ORVIBO R30W3Z

Contents

ORVIBO In-wall Smart Zigbee Switch User Manual

Model: R30W3Z

1. Introduction

The ORVIBO In-wall Smart Zigbee Switch (Model: R30W3Z) is designed to transform your traditional wired light switches into smart, app-controlled devices. This smart switch integrates seamlessly into your smart home ecosystem via an ORVIBO Zigbee Hub (sold separately), allowing for remote control, scheduling, and voice command capabilities. It is available in two versions: a Signal Live version (no neutral wire required) and a Neutral and Live version (requires a neutral wire).

Please read this manual carefully before installation and use to ensure proper operation and safety.

2. Safety Information

  • Always turn off power at the circuit breaker before installing or servicing the switch.
  • Installation should be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.
  • Do not exceed the maximum load ratings specified for the device.
  • Ensure the switch is installed in a dry indoor environment.
  • Keep out of reach of children.

3. Package Contents

  • ORVIBO In-wall Smart Zigbee Switch (R30W3Z)
  • User Manual

Note: The ORVIBO Zigbee Hub is required for smart functionality and is sold separately.

ORVIBO In-wall Smart Zigbee Switch module

Image: ORVIBO In-wall Smart Zigbee Switch module.

ORVIBO Zigbee Hub

Image: ORVIBO Zigbee Hub, required for smart features.

4. Specifications

FeatureSpecification
Model NumberR30W3Z
Power SourceAC 100-240V~, 50/60Hz
Communication MethodZigbee 3.0
Max Load (Signal Live Version)200W
Max Load (Neutral and Live Version)600W
Operating Temperature-20℃ to 50℃
Dimensions46 x 46 x 18 mm
State of AssemblyReady-to-Go (requires installation)
CertificationCE

5. Setup and Installation

Before you begin, ensure you have an ORVIBO Zigbee Hub connected to your network and the ORVIBO Home App installed on your smartphone.

5.1. Wiring Instructions

  1. Turn off power: Locate your circuit breaker and turn off the power to the switch you are replacing. Verify the power is off using a voltage tester.
  2. Identify your wiring: Carefully remove your existing switch from the wall box. Determine if you have a neutral wire available.
    • Signal Live Version (No Neutral Wire): This version is suitable for installations where only live wires are present in the switch box. Connect the Live wire (L) to the L terminal on the ORVIBO switch and the Load wire (L1) to the L1 terminal.
    • Neutral and Live Version (Neutral Wire Required): This version offers higher load capacity and requires a neutral wire. Connect the Live wire (L) to the L terminal, the Neutral wire (N) to the N terminal, and the Load wire (L1) to the L1 terminal.
  3. Connect the ORVIBO switch: Follow the specific wiring diagram for your version of the switch. Ensure all connections are secure.
  4. Mount the switch: Carefully place the ORVIBO smart switch into the wall box and secure it. Reinstall the wall plate.
  5. Restore power: Turn the power back on at the circuit breaker.

Note: Detailed wiring diagrams are typically provided in the product packaging. If you are unsure about any wiring steps, consult a qualified electrician.

5.2. Pairing with ORVIBO Zigbee Hub

  1. Open ORVIBO Home App: Launch the ORVIBO Home application on your smartphone.
  2. Add Device: Navigate to the "Add Device" or "+" icon within the app.
  3. Select Switch: Choose "Switch" or "Smart Switch" from the device categories.
  4. Enter Pairing Mode: On the ORVIBO In-wall Smart Zigbee Switch, press and hold the physical button for approximately 5-10 seconds until the indicator light starts blinking rapidly. This indicates it's in pairing mode.
  5. Discover Device: Follow the on-screen instructions in the ORVIBO Home App to discover and add the switch.
  6. Name Device: Once discovered, you can name your switch (e.g., "Living Room Light") and assign it to a specific room.

6. Operating the Smart Switch

6.1. Manual Control

You can still operate the connected light or appliance by pressing the physical button on the traditional switch that the ORVIBO module is connected to. A single press will toggle the power on/off.

6.2. App Control

Once paired with the ORVIBO Zigbee Hub, you can control the switch remotely using the ORVIBO Home App:

  • On/Off: Tap the switch icon in the app to turn the connected device on or off.
  • Scheduling: Set up schedules or timers for automatic on/off operations.
  • Scene Linkage: Create smart scenes to control multiple devices simultaneously (e.g., "Good Morning" scene turns on lights and opens blinds).

6.3. Voice Control (via ORVIBO Hub)

If your ORVIBO Zigbee Hub is integrated with voice assistants like Amazon Alexa or Google Home, you can control the switch using voice commands. Ensure your ORVIBO account is linked in the respective voice assistant app.

  • "Alexa, turn on Living Room Light."
  • "Hey Google, turn off Bedroom Light."

7. Maintenance

  • Keep the device clean and free from dust. Use a soft, dry cloth for cleaning.
  • Do not use liquid cleaners or aerosols.
  • Ensure the device is not exposed to extreme temperatures or humidity.
  • Regularly check for firmware updates via the ORVIBO Home App to ensure optimal performance and security.

8. Troubleshooting

  • Switch not responding to app:
    • Check if the ORVIBO Zigbee Hub is online and connected to your network.
    • Ensure the smart switch is within range of the Zigbee Hub.
    • Verify the power to the switch is on.
    • Try re-pairing the switch with the hub.
  • Indicator light not blinking during pairing:
    • Ensure the switch has power.
    • Press and hold the button for the correct duration (5-10 seconds).
  • Switch does not turn on/off connected light:
    • Turn off power at the circuit breaker and recheck all wiring connections.
    • Ensure the connected load does not exceed the maximum wattage for your switch version (200W for Signal Live, 600W for Neutral and Live).
    • Confirm the light bulb or appliance is functional.
  • Is it a dimmer?
    • No, the ORVIBO In-wall Smart Zigbee Switch is an on/off switch and does not support dimming functionality.

8.1. User Tips

  • When installing, clearly identify your existing wiring (Live, Neutral, Load) to select the correct version of the ORVIBO switch (Signal Live or Neutral and Live).
  • For optimal performance, ensure your ORVIBO Zigbee Hub is centrally located and not obstructed by large metal objects.
  • Regularly check the ORVIBO Home App for firmware updates for both the hub and the switch to benefit from new features and improvements.

9. Warranty and Support

For warranty information, technical support, or further assistance, please refer to the official ORVIBO website or contact their customer service directly. Keep your purchase receipt as proof of purchase.

© 2023 ORVIBO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.