doors, motors, servos, and various other components necessary for assembly and maintenance.

Parts List
The following is a list of available parts for the FMS 70mm A10 A-10 V1 EDF Jet. Please ensure you have all necessary components before beginning assembly.
- Main Retract:

Main Retract - Front Retract:

Front Retract - Main Gear System:

Main Gear System - Front Gear System:

Front Gear System - Front Gear Door:

Front Gear Door - Main Gear Set:

Main Gear Set - Front Gear Set:

Front Gear Set - Canopy Set:

Canopy Set - Decal Sheet:

Decal Sheet - Screw Set:

Screw Set - Tire Set:

Tire Set - Multi Connector:

Multi Connector - 17g Digital Metal Servo:

17g Digital Metal Servo - 13g Digital-Positive Servo:

13g Digital-Positive Servo - 13g Digital-Reverse Servo:

13g Digital-Reverse Servo - Fan Only (Impeller):

Fan Only (Impeller) - Ducted Fan (no motor):

Ducted Fan (no motor) - Ducted Fan with Motor:

Ducted Fan with Motor - 3060 KV1900 Motor:

3060 KV1900 Motor - Control Horns:

Control Horns - Linkage Rods:

Linkage Rods - Scale Plastic Parts:

Scale Plastic Parts

Installation Guide
Follow these steps for proper installation of your FMS RC airplane accessories:
- Check all parts before installation for damage or defects.
- Install accessories in correct position and direction.
- Fasten screws properly. Do not over-tighten.
- Test all moving parts freely before flight.
- Complete full ground test before first flight.




Operating Instructions
After successful installation and ground testing, operate your RC airplane in safe and open areas. Always ensure all moving parts function freely before each flight. Adhere to all safety guidelines to prevent damage or injury.
Safety Instructions
- Stop operation immediately if abnormal vibration, noise or failure occurs.
- Do not fly in strong wind, rain, fog or bad weather.
- Keep away from people, buildings, power lines and roads.
- Operate only in safe and open areas.
Warning
- This is a hobby product, not a toy.
- Not suitable for children under 14 without adult supervision.
- Improper installation or operation may cause injury or damage.
Maintenance
- Clean parts after each flight.
- Regularly check propellers, screws and linkages.
- Replace damaged parts in time.
- Store in dry and clean environment.
Troubleshooting
If you encounter issues, first review the installation guide and ensure all parts are correctly installed and secured. Check for any visible damage or loose connections. If a part is not functioning as expected, refer to the 'After Sales' section for support.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | YOUKOOL (FMS) |
| Model Number | FMS 70mm A10 |
| Material | Composite Material |
| For Vehicle Type | Airplanes |
| Tool Supplies | Assembled class |
| Use | Vehicles & Remote Control Toys |
| Is Electric | No battery |
| Is it battery/power supply | N |
| Is it charger/adapter | N |
| Is Batteries Included | No |
| High-concerned chemical | none |
| Recommend Age | 14+y |
| Origin | Mainland China |
Individual Component Specifications
- 17g Digital Metal Gear Servo: Positive with 700mm Cable Length. New with better performance.
- 13g Digital Full Metal Gear Servo: (with 300mm cable length). Replaces discontinued 9g metal half-metal gear servo.


User Tips
- Always double-check the received parts against the product description and images to ensure you have the correct components for your specific model.
- For questions regarding specific part weights, such as landing gears, consult the seller directly for detailed specifications if not listed.
Warranty and Support
After Sales
If you receive defective or wrong items, please contact us for support.
Manufacturer Information
Manufacturer: Foshan Zhengze Model Technology Co., LTD
Address: Unit A, Building 6, Jicheng Science Technology Innovation Park, Shunde, Foshan city, Guangdong province, 528306.
Email: fmsmodel@yeah.net
Made in: China
EU Responsible Information
Firmenname: E-CrossStu GmbH
Adresse: Felix-Dahn-Str 4 70597 Stuttgart
Email: E-CrossStu@web.de
For a comprehensive guide, you may also refer to the official User Manual (PDF).